This is still less of an issue as the electric motor can spin faster due to the reduced resistance. Higher speeds will create higher resistances from within the motor itself (which will in turn be increase the heat generated in the motor).
That heat will also be harder to dissipate in lower pressures, but I suppose alternative cooling could be added as well.
The batteries may produce as much heat as the motor, and they have a more limited temperature range. Their service life decreases when run above 40 C. Tesla batteries are liquid-cooled.
Yes, but air-density-altitute problems are identical no matter what is spinning the prop, righ?
> This is still less of an issue as the electric motor can spin faster due to the reduced resistance. Higher speeds will create higher resistances from within the motor itself (which will in turn be increase the heat generated in the motor).
OK, so do the math for me here, I am a bit confused. I am not a motor whiz, but torque at the output converted to watts is going to be power at the input less i^2*r losses. The back-EMF will go up as the motor speeds up, so it may be at a somewhat less efficient point on the RPM-versus-torque curve, but the resistance of the actual wires doesn't change.
> That heat will also be harder to dissipate in lower pressures, but I suppose alternative cooling could be added as well.
I think that is all true. Seems to me you design cooling around the cooling capacity of the air flow at max operating altitude. Is that really a huge design constraint?
Does the RPM of the electric engine matter if the RPM of the propeller can't exceed a certain rate (because the tips of the prop will break the speed of sound, which you generally don't want for comfort reasons)? I mean this in terms of power generation and pushing air.
Beyond a certain RPM range electric motors lose torque. Eventually you'd reach the limits of the bearings or the maximum centrifugal force that the rotor can withstand, but that's usually at a higher RPM than gas engines are made to survive. I would expect an electric motor designed for an aircraft would be optimized for maximum power/efficiency at whatever RPM band is optimal for the propeller, and the battery would be optimized for whatever voltage is optimal for the motor at that RPM range.
Using large radiators on an electric engine kinda defeats the purpose especially when they can’t be effectively be built into the body of the engine.
source: https://www.aopa.org/news-and-media/all-news/2019/may/flight...
Plus you'll probably want to recover some of that waste heat to heat the cabin.
But discouragingly, just last August, in Norway, a Pipistrel Alpha Electro lost power shortly after takeoff and crashed. https://aviation-safety.net/wikibase/228207
Hopefully, these folks in Fresno, CA will get their electric aircraft flight school up and running sometime soon. But summertime in California's central valley is challenging: https://sustainableaviationproject.com/2018/10/28/we-hit-the...
Not to mention it makes a lot less weight to lift; the difference is huge.