News for hackers. Stuff that matters.
Re:Tesla Semi by King-Aaron on Thursday November 16, 2017 @11:46PM (#15718995)
> Because the days of a service manual and a backyard shed are over

They really aren't, as much as the manufacturers like to tell you they are.

Sure, the sheer amount of sensors/vacuum systems/electronics/etc make it look too complex for the layman, but as long as you've got an OBD scanner and a laptop, you can make quick work of most things. The biggest issue is manufacturers currently having an obsession with inverse torx head bolts in unusual and frustrating places (i.e. pull the top end off the engine using only a 10mm, 14mm and 17mm, and then juuuust at the last step, there's a sudden 6.5mm inverse torx bit needed to be fetched from Narnia.). But you can always get parts.

Electric cars will be just the same - in fact, I think they'll be easier for the home electrician to work on. Most of the modular manufacturer-specific parts can be interchanged for other components (inverters, batteries, etc). It won't look as neat and clean, but considering that electric cars are fundamentally less complex than internal combustion engines I don't think people will struggle.

Re:Tesla Semi by PhasmaFelis on Friday November 17, 2017 @12:22AM (#15719175)
Security screws on purchasable goods really need to be banned for anything that doesn't pose an immediate and extreme health and safety hazard.
Re:Tesla Semi by njarboe on Friday November 17, 2017 @01:56AM (#15719714)
And I don't think anything sold in the US today, not to the Department of Defense, has anything that poses "an immediate and extreme health and safety hazard".
Re:Tesla Semi by Mchl on Friday November 17, 2017 @03:20AM (#15720160)
Smoke detectors contain highly toxic Americum 241 isotope. It's not that hard to remove it from the ionization chamber.
Re:Tesla Semi by Reason077 on Friday November 17, 2017 @04:20AM (#15720444)
Most modern domestic smoke detectors are now photoelectric, rather than ionization based.

Not only do they not contain toxic Americum 241, photoelectric smoke detectors are also both more sensitive to real fires and less prone to false alarms.

(The later is actually really important, as people will often disable smoke detectors in response to a false alarm - and then forget about them)

Re:Tesla Semi by PhasmaFelis on Friday November 17, 2017 @05:17AM (#15720727)
We had a kitchen smoke detector in college that was kept swaddled in plastic wrap at all times because it went off every. time. we tried to cook something. Absolutely a safety hazard, yeah.
Re:Tesla Semi by saagarjha on Friday November 17, 2017 @04:14AM (#15720417)
…while it remains sealed in a layer of gold. It's not easy to get the Americium out.
Re:Tesla Semi by PhasmaFelis on Friday November 17, 2017 @05:15AM (#15720712)
I'm mostly thinking of high-voltage capacitors. Basically, if sticking a screwdriver in the wrong place could maim or kill you, I'm okay with having security screws there. Otherwise, no.
Re:Tesla Semi by j_jochem on Friday November 17, 2017 @02:31AM (#15719883)
I’d say cars to belong to that category. Oh, and guns sold to private citizens maybe?
Re:Tesla Semi by rebuilder on Friday November 17, 2017 @02:52AM (#15719993)
I don't know, an electric car seems like it would contain a few items you don't want to be poking at if you don't know what you're doing. Security screws could a pretty good job of keeping the casual DIYer from electrocuting himself, essentially a "can't open this? Maybe you shouldn't."
Re:Tesla Semi by jldugger on Friday November 17, 2017 @02:54AM (#15720007)
Microwaves have high voltage capacitors the size of your hand, which you should absolutely discharge during maintenance.
Re:Tesla Semi by 0xfeba on Friday November 17, 2017 @01:51PM (#15724838)
Airbag assemblies/controllers tend to have these.
Re:Tesla Semi by gok on Friday November 17, 2017 @05:31PM (#15726529)
Particularly in the era of self driving cars, wouldn't vehicle parts qualify for that?
Re:Tesla Semi by tty7 on Friday November 17, 2017 @12:18AM (#15719150)
Sure - I don't disagree, but in reference to

> possibly waiting on parts that are being overnighted.

I can not manufacture at home the parts I need for my 2003 petrol engine, my 1986 - I can.