News for hackers. Stuff that matters.
Re:Build an Air Quality Monitor with InfluxDB, Grafana and D... by Animats on Thursday March 28, 2019 @03:47AM (#19510162)
What's impressive is that you can get a sensor for temperature, air pressure, "air quality", and humidity for $12.80 in quantity 1. "Air quality" is strange. It measures volatile organic components, not CO, CO2, or particulates. Sensors for those cost much more. So this is measuring what's easy to measure, not what's useful for, say, HVAC control.

8GB and Docker, plus a "cloud" server, seems a bit much.

Re:Build an Air Quality Monitor with InfluxDB, Grafana and D... by TeMPOraL on Thursday March 28, 2019 @07:38AM (#19511161)
How accurate are these, anyway?

I run a Luftdaten module myself (with SDS011 particulate sensor), but with no government meteorological station next to me, I don't really have a reference point. All I can say is that this SDS011 spews out some numbers, and when testing indoors those numbers got higher when I turned on my air humidifier. I have a similar concern about DHT11/DHT22 - it's a random small box I got mail-ordered from China, which purports to tell the temperature and humidity of air. But again, those are two arbitrary numbers I don't have anything to calibrate again.

Just using these sensors and trusting the results is an accepted practice in DIY electronics community. But I keep wondering - are those sensors actually calibrated, or it's that people don't really care if they get garbage results?

(Related, it's also my number one complaint against a particular air quality startup in my country. They rent out air sensors which you can't inspect (there are contractual penalties involved), and they happily market their map as a vital tool for air quality, but nobody really knows what sensors they're using, and they don't even bother to put error bars on the values they show. I mean, I thought including measurement error is how adults behave.)

Re:Build an Air Quality Monitor with InfluxDB, Grafana and D... by tpxl on Friday March 29, 2019 @06:40AM (#19520456)
If you establish a baseline you can still figure out when things get worse from the baseline (for some definition of worse)
Re:Build an Air Quality Monitor with InfluxDB, Grafana and D... by TheSpiceIsLife on Thursday March 28, 2019 @04:15AM (#19510287)
Assuming I have no idea about these things, which is true—I don’t—how much is a decent CO2 sensor that can be connected to a Pi or similar setup?

I recently upgraded to double glazed windows in half the house, including all the bedrooms, and put a heat pump in each of the two used bedrooms. So I want to keep the windows closed for heat retention, but also want to keep them slightly open to reduce CO2 build up.

I sleep in my small bedroom with my two 16kg dogs, so it seems reason the CO2 level may rise to suboptimal during the night if the window is shut.

What I would like to do is make a DIY ventilation system that can move fresh, HEPA filtered, air from outside, in to the room.

Or am I over complicating things? Could I just use a small fan, something sized to replace, say, half the volume of the room every few hours, and just leave it constantly on? Or should I put a larger fan on a timer so it runs for a few minutes every hour?

Does any of this really matter?

Edit to add: any good resources to lose myself down a rabbit hole?

Re:Build an Air Quality Monitor with InfluxDB, Grafana and D... by joshvm on Thursday March 28, 2019 @05:32AM (#19510598)
A good CO2 sensor that uses infrared absorption to measure concentration costs about $100.

https://www.co2meter.com/collections/co2-sensors

Re:Build an Air Quality Monitor with InfluxDB, Grafana and D... by TheSpiceIsLife on Thursday March 28, 2019 @06:15AM (#19510791)
Thank you
Re:Build an Air Quality Monitor with InfluxDB, Grafana and D... by Nanite on Thursday March 28, 2019 @06:27AM (#19510849)
Search for : NDIR CO2 sensor module. The ones without auto-calibration go for under $20 in China.
Re:Build an Air Quality Monitor with InfluxDB, Grafana and D... by gsich on Thursday March 28, 2019 @08:41AM (#19511579)
CO2 sensors are available for about 20€. MH-Z19 or MH-Z14 are common ones.
Re:Build an Air Quality Monitor with InfluxDB, Grafana and D... by arcturus17 on Thursday March 28, 2019 @04:07AM (#19510252)
Can anyone recommend a better sensor? I’d like to build an upgraded version of this - that way I’ll also learn more.