At very low speeds, a motorcycle behaves like a bicycle. Turn the handlebar right, go right.*
However, once you get up to normal vehicle speeds, it reverses and countersteering takes over. Turn the handlebar right, go left.*
It's one of the things they spend a lot of time drilling into your head if you take a motorcycle safety class, because a lot of folks get it wrong or incorrectly think that you turn by leaning. It's a UI problem that can very easily get you hurt -- but I'm not sure how you'd make it any more intuitive.
(*: Technically, countersteering is still in play at low speeds, even on a bicycle... but it's very subtle and most folks don't notice it, because you quickly correct the other way to re-balance the bike.)
Which is why most training for practical things is pretty bad. You can't shove physical skills into student's heads. Tell them once or twice, then create a drill where they get to learn it themselves.
In this case, I would have the student do low speed turns from straight. Ideally on a bicycle.
Balance bikes are bikes with no crank or peddles, or just take the peddles off a regular bike.
Should a trackpad scroll the scroll bar, or should it scroll the surface itself? Apple wants everyone to use natural scroll because that lines up with the touch UX convention—there are no scrollbars, you scroll the surfaces directly.
And furthermore even though "left hand moves, right hand looks" is intuitive for me on the PC, I cannot get used to it on consoles because I'm so used to the default configuration in Goldeneye where left hand was "move forward/back & rotate left/right" and right hand was "look up/down & strafe left/right".
What really confuses me are JRPGs which invert the camera horizontally.
Personally, I have a physical consideration: scrolling down in a document is more common than scrolling up, and to me moving the fingers down over the trackpad feel more comfortable than moving the fingers up, so I use normal scrolling instead of inverted scrolling.
Is this really true of ships with steering wheels? I know those with a fixed rudder control do work opposite the desired direction.
Only on boats with a simple rudder/tiller does it reverse.
Of course, that only works for vertical wheels.
Ship's wheels are older than steering wheels in cars. If ships weren't "turn the direction you want to go" cars probably wouldn't be either.
It's only opposite on small craft without a wheel and is just a fact of where the pivot point is compared to the user's hand and the motor/rudder.
People made fun of me because it confuses me every time.
I don't blame them, sometimes equipment is weird. For example, the contacts on an SPDT switch don't always match intuition.
This goes unnoticed on bicycles, but on a heavy motorcycle the it becomes important.
Countersteering works at low speeds too. I don't get where this misinformation comes from, even from people who actually ride 2 wheeled vehicles. Try it, ride at a low speed, don't lean your body toward any side, just give a gentle push on the handle bar on the direction you want to go. It will initiate a lean, and the only difference you will see compared to high speed is that the wheel will self adjust after the lean started, and will automatically move toward the direction of the turn, which makes it appear as if you made a "car like" turn, but that's not what happened. The wheel start turning toward the direction of your turn only after the lean from the countersteering has been initiated.
It is more correct to just say at ANY speed you have to countersteer (or in some way get the center of mass on the 'inside' of the turn relative to the wheels) and not confuse people with the low speed vs high speed bit, even though that's the way it FEELS as a rider.
> This goes unnoticed on bicycles, but on a heavy motorcycle the it becomes important.
I don't have motorcycle riding experience, but I have noticed the same thing on a bicycle at higher speeds (25 to 35 mph going downhill). On a bicycle, you have to shift yourself a little bit to initiate a turn at those speeds. I guess you have to put more effort into the weight shift on a heavier two wheeled vehicle?
No, this is not how you're supposed to turn whether you use a motorcycle or are riding at moderately higher speeds on a bicycle and this wrong habit is how people become unable to avoid obstacles in a timely manner on the road.
Turn-by-leaning doesn't exist, it's an illusion. It works because when you lean, you are pushing a bit on the handle bar. Pushing the handle bar in the direction of your turn makes it go to the opposite direction, which makes the 2 wheeled vehicle lean, and once you stop pushing on the handle bar the momentum will keep you from falling further. You don't need to lean to turn. You only need to push the handle bar. You can in fact put your weight to the side opposite of the lean of the bike ( just be careful and keep the momentum going by pedaling at a fixed rhythm ) so long as you pushed the handlebar the bike will lean toward the direction you pushed, it doesn't matter where you shift your weight.
I am utterly amazed at the general confusion in this thread coming from both motorcycle and bicycle riders. Countersteering is how you turn no matter which speed you're at on a two wheeled vehicle. The thing about low speed is that once you initiated the turn and made the vehicle lean a little the wheel will automatically self-adjust and turn into the direction you're leaning on, while at higher speeds the wheel will stay straight after you started leaning.
