If it was a coincidence it was certainly well-timed. I don't have the Thinkpad anymore, but I do still have some 2.5" PATA drives. It might be interesting to test this and make a video.
Here's a picture of the magnet in question (it holds stuff to my refrigerator now), w/ a penny for scale: http://mx02.wellbury.com/misc/20171203-Magnet_of_doom.jpg
This magnet was pulled from a Micropolis 9GB SCA-II 3.5" low-profile drive dating from roughly 1998 (I had a crap-ton of these drives and, as they died, I pulled their magnets, so I have a bunch of these). These particular magnets will stick to each other thru my 3" thick butcher block table. They are physically larger (substantially thicker) than the ones I've pulled from newer drives.
Edit:
I assume that the data and servo tracks written to the drive are done so in the presence of the magnetic flux of the magnets supporting the voice coil. I always just assumed that adding a substantial new source of magnetic flux (the magnet in my hand) either induced a current or magnetized some component in the drive.
Not really, they look very close in size to current Enterprise Drives (https://imgur.com/2HjuuKM), Of course I have removed the Metal backing plate from mine
Now consumer drives do have smaller magnets (that is one way to save cost)
Here is a photo of the 4 styles of magnets I still personally have, the smaller magnets are either out of consumer drives and 2.5in drives manufactured in the last 7 years https://imgur.com/59XjVPm
And just for fun a small assortment of my collection because why not
I've found scavenged hard drive magnets to be very useful for odd jobs. One served several years holding up the fallen head-liner over the drivers seat in one of my crappier cars.
Magnets near your or even on the computer do nothing.
Yes. The magnet is stationary and the spinning drive plate is moving the data, the conductor, very rapidly relative to the magnet. (imho the real issue is the large metal box surrounding the drive plates. It's hard to feel a magnet from inside a metal house.)
In a server, the power supply is on the other end of the chasis. In a laptop, it's a lot closer to the internals.
> I don't buy that either.
Theory: https://en.wikipedia.org/wiki/Electromagnetic_induction
The forward model: https://www.youtube.com/watch?v=UL_ryxub-RA
The reverse model: https://www.youtube.com/watch?v=J9b0J29OzAU
The big ones: https://en.wikipedia.org/wiki/List_of_conventional_hydroelec... Note: the Three Gorges: 22 GW
For comparison, nuclear power: https://www.nei.org/Knowledge-Center/Nuclear-Statistics/US-N... Largest U.S. nuclear plant: Palo Verde (Arizona) produces around 4 GW.
For home applications: http://www.ebay.com/bhp/hydro-electric
A person, moving a magnet near a single wire - not even a coil - is going to induce utterly insignificant amounts of electricity.
You'd need lab equipment to even detect it. It will do absolutely nothing whatsoever to computer electronics.
Instead, why don't you take a multimeter and see if you can measure any voltage (never mind current) by moving a magnet, by hand, near a single non-coiled wire.
Anyways, I apologise for being snappy.
- HDDs often live right next to each other (separation of roughly 1cm, front to back).
- Power supplies and their induction coils are right next to the drives in some cases, including for instance consumer grade NAS boxes.
- HDDs tend to have a coil of wire, too.
If HDD magnets overwriting nearby HDD data was a thing, it would be happening all the time.
If HDD magnets in motion in certain orientations were inducing damaging currents in nearby HDDs or in nearby power supplies which then damaged connected components, that would be happening less often but still all the time. Not all chassis designs have power supplies at the opposite end as the disks, and some applications like consumer NAS boxes have them in close proximity to each other.
Either some extremely unfortunate and rare positioning and orientation and motion of the magnet occurred, which barely exceeded the design limits of the drive or power supply or other circuitry (or maybe the laptop hdd or circuitry was shoddy and shouldn't have had a problem but did), or this is a major problem that's gone unappreciated among computer and NAS builders for decades, or it was an extremely unlikely coincidence.
kees99 posted a possible explanation, where the magnet moves the voice coil, which ends up destroying the drive by writing data in the wrong places.
Modern drives, however, are designed to "follow" the tracks that are cookie-cutter imprinted onto the platters. We use this design now as it's far easier to design a head that reads tracks and makes slight adjustments to stay on track, vs a head that needs to move to an absolute exact position.
In other words, modern drives are designed to combat this exact problem.
> (harvested from an old hard disk drive)
Okay, this is making even less sense. "Hard drive magnets", in a drive, are millimeters from the spinning platters. I refuse to believe that the same magnet, moved 6 inches away from the computer caused catastrophic damage.