Re:Hetzner DIY Private Networking with Tinc
by gant on Thursday October 11, 2018 @07:17AM
(#18192497)
Running Kube on their cloud servers? Well have fun with that, the "vCore" is a very inconsistent unit unless you get their dedicated core servers. I moved back to Hetzner Bare Metal because you can't have anything that will push the resource boundaries on these boxes.
Also regarding Wireguard, I really like how tinc will find a new path and allows you to route over other nodes as needed. Wireguard can't really do that out of the box, every link is 1:1. You can of course setup something on top of that, but I miss the ease with which tinc does this.
Re:Hetzner DIY Private Networking with Tinc
by chrismeller on Thursday October 11, 2018 @07:45AM
(#18192650)
I was actually surprised at the lackluster performance on the cloud products as well and recently spun up a dedicated box for a workload that actually required consistent performance. I never expected the performance to match a bare metal option of course, but coming from any of the other cloud providers I expected it to be more equivalent than it turned out to be.
Re:Hetzner DIY Private Networking with Tinc
by subway on Thursday October 11, 2018 @10:58AM
(#18194034)
along the lines of automatically re-routing, tinc also has some neat anycast-like capabilities -- you can assign the same ip to multiple nodes, and the lowest latency/shortest route node wins
Re:Hetzner DIY Private Networking with Tinc
by jmngomes on Thursday October 11, 2018 @06:42AM
(#18192329)
I was considering using autossh to create a private link between servers, because in my case it's only a handful of servers.
Can you comment on how stable a Wireguard tunnel is? Did you manage to get the link/VPN to stay up permanently with little to no maintenance?
Re:Hetzner DIY Private Networking with Tinc
by amaccuish on Thursday October 11, 2018 @07:00AM
(#18192413)
There isn't really a up/down of wireguard, once the interfaces are configured, you just start pumping packets through, it's pretty invisible.
Re:Hetzner DIY Private Networking with Tinc
by pstadler on Thursday October 11, 2018 @07:05AM
(#18192433)
Found it to be incredibly stable, plus the links are self-healing due to its design.
Re:Hetzner DIY Private Networking with Tinc
by jamescun on Thursday October 11, 2018 @05:43AM
(#18192082)
I second Wireguard, I've been using it recently instead of an overlay network in Kubernetes (configured as a kubenet). Incredibly easy to set up and very performant.
Re:Hetzner DIY Private Networking with Tinc
by amq on Thursday October 11, 2018 @06:52AM
(#18192376)
Could you describe how you did it?
Re:Hetzner DIY Private Networking with Tinc
by cbluth on Thursday October 11, 2018 @07:05AM
(#18192440)
Some information on how to do this would be awesome
Re:Hetzner DIY Private Networking with Tinc
by zaarn on Thursday October 11, 2018 @04:09AM
(#18191713)
I would use WireGuard tbh, but I use pfSense for Networking and there doesn't seem to be a userspace implementation available that runs on it (I did try some FreeBSD binary that I copied over but that didn't quite work out).
Re:Hetzner DIY Private Networking with Tinc
by moviuro on Thursday October 11, 2018 @08:04AM
(#18192765)
The -go version should work, though (if compiled correctly). https://git.zx2c4.com/wireguard-go/
Re:Hetzner DIY Private Networking with Tinc
by ibotty on Friday October 12, 2018 @03:47AM
(#18199933)
I hope https://github.com/gsliepen/tinc/issues/179 becomes a reality: tinc ui and features on top of wireguard!
Re:Hetzner DIY Private Networking with Tinc
by romantomjak on Thursday October 11, 2018 @04:42AM
(#18191844)
I did know about this, but it looks very interesting! Will defo check it out, thanks!
[1] https://www.wireguard.com/ [2] https://github.com/hobby-kube/guide#wireguard-setup
Edit: Benchmarks on Hetzner Cloud (1vCPU, 2GB)