And by the time you have that, there are probably way better ways to deal with traffic than this sort of crazy contraption. Even if this ever becomes practical I have a hard time seeing it ever being the best use of money.
Segmenting the bus enough to give it a safe turning radius will make it seat very few people. (And note I don't say "decent" or "cost-effective", I said safe. If cars are driving underneath, the "bus" must also turn exactly like a car.)
Nifty concept, pretty pictures, much less practical than the only-barely-practical-if-that trains that don't have to stop that got posted four or five times a few months ago. But worth noodling around with; I don't fault the designers too hard, I fault the credulous media.
I'm pretty sure Houston drivers would be. They can't even deal with light rail on city streets!
The reasons for this may be carelessness or disregard--reasons don't really matter. The behavior exists and rules/signs don't appear to mitigate very successfully (especially strange signs and irregular rules you don't see anywhere else).
Carelessness and disregard are part of the human condition and why defensive driving is great. It follows the robustness principal of "Be conservative in what you send; be liberal in what you accept."
Unfortunately, the performance envelope of Houston's passenger train precludes defensive driving on its part. It can't be a good street-citizen.
This all just supports my point. If Houston drivers are pinheads that feel like they can cut-off a train that out-masses their vehicle by a factor of ten, what are Chinese drivers going to do about these massive tunnel-things going around when they have to drive underneath those things? It's begging for a lot of accidents, I think.
When fractions of a second matter, the police are only minutes away...? Not sure what calling the police will do.
Although by the looks of this system it is to be similar to a rail system, so I'm unsure if a side-on-side collision would even be capable of derailing this and causing serious harm.
Honestly, I'd be more worried about car-on-car crashes under these. I've seen how stupid people are driving under bridges. Despite no shape-change in the lane, people tend to drift away from any walls or support pillars as though they're afraid of hitting them, and I've seen it to the point of them cutting other drivers off.
http://en.wikipedia.org/wiki/Bus_rapid_transit
Basically the car traffic will be signalled to stop, giving the bus priority.
You can cross the bus with the tram:
https://secure.wikimedia.org/wikipedia/en/wiki/Trolleybus
...with the articulated bus: https://secure.wikimedia.org/wikipedia/en/wiki/Articulated_b...
It is important to be realistic, but I also think that this type of thinking is notably absent from U.S. society. The thing that defines Chinese innovation for me is that it is based almost exclusively on urgent necessity, which is always a great environment for progressive ideas.
Is it really a good use of space?
For one thing, it means all your roads have to have some huge overhead clearance, which stops you from having overpasses et cetera.
Secondly, your road has to be made wider to put the bus there anyway, since you need space for the bus wheels. I doubt that the extra half-lanes you need for the wheels on either side of the road will be much less than one full bus lane.
Thirdly, every bus stop, which was previously just a metal post sticking out of the concrete, is now a complicated two-storey structure with stairs.
And that's before we get to the problem with turning the damn thing. You'll notice that the video depicts this bus on an insanely wide road; I have difficulty imagining it in an area where space really is at a premium, and in such a place I can't imagine it'd really take up less space than, say, a dedicated bus lane.
According to the video it's a hybrid. When there's no rails you need to paint special lanes, and the lane-assist system will keep the vehicle on track. From the operator's point of view it's driven like a train.
That's even before they've taken into account the costs of building and testing enormous custom-designed vehicles rather than using tried and tested technology.
Alternatively, they could have sacrificed slightly more road space for a conventional light rail system, or even a bus lane and all the flexibility that comes with regular buses....
EDIT: Watching the video now. The "bus" is divided into many sections which need to "snake" around turns. This fact is fudged a lot -- many of the illustrations also show vehicles that do not have joints. Judging from the size of the bending joint sections, the minimum turn radius of the bendable trains looks fairly large.