News for hackers. Stuff that matters.
Re:Wooden bikes by mymythisisthis on Wednesday November 21, 2018 @08:54AM (#18502649)
If you do a road trip more than 80km, you feel the vibration. I find aluminum is worse than steel. With short, daily trips, I don't think people notice vibration.
Re:Wooden bikes by anon_cow1111 on Wednesday November 21, 2018 @10:06AM (#18503181)
I've done a road trip more than 1000k on a ~$100 aluminum frame and vibration was never even a minor concern. If you're going at very high speed or constant rough ground I can see how it'll get you, but seat design and quality of shifting/braking components were by far the biggest factors.
Re:Wooden bikes by dsego on Wednesday November 21, 2018 @09:18AM (#18502808)
My 2 cents, steel is better, I've had wrist issues with an aluminum bike that I just don't get with the steel one. It seems to dampen and absorb the high frequency vibrations.
Re:Wooden bikes by halbritt on Wednesday November 21, 2018 @10:18AM (#18503273)
Generally speaking this stiffness is the result of the tube shapes necessary to achieve similar strength and stiffness of a steel frame while weighing less.

A perfect example of this is the Cannondale CAD3. It had a massive downtube and huge (straight) seat stays as well. It was extraordinarily stiff and terribly unpleasant to ride, for most. Cannondale improved that to some degree by using S-shaped seat stays on the CAAD4 making the frame a less-efficient conductor of vibrations.

Modern aluminum bikes use hydroformed tubes with optimized shapes and shouldn't really have these problems. Unless you're talking about something with an aluminum fork. That's just a cheap bike. Aluminum forks are terrible.

Re:Wooden bikes by specialist on Wednesday November 21, 2018 @10:41AM (#18503465)
"hydroformed tubes"

https://www.youtube.com/watch?v=4WpGsJKVhZY

Thank you. I kinda always wondered how bike frames were made. This is really cool.

Re:Wooden bikes by johnvanommen on Wednesday November 21, 2018 @10:44AM (#18503485)
It's rare to see a fork that's NOT aluminum. Even "carbon forks" are typically aluminum forks covered in carbon.

Source : I've shortened a lot of forks.

Re:Wooden bikes by halbritt on Thursday November 22, 2018 @02:24AM (#18508447)
Eh... Most steerer tubes are aluminum for exactly the reason that you've shortened a lot of forks. In the field, Joe Mechanic is less likely to screw up an aluminum steerer vs. a carbon one.

As to what's rare, hell if I know. Aluminum forks are fairly common on low to mid-tier bikes and the cheap ones tend to suck.

Re:Wooden bikes by dsego on Wednesday November 21, 2018 @11:13AM (#18503687)
Yes, I'm talking about a cheap frame with an aluminum fork.
Re:Wooden bikes by toxik on Wednesday November 21, 2018 @10:08AM (#18503195)
The real solution to vibrations is a thoroughly damped bike, like this one: https://www.youtube.com/watch?v=N39uwTykTQk -- it features some next-generation thinking in its spring system.
Re:Wooden bikes by Fricken on Wednesday November 21, 2018 @10:15AM (#18503261)
I'm loyal to steel because of it's stiffness. It's almost twice a stiff as the next best material, and 20x as stiff as wood, according to the chart in the article. So I don't think wood is for me.
Re:Wooden bikes by vanderZwan on Wednesday November 21, 2018 @04:01PM (#18506062)
Is this assuming a racing bike or something?

I biked 20km back and forth to school daily for six years, and 80km road trips are not something out of the ordinary. I don't think I've ever noticed anything about vibration. But that is in the countryside of the Netherlands, with flat terrain and good roads.

The worst thing I ever had was stiff knees for a week after, from inflammations caused by biking in too high a gear for too long.

Re:Wooden bikes by mrob on Wednesday November 21, 2018 @09:10AM (#18502767)
I've done longer journeys that that on a steel frame touring bike with 1.5" tires and I didn't notice any problems with vibration. I think most people complaining about vibration are probably using excessively narrow tires.
Re:Wooden bikes by gameswithgo on Wednesday November 21, 2018 @09:07AM (#18502740)
>I find aluminum is worse than steel.

Try to do a blind test on yourself sometime, with the same tires and tire pressures.

I don't notice "vibration" at any distance unless its nasty chip seal at which point nothing will save you short of a mountain bike.

Re:Wooden bikes by MrMid on Wednesday November 21, 2018 @09:25AM (#18502850)
I don't think you want to do a blind test on a bike.
Re:Wooden bikes by mrob on Wednesday November 21, 2018 @09:33AM (#18502903)
You could wrap the tubes in cardboard tubes so you couldn't see what they were made from.
Re:Wooden bikes by mancis on Wednesday November 21, 2018 @10:32AM (#18503386)
Great bikes! Ordered a frame form Materia bikes nearly 4 years ago. The bike is still in perfect condition and I am really enjoying it. If we are talking about bike stiffness and vibration damping - the front triangle (Top-tube, Bottom-tube, seat-tube) is made from solid wood, that is why I found the ride much smoother compared to my old carbon or aluminium bikes. - the rear triangle (seat-tube, chain-stay, seat-stay) is made from laminated wood so the rear end for the bike it is really stiff and hard, what is good for performance.