Then why am I constantly replacing them? Wait, I know why; because I buy the cheaper ones, which have inadequate thermal solutions and God knows what quality of LED.
You may say "well don't buy the cheap ones", but people will, and they'll always be available. Even more affluent people who hook their lights up to their network will still often chose the cheaper version. Even the high end versions will fail, and you end up with the same problem.
"LED bulbs have very long lives" is an overly optimistic generalisation, in my experience.
All those bulbs I have are the namebrand that do reliably work for years, but I would not want to use them for years. I feel like I might just buy the cheapest bulbs the next time, and not care if they die after 6 months. 6 months might be the maximum amount of time they can give you their brightest.
(For reference, according to http://www.lighting.philips.com/main/support/support/faqs/li..., "The normal convention is to measure the life from when the output has reduced by 30%, i.e. when there is 70% light output remaining.")
But even if you follow parent comment's suggestion of putting the smarts in the switch rather than the bulb you'll still have failure prone control circuitry and drivers in the bulbs. Switching to 12V might help.
Colour drift has been particularly bad with any daylight or cold white bulbs. We've gone through fewer of those so may have just been unlucky brand choices.
Regular incandescents have negative lifespans?
I have several in my house. It’s a bit more complicated though.
You need an RGB driver. In my house it connects to a KNX network, but’s quick google tells me there are wifi ones as well.
LED bulbs have very long lives.
If you want to use an RGB bulb or one of those bulbs that has adjustable white temperature, a smart socket isn't going to support that.