As other comments point out, medicine is a very specialized field nowadays and I didn't specialize in any field (I got into coding healthcare software instead) - in Germany you study all disciplines at University (min. 6 years) and then specialize during something comparable to US residency in a hospital.
I understand the process of accommodation. This poses the risk of e.g. over-correcting short-sightedness if you're not aware of it because, with each lens of increasing strength, you accommodate and think "geez, everything just got sharper.. again!". I was aware of this and, as you can find in my article, actually ended up using very similar values for dioptries (the spheres) as the opticians. So either all of us totally forgot about accommodation or all of us were aware of it :)
My values mainly differed regarding to astigmatism, and accommodation doesn't play a significant role there.
I am also aware of the bone behind my ears, thanks for reminding me :)
While you do learn a lot of stuff in med school, learning how to bend those things of glasses which go behind your ears is not part of that. I suppose that's not a skill which can be taught well, anyway - it's more like craftsmanship, getting it right by having done it lots of times.
Good job and interesting story!
As a side note: for optical reasons, the spherical equivalent of the lens (which will determine if you are overcorrecting or not) is calculated by adding the sphere value + half the cylinder value (whatever the axis value).
You ended with a correct prescription as far as I can tell by looking at the different measurements , however you did not totally grasped the optical subtleties of the accomodation process : astigmatism is important (a small overcorrection is not a big deal anyway)
It is usual to undercorrect the cylinder values given by the autoref and your ophthalmologist would have given you the right prescription I think.
I'm just saying that to underline that as I doctor myself, I'm usually very wary at thinking that I can fully understand, in a few days, what my colleagues do. I'm totally into the hacking spirit but let's stay careful, especially for more dangerous things than glasses.
Also cyl/sphere differential is also hard to determine but often follows a pattern in that you can overcompensate in sphere for cyl and vice versa.
Not even going to begin to go into the effects of possible tolerance differential, prism imbalance, and that is just with Single Vision Lenses.
Also you generally have 90 days as industry standard to go back and retest your RX.
In German, "ophthalmologist" is "Augenarzt", which is literally "eye doctor" (Auge: "eye" + Ärztin: "doctor").
Well, that's settled, then. ;)
> I understand the process of accommodation. This poses the risk of e.g. over-correcting short-sightedness if you're not aware of it because, with each lens of increasing strength, you accommodate and think "geez, everything just got sharper.. again!". I was aware of this and, as you can find in my article, actually ended up using very similar values for dioptries (the spheres) as the opticians. So either all of us totally forgot about accommodation or all of us were aware of it :)
Well, minus does like more minus. (Ask your new optician friends).
> My values mainly differed regarding to astigmatism, and accommodation doesn't play a significant role there.
No, but squinting, even a small amount, does. If your axis favors it.
> I am also aware of the bone behind my ears, thanks for reminding me :)
You're welcome.
> While you do learn a lot of stuff in med school, learning how to bend those things of glasses which go behind your ears is not part of that. I suppose that's not a skill which can be taught well, anyway - it's more like craftsmanship, getting it right by having done it lots of times.
Indeed. That's why there are professionals who do it. If you are still going to do it at home and you have a plastic frame, heat the ends up slightly. You can microwave a damp rag and wrap it around the ends for a moment. Or use a hair dryer carefully. At the optician's office, they have a hot air blower that does it. Used to be they had glass beads, but those got in between lenses and caused no end to trouble. If you bend cold tips, they can more easily break.
I apologize for questioning your credentials. I guess I was a bit harsh. I just feel the article came off mostly of a slight arrogance with only a smattering of humility. You seemed to think that you could make up for years of working in the industry with only a few days of playing around. That being said, congratulations on being mostly successful. However, I am sure I don't have to tell you that an eye exam is only partially to refract you. There are other health issues that can be detected by having a routine eye exam.
Doctors are pretty specialized today, and he has a list of publications on his site, right in front of you, so that may be an excessive reaction.
I think that's a little harsh. I took it to mean he realized he had no idea how to properly bend it, and pointed out an optician is the expert here.
You are right. It can be an issue in the other direction though.
People are checked after often sizeable waits looking at the same thing (their phone, the wall, outside) for a long time.
When you then start the switching lens tests, there will be a set of lens optimal for your current situation, and a different set of lens that would fit better for a long day of doing whatever you are usually doing with the glasses on.
Knowing how good a pair matches after accommodation is equally valuable, IMO.
Please consult with a medical professional.
I don't have a long experience with glasses but I have never received these instructions and my experience is similar to the author.
>Luckily, I didn’t have to.
There's a specific reason why they do this and ask you to make a decision in an instant. It's called accommodation. Your eyes will quickly try and accommodate and find focus if they're allowed to stare too long. This could explain the reason he got such different results from the exams. He was trying too hard. Just follow directions.
Edit:
> One more thing. Do you remember the process in which an optician makes you wear a new pair of glasses and stares at you with this optician-look, takes the pair of glasses away from you again, goes to the back office and starts bending parts of it in a seemingly random manner, comes back, hands you the pair of glasses which now suddenly fit perfectly?
> Yeah, I attempted to do that with my new pair of glasses and noticed that I suck at it. I would bend it to look similar like the glasses from the optician only to realize that the back of my ears were hurting after a few hours of wear.
Is he really a Doctor??? He doesn't know there's a Mastoid bone there that the "bending" (aka: Adjusting) the optician is doing is to AVOID putting pressure on that bone!?