I don't think they'd bother, because none of these docks can do it. USB-C 3.1 inherently can't support a 4k@60hz display, due to bandwidth limitations. And it certainly can't run two of them.
You'd have to jump up to a Thunderbolt 3 dock for that sort of thing.
That said, there are plenty of dual USB-C connector, dual HDMI 4K@60hz port, dongles designed for Mac on Amazon. I think this is the most recent addition:
https://smile.amazon.com/gp/product/B07RH9HF4R/
”Satechi Aluminum Type-C Dual HDMI Adapter 4K 60Hz with USB-C PD Charging — Stunning dual HDMI display with a convenient USB-C PD port to keep your setup up and running - all in 4K 60Hz resolution. ENGINEERED FOR 4K DUAL DISPLAY - features dual HDMI ports to connect two monitors for stunning, extended 4K 60Hz display. Requires a direct HDMI connection, will not work with VGA, DVI or Thunderbolt displays...”
By contrast, this is one HDMI 4K@60Hz and one HDMI 4K@30Hz:
https://smile.amazon.com/Satechi-Multimedia-Adapter-Gigabit-...
Includes the two 4K HDMI ports of differing refresh rates, USB-C PD 3.0 charging, Gigabit Ethernet, micro/SD card readers, and USB 3.0 ports, and also will not work with Thunderbolt.
Finally, it could be a DP 1.4 MST hub but that is very rare (the first USB C to DP 1.4 MST I am aware of was announced at CES 2020 https://plugable.com/2020/01/07/plugables-new-docking-statio... and didn't ship yet) and figuring out support will be _very_ interesting. All Intel 14nm laptop CPUs are stuck with DisplayPort 1.2 and then researching which laptops with Radeon / nVidia GPUs run their USB C through those GPUs to provide DP 1.4 will be fun.
Let's put 4k @ 60 (and then 4k @ 30) into the bandwidth calculator: https://linustechtips.com/main/topic/729232-guide-to-display... you can see you need more than what DP 1.2 can provide so everything I said above applies.
Oh and of course if it's for a Mac, in general, you could just use two USB C plugs, I suspect that's what the 4k @ 60 + 4k @ 30 is: one plug is used in DP alt mode, the other is used in MFDP mode.
This adapter was, I believe, also announced at CES 2020.
May I ask why, or is it the details you have later in your post?
DisplayLink is not.
The confusion is deliberate, the company renamed itself to DisplayLink a few months after the standard came out.
and then
https://www.businesswire.com/news/home/20061106005769/en/New...
https://glenwing.github.io/docs/DP-1.0.pdf DisplayPort Standard Version 1 May 1, 2006
As others have noted, the Thunderbolt/USB landscape is pretty confusing.
Thunderbolt docks with Titan Ridge controllers fall back to USB capabilities/bandwidth if connected to a USB-C non-Thunderbolt host.
https://www.bigmessowires.com/2019/05/19/explaining-4k-60hz-... has the specific technical details.
And that’s why I’m linking to adapters that use two of the Macbook Pro ports.
Apple‘s newer model multiport adapter does 4k60 and USB 3 on devices supporting DisplayPort 1.3 (which is required to fit 4k60 into two instead of four lanes).
HDMI alternate mode hasn't really caught on, especially since it uses all high-speed lanes on USB-C. This leaves no room for USB 3 ports on a combined hub.
https://www.amazon.com/UPTab-10Gbps-60hz-Power-Delivery/dp/B... is an example
Apple also recently quietly updated their multiport adapter to do just that:
https://support.apple.com/en-us/HT207806
Intel (GPU) Macs are notably not supported, unfortunately (due to supporting DisplayPort 1.2 only).
there is no standard by that name and Rev 2.0 does not mention video
For a few years I didn't buy new hardware and recently I started seen "HDMI cables with / without ETHERNET" I thought it was some crappy marketing, wrong Chinese translation of just a "scam" like the HDMI to water tap adapter, but after looking on the internet I discovered it was real.
I think part of it is that vendors all through the supply chain have learned that churn caused by obfuscation is good for their bottom line.
If consumers could clearly understand what they needed and were able to select the right product for themselves, you would end up with a small number vendors selling solid, good quality gear. That would be bad for the chip vendors and resellers.
Monitor makers need to get their act together as well... do we really need VGA, DVI, HDMI, mini-HDMI, DP, mini-DP, thunderbolt, and USB-C all existing at the same time as ways to connect your monitor to a computer?
Businesses are buying laptops more often than desktops for the past 10 years and different manufacturers have been utilizing different approaches to minimize the number of cables needed per accessory.
The case of HDMI with ethernet net is the same. This way you can share your screen and internet connection from a mobile device with a single cable. It's only needed in specific circumstances, but as USB has become more advanced, more cables/ports are quietly just turning into differently shaped USB cables that limit which data channels are available.
Also filter whether it’s one USB-C connects to computer or two USB-C connects to computer. With two USB-C connected to computer, can pass through more types of USB to accessories.
Finally, it doesn’t show matches that I know are matches.
// I buy these to test, but don’t want to waste time testing duds, so spend time trying to figure out if/when the claimed stats are possible.
101 Intro: https://www.howtogeek.com/211843/usb-type-c-explained-what-i...
301 Deep dive: https://www.bigmessowires.com/2019/05/19/explaining-4k-60hz-...