News for hackers. Stuff that matters.
Re:What made the 1960s CDC6600 supercomputer fast? by kragen on Saturday February 15, 2020 @10:32AM (#22335815)
The first commercial GPU might have been the LDS-1 from Utah in 1969, which was indeed used for FPS gaming: https://en.m.wikipedia.org/wiki/LDS-1_(Line_Drawing_System-1...

But it built on the history of “display processors” already in use: http://www.cap-lore.com/Hardware/Wheel.html

I had thought that computers of the time didn't have enough RAM for a framebuffer, but evidently the CDC6600 did, with what we would call 982 kilobytes today.

Re:What made the 1960s CDC6600 supercomputer fast? by RantyDave on Saturday February 15, 2020 @05:28PM (#22338474)
Dedicated matrix multiply in 1969. Damn! people in the past, they were nuts.
Re:What made the 1960s CDC6600 supercomputer fast? by tpmx on Monday February 17, 2020 @12:48PM (#22349230)
I get this realization all of the time when reading about and exploring past innovations (it's one of my primary hobbies). The really smart people back then were just as smart as the really smart people today. It's just they had crappier tech and less knowledge to work with.

"On the shoulder of giants" is an old and very true statement.

Re:What made the 1960s CDC6600 supercomputer fast? by Accujack on Monday February 17, 2020 @03:37PM (#22350489)
It was originally meant as a dig at the height of some fellow scientists, really.
Re:What made the 1960s CDC6600 supercomputer fast? by tpmx on Saturday February 15, 2020 @02:00PM (#22337154)
Yeah, I guess bitmapped "GPUs" were considered an extreme luxuary/waste of money back then.
Re:What made the 1960s CDC6600 supercomputer fast? by kragen on Sunday February 16, 2020 @07:25PM (#22344639)
I suspect they were considered an inefficient use of memory. The TX-0 and PDP-1 had screens of about a million points. For uses like plotting data, playing video games, or drafting mechanical linkages, this resolution is highly desirable — I've done CAD on a 320×200 CGA screen, and the screen resolution was extremely limiting. (For those who haven't used one, this resolution is such that you can fit 25 lines of 40-column text on it before readability starts to suffer.)

You could imagine putting something like a 320×200 CGA on a CDC 6600, taking what we would now call 16000 bytes of memory, at a cost of around US$40 000 in 1965 (https://jcmit.net/memoryprice.htm says). But it seems like it would be hard to justify that as a good alternative to adding those 16000 bytes to the machine's main memory, supplying an extra 1.6% of its address space with storage and allowing it to tackle problems that were, say, 5% larger.

(There may also have been a question of memory speed. The memory cited above that cost US$2.50 a bit was core, and maybe it had a 300 ns cycle time; a 320×200 display at 50 Hz minimally requires a 312.5 ns dot clock, and probably quite a bit faster than that because of the blanking intervals, so you might have needed two to four memory banks just to satisfy the RAMDAC's hunger for pixels. Of course they wouldn't have called it a "RAMDAC" or "dot clock" at the time.)

Re:What made the 1960s CDC6600 supercomputer fast? by RantyDave on Saturday February 15, 2020 @05:26PM (#22338463)
There still are GPU's that work by rendering the entire display list for every line. Yes, ie thousands of times a second. https://www.ftdichip.com/EVE/EVEProducts.htm
Re:What made the 1960s CDC6600 supercomputer fast? by tpmx on Monday February 17, 2020 @01:01PM (#22349317)
That's fascinating! Can you tell us more about their typical use cases?

I mean.. I did see https://www.ftdichip.com/EVE/EVEApplications.htm .. but, in reality?

Are you based out of Taiwan?