Re:Direct to PCB InkJet Resist Printing (2006)
by jhart99 on Monday June 10, 2019 @07:53PM
(#20151997)
Out of curiosity, what cnc machine are you using?
Re:Direct to PCB InkJet Resist Printing (2006)
by opencl on Monday June 10, 2019 @08:32PM
(#20152170)
I have the Linksprite engraving machine[1], there are a bunch of companies selling the same design if you search for "CNC 1610" on any of the major e-tailer sites. It's called 1610 because the build area is 16x10cm, there are larger versions called 2418 and 3018.
At the price point it's obviously the bargain basement model of the CNC world and the quality is not great. But it works fine for PCBs as long as you don't need super narrow traces, the backlash is surprisingly not terrible thanks to the preloaded nuts.
[1] http://store.linksprite.com/diy-cnc-3-axis-engraver-machine-...
Re:Direct to PCB InkJet Resist Printing (2006)
by mlevental on Tuesday June 11, 2019 @05:44AM
(#20154017)
how do you use a CNC to mill traces?
Re:Direct to PCB InkJet Resist Printing (2006)
by opencl on Tuesday June 11, 2019 @08:12AM
(#20154699)
I use FlatCAM to generate gcode from the PCB gerber files. Then just load up a copper clad board on the machine and let it cut away the copper until only your traces are left.
Not OP, but I've had luck making PCBs on my Taig mill. Might want to choose something with ballscrews or at least preloaded nuts or potentially a belt drive. PCBs hate backlash, but don't constitute a high load.
Re:Direct to PCB InkJet Resist Printing (2006)
by kennywinker on Tuesday June 11, 2019 @04:30AM
(#20153770)
Isn’t f4 fibre glass particulate not something you’d want in your home? That’s one of the things keeping me away from cnc milling...
Re:Direct to PCB InkJet Resist Printing (2006)
by opencl on Tuesday June 11, 2019 @08:30AM
(#20154788)
Yes, safety is always important. That's why I put the machine in my garage where there's a dust collection system.
Breathing in fine dust in general is not very good for you so dust collection and/or wearing a respirator is generally a good idea when doing any major wood/plastic/fiberglass cutting.
PCB houses are amazingly cheap and fast compared to just a few years ago but if you don't need multiple layers nothing beats having it done in a few minutes for ~$0.10 per square inch for prototyping.