News for hackers. Stuff that matters.
Re:Wooden bikes by cuban-frisbee on Wednesday November 21, 2018 @07:27AM (#18502151)
I use a bike as my primary transportation (I live in a very, very bike friendly city) and I don't think I have ever seen a wooden bike.

Vibrations from the road is not something I've ever considered since it has not been a problem in any of the bikes that I've had.

My primary considerations when considering a bike would be: * Price * Durability * Cargo support (like basket and rear hub)

Re:Wooden bikes by louisswiss on Wednesday November 21, 2018 @08:57AM (#18502666)
We have quite a few wooden (I think mainly bamboo) bikes in Switzerland. I've never used one (they're quite bulky and expensive) but they are definitely common enough for people not to take notice of them when they cycle past.
Re:Wooden bikes by mymythisisthis on Wednesday November 21, 2018 @08:54AM (#18502649)
If you do a road trip more than 80km, you feel the vibration. I find aluminum is worse than steel. With short, daily trips, I don't think people notice vibration.
Re:Wooden bikes by anon_cow1111 on Wednesday November 21, 2018 @10:06AM (#18503181)
I've done a road trip more than 1000k on a ~$100 aluminum frame and vibration was never even a minor concern. If you're going at very high speed or constant rough ground I can see how it'll get you, but seat design and quality of shifting/braking components were by far the biggest factors.
Re:Wooden bikes by dsego on Wednesday November 21, 2018 @09:18AM (#18502808)
My 2 cents, steel is better, I've had wrist issues with an aluminum bike that I just don't get with the steel one. It seems to dampen and absorb the high frequency vibrations.
Re:Wooden bikes by halbritt on Wednesday November 21, 2018 @10:18AM (#18503273)
Generally speaking this stiffness is the result of the tube shapes necessary to achieve similar strength and stiffness of a steel frame while weighing less.

A perfect example of this is the Cannondale CAD3. It had a massive downtube and huge (straight) seat stays as well. It was extraordinarily stiff and terribly unpleasant to ride, for most. Cannondale improved that to some degree by using S-shaped seat stays on the CAAD4 making the frame a less-efficient conductor of vibrations.

Modern aluminum bikes use hydroformed tubes with optimized shapes and shouldn't really have these problems. Unless you're talking about something with an aluminum fork. That's just a cheap bike. Aluminum forks are terrible.

Re:Wooden bikes by specialist on Wednesday November 21, 2018 @10:41AM (#18503465)
"hydroformed tubes"

https://www.youtube.com/watch?v=4WpGsJKVhZY

Thank you. I kinda always wondered how bike frames were made. This is really cool.

Re:Wooden bikes by johnvanommen on Wednesday November 21, 2018 @10:44AM (#18503485)
It's rare to see a fork that's NOT aluminum. Even "carbon forks" are typically aluminum forks covered in carbon.

Source : I've shortened a lot of forks.

Re:Wooden bikes by halbritt on Thursday November 22, 2018 @02:24AM (#18508447)
Eh... Most steerer tubes are aluminum for exactly the reason that you've shortened a lot of forks. In the field, Joe Mechanic is less likely to screw up an aluminum steerer vs. a carbon one.

As to what's rare, hell if I know. Aluminum forks are fairly common on low to mid-tier bikes and the cheap ones tend to suck.

Re:Wooden bikes by dsego on Wednesday November 21, 2018 @11:13AM (#18503687)
Yes, I'm talking about a cheap frame with an aluminum fork.
Re:Wooden bikes by toxik on Wednesday November 21, 2018 @10:08AM (#18503195)
The real solution to vibrations is a thoroughly damped bike, like this one: https://www.youtube.com/watch?v=N39uwTykTQk -- it features some next-generation thinking in its spring system.
Re:Wooden bikes by Fricken on Wednesday November 21, 2018 @10:15AM (#18503261)
I'm loyal to steel because of it's stiffness. It's almost twice a stiff as the next best material, and 20x as stiff as wood, according to the chart in the article. So I don't think wood is for me.
Re:Wooden bikes by vanderZwan on Wednesday November 21, 2018 @04:01PM (#18506062)
Is this assuming a racing bike or something?

I biked 20km back and forth to school daily for six years, and 80km road trips are not something out of the ordinary. I don't think I've ever noticed anything about vibration. But that is in the countryside of the Netherlands, with flat terrain and good roads.

The worst thing I ever had was stiff knees for a week after, from inflammations caused by biking in too high a gear for too long.

Re:Wooden bikes by mrob on Wednesday November 21, 2018 @09:10AM (#18502767)
I've done longer journeys that that on a steel frame touring bike with 1.5" tires and I didn't notice any problems with vibration. I think most people complaining about vibration are probably using excessively narrow tires.
Re:Wooden bikes by gameswithgo on Wednesday November 21, 2018 @09:07AM (#18502740)
>I find aluminum is worse than steel.

Try to do a blind test on yourself sometime, with the same tires and tire pressures.

I don't notice "vibration" at any distance unless its nasty chip seal at which point nothing will save you short of a mountain bike.

Re:Wooden bikes by MrMid on Wednesday November 21, 2018 @09:25AM (#18502850)
I don't think you want to do a blind test on a bike.
Re:Wooden bikes by mrob on Wednesday November 21, 2018 @09:33AM (#18502903)
You could wrap the tubes in cardboard tubes so you couldn't see what they were made from.
Re:Wooden bikes by mancis on Wednesday November 21, 2018 @10:32AM (#18503386)
Great bikes! Ordered a frame form Materia bikes nearly 4 years ago. The bike is still in perfect condition and I am really enjoying it. If we are talking about bike stiffness and vibration damping - the front triangle (Top-tube, Bottom-tube, seat-tube) is made from solid wood, that is why I found the ride much smoother compared to my old carbon or aluminium bikes. - the rear triangle (seat-tube, chain-stay, seat-stay) is made from laminated wood so the rear end for the bike it is really stiff and hard, what is good for performance.