News for hackers. Stuff that matters.
Re:I’ve used Dvorak for 10 years, and it’s not all that by userbinator on Sunday February 17, 2019 @04:28PM (#19187032)
I have observed many others who complained about their hands hurting after typing for a short time, and the one thing that stands out is they all seem to have an unusually "tense" posture and almost "attack" the keyboard whenever they type, striking the keys much harder than they need to and making excessively abrupt movements. They also wonder why they can't type very fast and tire quickly, while others like me can type all day at 130WPM on a standard QWERTY board without getting tired.

What I've found to be most important is to relax. Press the keys smoothly and deliberately, without tensing your fingers and trying to maintain a stiff posture. Use a softer keyboard if you can. Your comfort and speed will go up.

Re:I’ve used Dvorak for 10 years, and it’s not all that by oarsinsync on Monday February 18, 2019 @06:41AM (#19190034)
> Use a softer keyboard if you can

This. I dislike mechanical keyboards largely for this reason. Apple's "modern" laptop keyboards (pre-butterfly) are the best I've ever used. For me, they have the right amount of pressure required and key travel to be able to type very fast (>100wpm) at very low effort.

Re:I’ve used Dvorak for 10 years, and it’s not all that by whywhywhywhy on Monday February 18, 2019 @08:51AM (#19190569)
> butterfly

Using this worries me so much that I'm just planting a ticking time bomb of RSI. I a slight ache every time I use it because you have to hit the keys so hard to ensure they register and the stop is so abrupt as paper thin plastic smacks against the metal.

Previous gen feels so gentle compared to it, and this is coming from someone who likes tactile mech keyboards.

Re:I’ve used Dvorak for 10 years, and it’s not all that by userbinator on Monday February 18, 2019 @01:49PM (#19193112)
because you have to hit the keys so hard to ensure they register and the stop is so abrupt as paper thin plastic smacks against the metal

I've heard others similarly complaining that the key travel being too low is like the feeling of running barefoot on a hard surface, and I agree --- on a good keyboard the actuation travel has to be very low to not tire the fingers, and a small tactile bump there is not bad, but the total travel should be relatively long and "bouncy" at the end to cushion the momentum of the fingers.

All rubber-dome keyboards are not alike either; some are stiffer than others, and some have higher actuation travel --- contrary to common advice, you don't have to "bottom out" a rubber dome switch if the inner membrane-actuating protrusion is long and "squishy" enough. Once it touches the membrane the switch actuates, but there's still a cushioning end-stop effect as the protrusion continues to deform.

Re:I’ve used Dvorak for 10 years, and it’s not all that by busterarm on Monday February 18, 2019 @06:49AM (#19190064)
Ever tried topre?
Re:I’ve used Dvorak for 10 years, and it’s not all that by maskros on Monday February 18, 2019 @07:24AM (#19190170)
Topre are really nice, but for softer keys, Cherry MX reds are possibly even better.