There was some hope for a while that this might turn out to be a way to hack sound so that you could produce a flat speaker full of those tiny ultrasonic speakers, and then use non-linear interference to produce deep, booming bass sounds, without having to have the much-larger speakers you need today for that to work correctly. Unfortunately, either nobody could crack the technique, or it's simply impossible, because the real speakers that emerged are quite tinny. Here's a commercial offering, where they're only willing to promise down to 150Hz in the text: http://ultrasonic-audio.com/acouspade-technical-specificatio... "The sound is of high-quality, with low noise and great frequency response, which includes authentic reproduction of bass notes and frequencies as low as 150 Hz." Which, if accurate, is better than the speakers I've heard, but still a long ways from "thumping bass" coming out of a square that could be hung on the wall as casually as a picture frame.
This is more than creepy. It should be made illegal along with using cameras for anything else than security.
The f'ing stupid thing is that the checkout line is already one big ad. It advertises all the things that the stores have already figured out you're likely to buy at the end of a shopping trip; candy, drinks, SD cards (dunno why but it's pretty consistent), etc. It is the most effective possible ad, since everything it is advertising is literally within arm's reach for immediate purchase. You'd think that would be enough!
Who is it harming? Is your association with the supermarket not entirely voluntary?
Of course you could also fry a car’s ECU, but um, swings and roundabouts right?
PS: It can't be patented now, cause I mentioned it on HN first :)
I'm unsure what you are trying to say. The problem with deep bass, as far as I know, is not that it only works in certain places; it is that it can't do it at all. See the frequency response chart in the page I linked, which I suspect if anything is probably overselling its bass capabilities. As I said, I don't know if it's merely that nobody has cracked the problem, if it is somehow fundamentally impossible with this technique, or I'll add a third one here, if it's possible but impractical (i.e., "requires a 100x larger piezoelectric array" or something).
If you've really never heard one, they have a very characteristic tinny sound. Usually when you have a conventional tinny speaker, the speaker has a relatively narrow range and is missing both the low and the high ranges. With the ultrasonic speakers, the bass is entirely gone, but the response up through the higher frequencies is pristine pretty much all the way up the human range. So you get voices with no bass at all, but that are extremely, extremely clear and easy to understand because all the higher harmonics are intact, if not outright emphasized. Very distinctive sound, even if you don't notice the highly directional and sharp sound immediately the acoustic signature is unmistakable.
First of all, to produce a sound that is identically loud to the human ear, the sound wave pressure amplitude has to increase tremendously as you go down in frequency. At 40 Hz, which is not very deep bass, you're talking a 40 dB SPL increase necessary over 1000 Hz.
Furthermore, as the frequency drops, the sound waves become longer, meaning that with constructive interference, the volume of space in which you have to produce significant sound pressure increases with the inverse of frequency.
Taken together, this means that at 40 Hz, this type of speaker must output 16*25 = 400 times as much sound energy as at 1000 Hz. To reach deep bass territory of 20 Hz, you're looking at a 1600 times increase in the energy required.
That would be an interesting forum for geeks / problem solvers AND would kill stupid/obvious patents as a side effect, and act as a repository of prior art!
Since such discussions might articulate at least the broad ideas (even if they don’t get to a specific implementation) this might discourage at least overly broad patents.
PS: Did I just make this idea un-patentable by anyone else? :D
https://hackaday.io/project/9085-ultrasonic-directional-spea...
Its reasonably well known tech in the maker community these days... I first saw one demoed at a Dorkbot meeting 10 years or so ago.
At 33C3 I rode an escalator when I suddenly heard "Never Gonna Give You Up" but apparently no one else did. It was over after a few seconds. At the top of escalator there was a guy pointing a directional speaker at random people.
Only reference I could find is in German, but it has a picture [1]. The story says the guy on the picture is not the inventor of the device.
EDIT: The thing is a parametric ultrasonic speaker and the design files and software are on GitHub [2].
[1] https://motherboard.vice.com/de/article/784z74/33c3--hacker-...
[2] https://github.com/niklasfauth/parametricspeaker