News for hackers. Stuff that matters.
Re:Open-Source Controller for the IKEA Bekant Standing Desk by whalesalad on Monday January 28, 2019 @03:22PM (#19020722)
Ikea's standing desks aren't that great. They wobble a lot and then anything attached to it wobbles too.

Still looking for the perfect heavy-duty standing desk and heavy-duty VESA arm combo. I don't want anything on my desk moving unless I am moving it myself.

To put it this way: if a desk is $500 and wobbles slightly (meaning if I touch the desk or type, my coffee jiggles and waves are seen) or is $1000 and the desk does not transmit any energy from my keyboard into anything else ... I will pay the extra $500 without even batting an eye.

Re:Open-Source Controller for the IKEA Bekant Standing Desk by rubicon33 on Monday January 28, 2019 @03:25PM (#19020750)
Take a look at https://www.autonomous.ai

They offer the option to buy JUST the legs, and you can mount your own top. I went that route. Bought the legs with the strongest motor (can support 300lbs) and put a nice heavy desktop on there with a vesa mounted 34" curved monitor.

It's pretty damn sturdy. I never notice any wobble with normal use and I usually have it pretty high up.

Re:Open-Source Controller for the IKEA Bekant Standing Desk by skizm on Monday January 28, 2019 @03:35PM (#19020822)
+1 for autonomous. I bought the standard one offered on their site for $300 and I have two vesa mounted monitors and a desktop tower on my desk. Nothing wobbles. Extremely stable. Very satisfied with the setup.
Re:Open-Source Controller for the IKEA Bekant Standing Desk by nprz on Monday January 28, 2019 @03:42PM (#19020880)
I'm standing at an Ikea Bekant sit/stand desk right now and have no issues with wobbling. I also only have an laptop, external monitor, two bookshelf speakers and a small lamp on it, I can see how a monitor arm might cause wobbling. I've had it for ~3 years, moved it a few times and never had any issues with it. At the time it was far cheaper ($500) than any other sit/stand desk on the market, not sure if that has changed.
Re:Open-Source Controller for the IKEA Bekant Standing Desk by kiddico on Monday January 28, 2019 @03:59PM (#19021023)
Also going to chime in and say I've got one with monitor arm (only one monitor mind) and bookshelf speakers (also not a lot of weight). No wobble after 2 years or so.

When assembling I did feel that the actual attachment of the surface/board was a bit cheap. They used plastic positive tension pokey... things. Not sure what you call those. I suspect if you have to disassemble / reassemble it a few times they may wear out and the top may wobble independently of the base.

Re:Open-Source Controller for the IKEA Bekant Standing Desk by strig on Monday January 28, 2019 @03:30PM (#19020786)
I just picked up one of their new Idasen desks. It's a lot sturdier than their previous ones that I've seen.

I get minimal wobbling of the desk surface at full height, but my monitors do still wobble a bit. At normal desk height there's no wobble. I think most of the wobble comes from the cheaper VESA mount, if I'd gotten a more rigid one it would be better but I wanted more flexibility in arranging the monitors.

Re:Open-Source Controller for the IKEA Bekant Standing Desk by georgefrick on Monday January 28, 2019 @03:56PM (#19020999)
I held off on the standing desk for a long time. When I saw the IKea Idasen, I knew they had solved the wobble problem. The desk is awesome and more people should consider it. I also specifically broke out the part numbers and only bought the base. I put a Bamboo top on it.

My monitor does also wobble a bit with the cheap vesa mount I have (it's also a ultra-wide). I'm still researching a proper arm to mount.

Re:Open-Source Controller for the IKEA Bekant Standing Desk by smilekzs on Monday January 28, 2019 @04:09PM (#19021109)
Can confirm the sturdiness of Idasen. I used to be convinced that IKEA particle/paper-filled boards can never be as good as solid wood, but apparently the new leg/underframe combo worked wonders to prop up the whole thing, and it now serves as the base of my main EE workbench.
Re:Open-Source Controller for the IKEA Bekant Standing Desk by jstsch on Monday January 28, 2019 @04:24PM (#19021220)
The Skarsta is cheap and fine. When you go to Ikea they tend to wobble, because about a month after assembling them you need to tighten the bolts once. Done.

At home, I customized my Skarsta a bit. Bigger top (200CM wide versus 160CM, 70CM deep) in order to fit 2*27" LG5K and two monitor speakers. And a sliding shelf hanging below the frame, just deep enough to fit a master keyboard. Works fine! :)

Oh, not motorized. No problem. 30 secs of light excercise :)

Re:Open-Source Controller for the IKEA Bekant Standing Desk by whttheuuu on Monday January 28, 2019 @04:32PM (#19021270)
Have the Bekant and as others have mentioned the build quality is very good. I have 2 monitors mounted via an arm and it really doesn't wobble.
Re:Open-Source Controller for the IKEA Bekant Standing Desk by twothumbsup on Monday January 28, 2019 @03:27PM (#19020765)
We have "UpliftDesk" standing desks and they seem pretty solid. I haven't used it standing but I can't wiggle the desk up/down at all.
Re:Open-Source Controller for the IKEA Bekant Standing Desk by sscotth on Monday January 28, 2019 @03:51PM (#19020958)
I have an uplift desk frame with 4 legs and using my own desktop made from my parents old dinner table. Perfectly stable.
Re:Open-Source Controller for the IKEA Bekant Standing Desk by goondabba on Monday January 28, 2019 @04:00PM (#19021038)
I got a desk from https://www.fully.com last year and I'm pretty pleased with it. Looks like they have a monitor arm option.
Re:Open-Source Controller for the IKEA Bekant Standing Desk by jamescontrol on Monday January 28, 2019 @04:10PM (#19021119)
We are shopping for desks right now, and we went to IKEA to look at standing/adjustable desks, and all of them were way too wobbley, so I agree.
Re:Open-Source Controller for the IKEA Bekant Standing Desk by gamblor956 on Monday January 28, 2019 @04:45PM (#19021395)
I have a Multitable "modtable" with the setup you describe, though with a custom-carved ikea wood countertop for the desk surface.

Solid, stable, no wobble.