In short - perfect reflector preserves etendue, but imperfect does not.
Thanks for pointing this out; I seem to have learnt of a new phenomenon I wasn't previously aware of: https://en.wikipedia.org/wiki/Opposition_surge
At this point I almost think an experimental measurement of temperature equilibrium would be publishable from one of the old re/frac/flectors you can put your head into.
The idea is that you can "organize" or "revert" any ray bundle from a system of non-absorbing lenses and specular reflectors, but if your reflector has billions of tiny irregularities it's not viable to build such a system (it's equivalent to an ideal diffuser, in which light is isotropically reflected). The ideal diffusion process is clearly not reversible by itself: if you shine a beam onto a diffuser it spreads the light; if you expose it to the same light (with reversed directions), it again diffuses it instead of reverting to the original beam. In theory again the physical laws of electromagnetism are time reversible, but in practice the effort to revert some systems might be too demanding (you can even do better -- see Maxwell's demon); manipulation of physical apparatus and information acquisition/manipulation itself has a cost that surpasses any gains.
In practice, any reflector is imperfect, and therefore has nonzero emissivity, and therefore goes towards thermal equilibrium with its environment.
Sure, if we reshaped the moon into a giant mirror, we could use a lens light a fire using the “moon”.
Finally paper burns at ~233c but plenty of things ignite at lower temperatures. Hay’s ignition temperature is ~130c which considering the moon is 127c and you will concentrate extra reflected sunlight seems very viable.
However, the earth’s atmosphere blocks a lot of moonlight, so it’s more likely to work in a pressurized cabin at high altitude or spacecraft. Even your lenses are going to be an issue.
PS: A lunar day is almost a month long. They are casting long shadows which means they are a long way from noon. https://en.m.wikipedia.org/wiki/Apollo_11#/media/File%3AAldr...
It's a bad mirror, not a radiator.
To the extent that the moon acts as a greybody under sunlight, it is correct. And like most things, the moon will be close enough to a greybody that you could use the surface temperature as a first order approximation. It isn't necessary of course, since you can easily just directly estimate the amount of scattered / re-radiated energy from the amount of sunlight falling on it, without needing to use the temperature.
>Hence the question is now - can we concentrate moon light enough so that intensity at the concentration point is higher than thermal loss into environment (only then we will be able to raise temperature in the concentration area enough for combustion - remember that light is "hot" enough for this)?
No, because the body you're trying to heat up will act as an approximate greybody, so (neglecting conduction and convection which could further lower the temperature) its temperature has to max out at the Stefan-Boltzmann temperature represented by the total radiation.
1. As you mentioned, the moon acting as greybody absorbs part of the radiation and scatters the rest. In the second sentence you mention that the moon's temperature is enough to describe this radiation. In the third sentence you mention that you don't need moon's temperature to do that. So which is which?
Correct answer - to describe re-radiated energy we need moon's temperature, but to describe scattered we don't. We can ignore re-radiated, since it is not visible light and not hot enough. We can use scattered, since it is visible and hot enough.
2. Not sure why it is "No" if you are agreeing with me. Also not sure what you mean by temperature represented by total radiation (as you mentioned in part 1 there are two parts - re-radiated - at temperature of the moon, and scattered - at temperature of Sun).
To see that there is a problem with your argument - first note that the spectrum of black-body radiation dominates spectrum of grey-body radiation [1] (i.e. if black-body radiation is not in visible spectrum, the grey body will not be in visible as well). Then think that at 100 degrees C there would be no visible radiation. So the light that we see from moon cannot be this cold. Its coming from sun and it is hot enough (since it is in visible spectrum).
[1] https://claesjohnsonmathscience.wordpress.com/2012/04/21/gre...
When dealing with a gray-body, the equillibrium temperature of the body will be equal to the effective temperature of the incoming light, which will be equal to the effective temperature of the re-radiated + scattered light, since at equillbrium energy out equals energy in. So, assuming the moon is a graybody (and most objects tend to be roughly graybodies), we can use the surface temperature of the moon in our calculations instead of the effective temperature of the light that falls on it.
Effective temperature is about total power (per the Stefan Boltzmann law), not about the color of the light (per Wien's law).
Compare https://en.wikipedia.org/wiki/Effective_temperature with https://en.wikipedia.org/wiki/Color_temperature
No, it won't, and no you can't. The OP already pointed out that the Moon is too cold for its blackbody radiation to reach the visible. All the visible light from the Moon is reflected from the Sun. The Sun's radiation's blackbody temperature is the ultimate limit, here, not the Moon's.
To have a combustion we need two things - light of high enough temperature and light of high enough energy concentration. The two are not the same. All visible light has high enough temperature. However the concentration is the problem
Why do we need high concentration for combustion? If we don't supply enough energy to compensate for heat loss, the area will never get hot enough.
By the way - interesting corollary of this is that even with sun lights - if we have a mechanism that takes away heat fast enough (say by blowing cold air at the area) we would not be able to reach combustion with large mirror in direct sunlight.
An interesting demonstration of this idea is putting a paper cup full of water into a fire. It won't burn where the water is touching it and eventually the water will start to boil.
What do you think of the argument at this link, regarding maximum concentration achievable through optics?
https://en.wikipedia.org/wiki/Etendue#Maximum_concentration
I get that that implies a maximum concentration factor of about 10,000, for a light source subtending an angle of 0.54 degrees (the moon's angular size from Earth, and also approximately the sun's.)
