A lot of video cards and some monitors will negotiate a DisplayPort link over HDMI ports and HDMI cables.
For instance, my Intel NUC has only a single HDMI port, but plug a HDMI to DisplayPort cable in, and it'll negotiate a DisplayPort 1.2 connection to my Dell U2711 at 2560x1440@60hz. Plug a HDMI to HDMI cable in, and plug into the HDMI port on the same monitor - no bueno, it's HDMI only and we're stuck at 1920x1200.
Another monitor, I forget the brand, was happy to negotiate DisplayPort over a HDMI port.
Introducing USB-C adapters into the mix and some adapters appear to support USB-C Alternate Mode to carry DisplayPort but only have HDMI connectors, others won't.
Then we run into potential issues where the video card's outputs may not have been wired into the USB-C controller. Though this afaict is mostly applicable to desktops with discrete GPUs.
Don't know if it's the case for you: the older version of the adapter was limited to 30Hz @ 4K. Only the latest version supports 60Hz @ 4K.
I have both and unfortunately they look very similar. Only the fineprint gives a clue which is the newer version.
https://9to5mac.com/2019/08/08/new-apple-usb-c-digital-av-mu...
I asked myself the same question, and I guess it is either one of the following:
a) 65W is what the reasonably priced chipsets available on the market support, and it would take a lot of costly auxiliary parts to support 100W
b) its a heat management problem
I can't remember the exact terminology, but there are basically two types of adapters: active and passive. Passive adapters defer some of the work to software on the computer while active have everything needed built in.
All Apple adapters are passive and because of that when you try to use them with non-Apple computers that don't have the expected software/driver...they don't work.
It's been a while but I experienced this with mini-display port to DVI adapters. I don't know if it carriers over to other types as well.
Many graphics cards have these, but it's VERY unclearly marked on most things.
See: https://en.wikipedia.org/wiki/DisplayPort#DisplayPort_dual-m...
If you have a DP++ port, then it can basically act as an HDMI port with a passive adapter. If not... well, tough luck.
A lot of other solutions especially if you need single cable operation and >65W or especially 96W charging for the 16” MacBook Pro are active hubs that cost well over $100.
But those are all cheaper and more flexible and cross platform than buying the 27” UltraFine display. My eyes can’t tell the difference between the UltraFine and the 4K 27” LG display that cost me $290.
I use just a cheap USB-C - DP cable for this. Works fine. Of course no USB ports and can't charge with that, but not a huge issue since there are more ports.
My display has two HDMI and one DisplayPort, so I’ve allocated one HDMI for USB-C Macs, one HDMI for the desktop Windows PC, and one DisplayPort for Mini DisplayPort devices (2015 MacBook Pro).
In my opinion, buying a two-port MacBook Pro of any kind is a mistake for this very reason, although I guess more adapters can solve that problem...
Yes it does. I use it every day. Might be your adapter.
Plenty of non-Apple products don’t support 4K 60Hz and plenty of non-Apple laptops require some kind of adapter to connect to a full size HDMI port, like the current XPS 13.
In fact, Apple switching to USB-C was moving from a proprietary connector (MagSafe) to an industry standard. So I’m struggling to figure out how that’s user-hostile. It’s better than all the business laptops with proprietary dock ports or the proprietary surface connector.
I guess it sucks that I was an early adopter and I got the early adapter but on the other hand 4K displays weren’t anywhere near affordable in 2016.
My crappy Apple USB-C Multiport adapter simply refuses 60Hz 4K on an HDMI cable that works out of the box with Windows 10 on a GTX 1060. This is despite the fact that the product page says that this configuration with my particular Mac is supported (edit: it’s actually because I have an old adapter).
Then I use a cheap $8 USB-C to HDMI cable and it works fine on two MacBook Pro 15/16” computers (be careful here as a 2016 USB-C MacBook Pro 15” doesn’t support 4K 60Hz over HDMI but the identical-looking 2017 model and newer do).
Frustratingly, Apple doesn’t make a similar USB/power/video adapter for DisplayPort, just for HDMI. Nobody else seems to make one either unless you get into the world of expensive hubs.
For our older 2015 MacBook Pro, Thunderbolt 2/mini displayport to DisplayPort is the option.
What I’m getting at in a poorly organized fashion is that the world of single cable charge and display and device hub is definitely not here. There’s one display on the market that supports USB-C charging above 85W and it only works with newer Macs.
You can get basically the same display for $1000 less with an LG 27” 4K display and just use DisplayPort and HDMI with adapters. Saving yourself from plugging in a second thing isn’t worth $1000.
I can’t for the life of me figure out why the people who make displays with built in power supplies for USB-C charging didn’t just default it on the 100W maximum that the spec allows. What short-sighted design!
In any event, I think I don’t mind keeping that piece of hardware separate from my display, not just for reliability but for weight and bulk as well. I can easily hide a power brick under the table.