News for hackers. Stuff that matters.
Re:Show HN: USB PD Stand-Alone Sink Controller by dijit on Wednesday October 16, 2019 @05:13AM (#21268466)
This is incredible, something like this becoming mass market would remove the issues we have of older laptops not having easily replaceable power bricks.
Re:Show HN: USB PD Stand-Alone Sink Controller by chx on Wednesday October 16, 2019 @07:19AM (#21269151)
Re:Show HN: USB PD Stand-Alone Sink Controller by mschuster91 on Wednesday October 16, 2019 @05:57AM (#21268692)
This design does lack a configurable dc/dc voltage regulator, I've seen laptops with anything between 12-24V... any idea for a circuit?
Re:Show HN: USB PD Stand-Alone Sink Controller by userbinator on Wednesday October 16, 2019 @08:01AM (#21269431)
Due to component tolerances, laptops aren't that picky about what voltage they need; capacitors with 16V and 25V max ratings have basically created two ranges, 9-12V and the far more common 18-20V:

https://news.ycombinator.com/item?id=12618406

I find the other comment about a programmable output voltage in 50mV increments a little amusing, since 50mV of 5V is 1% and of 20V is 0.25%. To maintain the former level of regulation over changing loads would already require a very expensive and powerful supply with remote sense, while the latter is basically voltage reference territory.

Re:Show HN: USB PD Stand-Alone Sink Controller by oxplot on Wednesday October 16, 2019 @06:02PM (#21276420)
> I find the other comment about a programmable output voltage in 50mV increments a little amusing

To clarify, when you program the chip, you set a voltage with 50mV resolution and a lower and upper percentage bounds that you'll accept. The minimum percentage is 5%. So for instance, at 5V, you can't narrow down the range to less than 0.5V (4.75-5.25v).

Re:Show HN: USB PD Stand-Alone Sink Controller by sokoloff on Wednesday October 16, 2019 @08:15AM (#21269526)
Voltage refs are more typically 2 orders of magnitude better than that.
Re:Show HN: USB PD Stand-Alone Sink Controller by userbinator on Wednesday October 16, 2019 @08:26AM (#21269606)
Better references, yes, but 0.25% is typical of a cheap reference like a '431.
Re:Show HN: USB PD Stand-Alone Sink Controller by sokoloff on Wednesday October 16, 2019 @05:20PM (#21275884)
I stand corrected; thank you. I am genuinely surprised to learn that those are called voltage references, but that is an accepted industry term.
Re:Show HN: USB PD Stand-Alone Sink Controller by sorenjan on Wednesday October 16, 2019 @07:36AM (#21269250)
The STUSB4500 supports output voltages of 5V to 20V in 50mV increments and is programmed over I2C, so it should be pretty easy to add a small micro controller and some input interface to make the output voltage configurable.
Re:Show HN: USB PD Stand-Alone Sink Controller by botto on Wednesday October 16, 2019 @06:46AM (#21268962)
you could hang one off the output, not the most elegant but at least modular then