News for hackers. Stuff that matters.
Re:A Tale of Two Ships [pdf] by gk1 on Monday March 09, 2020 @11:30AM (#22526169)
In ~2009 I worked with the engineering manager for this class of ship. Can confirm it was chaotic. Not in the sense that we didn't know what we were doing, but in the sense that every other week some crazy issue would come up.

At one point I had to inventory every... single... weld... on the ship because we questioned their quality.

At another time (2007), a diesel engine en route to the ship fell off a truck and crushed a car, barely missing a woman who was sleeping in the back. Nothing to do with the ship's quality, but imagine getting that news while already putting out so many fires.

On the bright side, I got to be onboard one of these ships during a multi-day sea trial, which was a lot of fun.

With all that said... It is completely unhelpful to compare the cost of a military ship to a commercial ship. The commercial ships are very simple and cookie-cutter[1], unlike military ships that are almost always new designs and involve complex, integrated systems such as communication, defense, hospitals, refueling, etc, etc.

[1] I wrote about this just last week: https://www.gkogan.co/blog/simple-systems/

Re:A Tale of Two Ships [pdf] by linksnapzz on Monday March 09, 2020 @12:40PM (#22526796)
The commercial ships are very simple and cookie-cutter[1], unlike military ships that are almost always new designs and involve complex, integrated systems such as communication, defense, hospitals, refueling, etc, etc.

So, subsequent hull numbers for San Antonio class ended up being cheaper than 100% over budget? Likewise, is it customary for STX or Chantiers de l'Atlantique or Fincanterei to have to double-check the status of every single weld in ship they've delivered, or are the owners of cruise lines tolerant of massive cost overruns && late delivery?

Re:A Tale of Two Ships [pdf] by gk1 on Monday March 09, 2020 @01:05PM (#22527074)
Generally, the first ship of any class suffers the most issues. Similar to the first version of any major OS/software release. I don't remember the per-ship costs off-hand but I'd be surprised if they were higher than the first.

Unfortunately the Navy doesn't have much choice in who builds their ships. They must be built in the US, and there are very few capable shipbuilders still left in this country. It's a terrible business to be in, so there's no incentive for companies to jump into the market because the margins are razor-thin. In fact, Northrop Grumman got out of the market a few years ago (http://investor.northropgrumman.com/news-releases/news-relea...).

(As an aside, cruise ships are still cookie-cutter compared to military ships.)

To borrow a quote from Churchill, "[the current ship procurement process] is the worst form of [procurement], except for all those others that have been tried."

Re:A Tale of Two Ships [pdf] by linksnapzz on Monday March 09, 2020 @01:25PM (#22527361)
Cruise ships are cookie-cutter designs relative to military ships due to...more ships per class (model)? Lack of armament?

They are still made of steel, are welded/riveted together in modules, and must be watertight. Is the knowledge of how to properly weld a hull-section for a commercial ship utterly nontransferable to military work?

Re:A Tale of Two Ships [pdf] by gk1 on Monday March 09, 2020 @01:37PM (#22527510)
One of them is a war machine made by the world's richest country to defeat the war machines of other very rich countries.

The other is a floating hotel.

Re:A Tale of Two Ships [pdf] by jandrese on Monday March 09, 2020 @03:03PM (#22528566)
At the very least the floating hotel can theoretically be built out of several nearly identical sections, since hotel rooms are largely all the same fore to aft. Cargo ships have the same benefit.

That said, most of the cost savings is probably just economies of scale. Civilian fleets are much larger than military fleets.

Re:A Tale of Two Ships [pdf] by LgWoodenBadger on Monday March 09, 2020 @03:15PM (#22528680)
Does a machine's purpose change how the welding for that machine is done?
Re:A Tale of Two Ships [pdf] by at_a_remove on Monday March 09, 2020 @06:59PM (#22530847)
Yes.

I learned a couple of afternoon's worth of welding (TIG and MIG, with a dash of spot) and looked at some books regarding it. I realized that I was staring into a piece of craft that would take years to actually master the nuances of, if I were even capable of it.

Very much, yes. Yes because of the probably different steels in a cruise ship versus a battleship, yes because of lifetime expectancies, yes because of stresses expected, yes because of inspection schedules. I probably don't have even a good enough sense of what is required to come up with half of where the differences would lie.

Re:A Tale of Two Ships [pdf] by timonovici on Monday March 09, 2020 @06:18PM (#22530489)
Probably because of different alloys used, different thickness. You don't expect a commercial ship to be shot at with missiles.
Re:A Tale of Two Ships [pdf] by mcguire on Monday March 09, 2020 @01:41PM (#22527563)
Why is building a house cheaper than building a ship?
Re:A Tale of Two Ships [pdf] by briffle on Monday March 09, 2020 @02:02PM (#22527835)
How many people try shooting at your house?
Re:A Tale of Two Ships [pdf] by mcguire on Monday March 09, 2020 @01:38PM (#22527529)
I completely agree with you (15kt and 22kt are very different, for one thing), but...

"If the mechanical linkage fails, hook a chain to both sides of the rudder and pull in the direction you want!"

How many people does that take? Can you really do it with a crew of 13?

Re:A Tale of Two Ships [pdf] by lb1lf on Monday March 09, 2020 @01:55PM (#22527750)
You'd use chain pulleys. I work for a company making (among other things) rudder steering machines, and they are typically engineered to never fail.

As a first-order approximation, that holds true. (In the event of a black-out, there are redundant power supplies and mechanical fallback controls (think big, geared control wheel) - or also hand-crank pumps and hydraulic valves.

It is far more common for the rudder to fall off than for the steering machine to fail catastrophically.

Re:A Tale of Two Ships [pdf] by jandrese on Monday March 09, 2020 @03:05PM (#22528578)
In WWII it wasn't uncommon for rudder assemblies to jam when struck by shells or torpedoes, but that era is long since over.
Re:A Tale of Two Ships [pdf] by lb1lf on Monday March 09, 2020 @04:27PM (#22529377)
Given sufficient force, anything fails - but the steering gear is typically fine even after the rudder has fallen off; replace bearings, new rudder stock, new rudder, off you go.

(Or, as the C/E on a vessel I attended once put it - there are two machines on this vessel which CAN NOT FAIL. The steering gear and this one. (As he poured me a coffee from the engine control room Moccamaster...)

Re:A Tale of Two Ships [pdf] by mojomark on Monday March 09, 2020 @05:28PM (#22530018)
Hello PMS 317 support! The reason we checked ALL of those welds is one of the many many reasons why U.S. ships will remain afloat and remain 'in the fight' in time of war while other's won't. Protecting your country isn't always glamorous and often a thankless task.

Also, I'm not saying government program offices are perfect. There are certainly lazy, incompetent, and ignorant people. However, these types of people are in every industry. For the most part, I've worked with several very talented folks who are patriots and vigorous stewards of tax payer dollars (because guess what - we are all tax payers). Not all great talents, but there is a fair amount.

The subject paper isn't worth the handful of photons that scorched my retinas when I read it.