News for hackers. Stuff that matters.
Re:Real world SSD wearout by spydum on Monday August 27, 2018 @12:41PM (#17852513)
So I'm confused. I get the wear out level not going lower than 1%, but that doesn't mean the drive failed, right?
Re:Real world SSD wearout by mjb on Monday August 27, 2018 @01:12PM (#17852762)
That's very dependent on the drive vendor, model, and even firmware version. In many cases, drives can go on working for a very long time after the SMART metrics show it has failed. Whether you want to take the "risk" depends a lot on how critical this particular device is in your infrastructure.
Re:Real world SSD wearout by tenebrisalietum on Monday August 27, 2018 @02:11PM (#17853145)
I have a 16GB SSD that used to be in a POS terminal before I bought it second hand. The SSD Wear Leveling Count attribute shows as failed. Still works.

I have chosen to use it as part of a RAID1 for an OS install on a home server. Waiting to see how long it will last.

Re:Real world SSD wearout by WrtCdEvrydy on Monday August 27, 2018 @04:18PM (#17854130)
It's kinda like the expiration date for foods, an estimate.
Re:Real world SSD wearout by craftyguy on Monday August 27, 2018 @12:51PM (#17852594)
I think technically it might still work (i.e. you could read/write to it without errors?), but the integrity of the data it is storing would be questionable.
Re:Real world SSD wearout by sebazzz on Monday August 27, 2018 @01:27PM (#17852874)
Doesn't it only mean that writes will fail?
Re:Real world SSD wearout by wmf on Monday August 27, 2018 @01:53PM (#17853014)
Some SSDs go into read-only mode when they have used up their endurance but others will let you keep writing.
Re:Real world SSD wearout by kalleboo on Monday August 27, 2018 @09:08PM (#17855861)
It should but due to crappy firmware many SSDs will just drop off the bus and become unreadable.
Re:Real world SSD wearout by solotronics on Monday August 27, 2018 @01:41PM (#17852959)
I would think it would mean that your writes may be corrupted.
Re:Real world SSD wearout by rb2k_ on Monday August 27, 2018 @11:05PM (#17856307)
In production tests I've seen the synthetic "wear out level" go down to 1% and the machine still writing Petabytes of data without any issues. That being said, I would only do that on machines that are mostly disposable :)