Dylan16807 helped to prod me in this direction. https://news.ycombinator.com/item?id=18739190
Thermodynamics arguments are always good but you really need to understand that most of them describe closed systems under equilibrium. Real world is messier and if your understanding of thermodynamics is shaky its easy to get to wrong conclusions. Black and grey body discussion is in same realm, so we will avoid it here.
Let's consider piece of wood and try to see what it takes to combust it. We need two things - oxygen and high enough temperature. We are keeping this piece of wood in air, so we have oxygen. The temperature is how fast particles that compose piece of wood are moving. The wood consists of molecules, which are in turn consist of atoms. You can imagine a molecule is a bunch of atoms connected with each other by springs (the springs are created by electromagnetic forces when atoms lend and borrow electrons). The higher the temperature - the larger oscillations of these springs. When the temperature is high enough some of these springs can break and combine with oxygen to release energy - combustion.
Suppose light strikes some piece of wood. What happens? Photons hit molecules and they can interact with an electron or proton - they exchange momentum (and energy), which means that one of the atoms in a molecule gets a bump - springs would start oscillating harder.
Note, low energy photons cannot swing springs a lot. We need photons of high energy to swing spring to high temperature (ok - this part is too oversimplified, I can extend on this if there are questions). The energy of photons depends on their waivelength - the shorter waivelength - the more energetic photons. So we need photons with energy that could break molecular bonds (springs) to be able to heat up to combustion temperature. Visible light definitely has photons of such energy.
So we start sending light down our piece of wood, it starts heating up. But it sits in air and probably fixed by some supporting stand. This piece of wood starts exchanging heat with surrounding materials. To be able to overcome this we need to send lots of photons on this piece of wood. How do we do this? We use lens to collect the photons from broader area and send it down to the wood. Note that it doesn't matter where photons came from, were they scattered or produced by sun, what temperature of scattering surface was, not even what temperature of sun was. All what is matter - can we collect enough high energy photons. So we would need to calculate what is energy flux of visible light photons at the surface earth and see if we could come up with a lens to focus these photons on piece of wood to create sufficient intensity.
We know that we can see Moon in visible light, so it does sends bunch of energetic photons to us. All these photon are coming from moon direction (so we don't care that moon scatters them in other directions as well). So the task is to find what is the energy flux of these photons at earth surface and what size of lens we would need to get sufficient intensity.
Whilst this is true, it is also a bit irrelevant. Gamma rays are higher energy than visible light but you don’t need to focus gamma radiation (should that be easily possible) to start a fire, you can do it with visible light; or infrared light (which is lower wavelength again) at a high enough qanta
Equivalently, higher energy photons are higher frequency.
If the Moon was actually a giant mirror-lens thing that was the size of the Moon, but perfectly shaped to reflect and concentrate sunlight shining on it into as small an area as possible on the Earth's surface, you'd start a fire with that very easily. Probably turn a county-sized area of the crust into lava or something actually.
On the other hand, if the Moon was a perfect reflector, but a big sphere/hemisphere pointed at the sun, then it would receive a lot of high-energy radiation, but reflect it back out in every direction all over the universe. I'm not sure of the math for that offhand, but it sounds difficult to concentrate it back to something even as concentrated as direct sunlight. I suppose it would involve considering the fraction of the total solid angle the reflecting area of the Moon would shine at. Even the entire Earth's surface would be a really tiny fraction of that area, so sounds impossible to concentrate things back to fire-starting intensity.
Assuming these scenarios are basically right, then the actual Moon is a lot closer to the second than the first. So starting a fire isn't practical with any lens system you could build on Earth. Maybe you could build some massive mega-lens thing in space near the moon that concentrated enough of it back on the Earth to be near-sunlight brightness. Or just set up a more manageable sized reflector on the Moon itself, or in space, to reflect sunlight in a more concentrated way to a small area on the Earth.
I'm sure they don't want smoke in the observatory, but you could do it in a box. Then you could fill the box with variable oxygen levels (to make up for altitude) and substitute N2 with Ar/Kr/Xe to change the heat dissipation.
Entropy argument - correct in the sense that using radiation from black body we cannot use lenses to heat another body to the temperature higher than original. Easy to understand why - the first body has a temperature, radiation has the same temperature, if we apply the radiation to another object it will not heat up more than the radiation's temperature.
Also the argument about impossibility of concentrating light into a dot is correct (although even if it were possible we still would not be able to get higher temperature - light would not be energetic enough for that). The important part is - we could concentrate light into a dot only if it consist of parallel rays - i.e. only for an object that is infinitely far away.
Moon surface temperature argument is incorrect. A body at 100 degrees Celsius does not radiate in visible spectrum, so the light we see is not produced by Moon's temperature. It is reflected Sun light. So Moon's temperature doesn't matter. Moon surface does absorbs some light, changing spectral composition from about 5.7kK (Sun's surface temperature) to about 4kK. So we should consider moon to be a part of optics not emitter.
Hence the question is now - can we concentrate moon light enough so that intensity at the concentration point is higher than thermal loss into environment (only then we will be able to raise temperature in the concentration area enough for combustion - remember that light is "hot" enough for this)? I don't have answer for that - need to do calculations. What can be a deal breaker? Remember that Moon is much closer than Sun, so rays come to us even less parallel, so the area into which we can concentrate light reflected from the Moon is even larger than the Sun's, so together with lower intensity of light from Moon we might have trouble achieving the necessary intensity for combustion. However big enough lens probably will work.
And yes - I'm a physicist by training.