Seems to be a history of dubious competence for this machine and company:
Compare for instance with avionics and stuff on space flights. If crashing is not an option the rules about hardware change dramatically. It's a pity the article does not say whether the ram was ECC ram or not, that would be a hint that this is not just a way to be 'cheap'.
- spending years on certification and legal compliance of hardware to many jurisdictions
- already had an old and tried platform that is powerful enough to do the job
Before anyone cries "obsolete", be aware that e.g. your Canon digital cameras run a DOS clone (ROM-DOS) on similar CPUs. You don't really have to have quad core everywhere just because you can.
But of course it doesn't address the whole seals fiasco.
At work today (I work in construction) I managed to remove a latch & lock system from a door without damaging either part. I manipulated the door hook with the padlock on and loosened the top screws, which gave me enough room to remove the top two screws on the door frame latch, which gave me enough room to remove the two screws on the door hook. I then removed the bottom two on latch by using the new upward-slack. I forced the latch section around until the middle screw became loose, angled the latch and slowly removed the centre screw. I essentially just broke into the customer's garage with no signs of forced entry.
Had the lock been installed properly (IE no slack in the system) it wouldn't have been easy to remove it with no signs of tampering. However it wasn't installed properly. Incidentally, one of the easiest ways to solve this problem is to take a drill bit and to strip the head of the screws. This leaves only manually forcing of the lock to open it, which takes a lot of effort if you're using 3 inch screws through a proper stud.
Ouch.
Incompetence doesn't even begin to describe it. Or is this by design?