The very narrow spectrum benefits astronomers because it's easy to filter out light pollution from low-pressure sodium lamps.
For example, while sure, OSRAM advertises/sells street lighting LEDs that are broad spectrum (131 lm/W) [1] they also sell single-color LEDs like these amber ones that are actually even more efficient (141 lm/W) with an emission range almost entirely within 600-640nm [2].
This is almost as tight a range as LPS (which looks like about 580-610nm) [3], and it beats out HPS considerably [4].
[1] https://www.mouser.com/new/osram/osram-street-lighting-solut...
[2] https://www.osram.com/os/ecat/OSLON%C2%AE%20SSL%20150%20GA%2...
[3] http://www.flagstaffdarkskies.org/low-pressure-sodium-lighti...
[4] https://en.wikipedia.org/wiki/Sodium-vapor_lamp#/media/File:...
Relevant Technology Connections video: https://www.youtube.com/watch?v=wIC-iGDTU40
Street lamps should include as little short wavelength light as possible and should otherwise be as even (this means: use more lamps spaced closer and placed at lower height, diffused and shielded from the side) and dim as possible, so as to avoid causing distracting glare in people’s peripheral vision, and avoid causing high contrast between areas directly under the lamps and areas in shadow. Human vision is amazingly good at adapting to very low light levels. After adaptation, humans can navigate the environment by e.g. starlight, but at any rate can see just fine under sodium lamps.
But the way cities roll out LED street lighting is to put a small number of widely spaced very intense blue lamps high up in the air, not diffused and with little shielding from the side.
Every parameter has been optimized (pessimized?) for blasting away people’s night vision and causing enough glare to make seeing into the shadows all but impossible.
Extremely low color temperature LEDs would be fine, but don’t really have any especially great advantage over sodium lamps. (Except maybe for getting some government subsidy money?)
I assume animals have evolved to deal with that.
This sounds like dangerous advice. Sodium reacts exothermically with water producing NaOH. In practice this means it will violently boil and splatter strongly alkaline lye around. (Source: this is how my high school chem prof lost some of his eyesight.)
That doesn't sound right, source?
edit: https://www.stouchlighting.com/blog/led-vs-hps-lps-high-and-...
Why would LEDs put Sodium vapor lights out of business? Sodium lamps have the worst color rendering of any bulb. They produce a dark yellow glow which is generally a very low quality light. Additionally, there are serious waste disposal issues with sodium lamps. In particular, they have been known to start fires in the event that the lamp is broken and the sodium metal is exposed. The sodium can catch fire even in the event that the lamp is broken on the ground. For this reason it is safest to break sodium lights under water and then to subsequently dispose of the destroyed bulb. Lastly, HPS and LPS lights are monochromatic, so they can mess with your color vision if you look at them for an extended period of time.
Perhaps more importantly, in the last few years LED efficiency has surpassed that of even LPS and HPS lights and its efficiency improvements are progressing at a much more rapid rate. The largest selling point of LPS and HPS lights is the cheap selling price, the high energy efficiency (low operating costs), and the relatively long lifespan. LPS and HPS still retain these advantages over most conventional bulbs but they lose on all three counts to LEDs. In some areas (e.g. lifespan) they are drastically inferior to LEDs. The extremely low maintenance and replacement costs with LEDs is actually a major cost benefit over the long term. LED lifespan can be greater than 100,000 hours (more than four times that of LPS or HPS). Having to purchase one bulb versus 3 or 4 bulbs over the course of time is a significant selling point for LEDs. The bottom line is that having lost their traditional advantage of being the most energy efficient bulb on the market, there’s very little reason to use a sodium vapor light when LED lighting is available.