Try it. Go somewhere without obstacles, ride at like 5km/h on a straight line, use only one hand, do not lean your body in any way, and with your one hand, give a gentle push on the right side, and then consciously stop putting any force whatsoever on the handlebar. After your push, the bike will lean to the right because the wheel turned to the left, and once the lean has been initiated, since it's low speed, the wheel will automatically turn to the right side without your help.
If one is riding without holding the handlebar, one can make the bicycle go to the left or right depending on which way one leans, which in essence changes the center-of-gravity. The handlebar will turn in the expected direction as well.
> Pushing the handle bar in the direction of your turn makes it go to the opposite direction
This appears to be counterintuitive. When turning right, for example, I would have to push the left side of the handlebar away from myself, and, at the same time, pull the right side of the handlebar towards myself. The front wheel will then point in the intended direction of travel, and the bike will lean toward the side I'm turning.
> I am utterly amazed at the general confusion in this thread coming from both motorcycle and bicycle riders.
It's probably because most people, myself included, have not had formal training in bicycle/motorcycle handling skills. And they learn through experience (which probably leads to the problems in obstable avoidance that you describe).
Edit: s/handle/handling/
Yes, with the very low weight of a bicycle that can be done at low speed. But I maintain turn by leaning is mostly an illusion because that's not how you actually turn when you're riding on the road and not doing "look ma no hands". Just the fact that your hands are on the handle bar, and that when you lean a little you will also naturally put pressure on the side of your lean, pushing away the handlebar in the direction you're leaning on, which initiate the process of countersteering. It's what people naturally do on 2 wheeled vehicles whether they were taught to or not.
> When turning right, for example, I would have to push the left side of the handlebar away from myself, and, at the same time, pull the right side of the handlebar towards myself.
The only way this could work is that the lean was already initiated by countersteering. You just haven't realized you push the handle bar and to that instinctively. You should really, really give a conscious try later. Keep your bike as straight as possible, do not lean in any way, do nothing but a gentle push on the handlebar on the side you want to turn, and try very consciously to not put any pressure toward any direction after your gentle push. You will witness your bike leaning, then the wheel wanting to go toward the direction of your lean when you're at low speed, the bike doesn't need you to move the wheel toward the direction of the turn, it does that by itself.
Simply put there's no point at which one should consciously do anything other than pushing to initiate the lean.
> have not had formal training in bicycle/motorcycle handle skill
I can somewhat accept this for people who only very rarely ride their bicycle on a week end or holiday. But if you're going on the road mixed with other vehicles, or worse, if you ride a motorcycle, you should be fully in control of your vehicle. You should be able to make a turn as fast as mechanically possible without falling and at least be conscious that one should keep a steady speed, neither braking nor accelerating, while turning, if one doesn't want to fall and crash. This isn't too noticeable at moderate speeds on a bicycle but it's absolutely necessary to understand that you should keep your speed steady while turning at higher speeds, this is how many, many accidents involving only the rider are caused. The person who doesn't realize the turn is going to be steep before they came too close to the turn and chose to turn while instinctively braking to lower their speed.. braking while turning will make you fall. Loss of speed (unsteady throttle handling) will make you fall. Too much acceleration will make you fall.
Here's a good video showing what one can do with their motorcycle when one fully consciously controls its turning, instead of purely relying on instincts and misunderstood ideas like "shifting weight" (don't do that) :
When you put it that way, it does make more sense. That is, if you don't countersteer, then you'll end up falling because the the vehicle will lean too much. With a bicycle, though, you may not really feel that you're pushing back on the handlebar because of the difference in weight compared to a motorcycle.
> You should be able to make a turn as fast as mechanically possible without falling and at least be conscious that one should keep a steady speed, neither braking nor accelerating,
I actually already do this while riding and driving given what I've read about the concept of the "friction circle" which states that turning while accelerating or braking requires more traction compared to just turning. So for the most part, I will brake and slow down to my desired speed and then coast through the turn.
As for accelerating in a turn, it's a bit more problematic due to the possibility of the pedal hitting the road surface during the lean if it's at the 6 o'clock position. That's why I make sure I keep the pedals in the 9 and 3 o'clock positions when turning.
The more you look into this example, the more complicated and confusing it becomes.
You have a steering wheel, and turn it to the right. What direction do you turn? It's such a simple question. And if you're used to a car, or a bike, it's so easy to answer. Turn right, go right. Well except every captain with his boat will tell you they will go left.
And there are so many examples of this if you look at them. Our monitoring has a lot of graphs, but why would a rising or a falling graph be good? If it's latency, you want it low but not 0, because 0 would be weird. If it's available capacity, you want it high, but too high is right out as well, since it's a waste. In some cases, we need ports open because we kinda need to answer productive HTTP requests, in other cases, it would be rather silly to expose elasticsearch to the internet.
Intuition and intuitive meaning is such a hard thing.