You’re saying you think anything less than an N95 has 0 effectiveness. Why do you believe this is likely? Are you aware of the data that says otherwise?
https://news.ycombinator.com/item?id=22655436
https://www.researchgate.net/publication/258525804_Testing_t...
https://jamanetwork.com/journals/jama/fullarticle/2749214
“As worn by health care personnel in this trial, use of N95 respirators, compared with medical masks, in the outpatient setting resulted in no significant difference in the rates of laboratory-confirmed influenza.”
To be clear, this trail was for outpatient care — not necessarily applicable to shoving tubes down throats, but probably applicable to people walking down the street.
> However, these masks would provide the wearers little protection from microorgan- isms from others persons who are infected with respiratory diseases. As a result, we would not recommend the use of homemade face masks as a method of reducing transmission of infection from aerosols.
The recommendation here is assuming you have access to something better. If you have no access to something better, a homemade mask is better than no mask at all, until you can get something better. As others have pointed out here, it’s rather odd to suggest we should scoff at this imperfect solution, when there are no perfect solutions short of 100% full and complete quarantine, which is completely unrealistic.
There's a lot of variation in influenza viruses, but most are spheroids or ellipsoids with a diameter from 80-120 mm.
For simple mechanical filtering, such as with a mask, they are going to behave pretty similar.
For medical professionals in close contact with patients and dealing with airborne-protocol pathogens (which is what a droplet-mediated pathogens like SARS2 becomes classed as once patients are coughing and being intubated) then a bad mask is quite probably worse then no mask (this has precedent: ineffective masks obstruct breathing, which makes you take deeper breaths and draw more particles in deeper in your lungs - it's a big problem when dealing with fine dusts in construction).