News for hackers. Stuff that matters.
Re:Dumb Things Camera Companies are Still Doing by thinkMOAR on Wednesday September 27, 2017 @04:42AM (#15345933)
At the time that was my deciding factor picking between canon rebel something vs nikon d80 (2006, when it was brand new). Photo quality-wise they were so well matched, until i read a review where the author said, the canon is plastic and the nikon metal and the metal makes you feel you have a real tool in your hands instead of toy. (also i'm not the most careful person metal stronger then plastic, typically)
Re:Dumb Things Camera Companies are Still Doing by bryanlarsen on Wednesday September 27, 2017 @05:17AM (#15346089)
Given that you're often hand holding a camera, being lighter is a significant advantage, it can often be the difference between a stable or a blurred shot.

And good plastics are plastic in the traditional sense of the word: if you drop them, they'll absorb the force by deforming and then spring back into place. Metals deform permanently. In a car that's an advantage, you can just hammer it back into place. With a precision instrument a bent tool is just as bad as a broken one.

I don't know how a Rebel compares against a Nikon in a drop test -- I've dropped my Rebel without issues, but no major drops, luckily. But I can compare the pre-unibody MacBook Pros with Thinkpads from the same era. In the store, the original MacBook Pros felt and looked a lot more solid, but they were really crappy cases. OTOH, the ThinkPad's were tanks. Their plastic cases had a magnesium frame, giving them the best of both worlds. Of course, once Apple switched to unibody and ThinkPad's have started to compromise to compete on thickness the story hasn't been so clear.

Re:Dumb Things Camera Companies are Still Doing by CrystalGamma on Wednesday September 27, 2017 @06:02AM (#15346274)
> And good plastics are plastic in the traditional sense of the word: if you drop them, they'll absorb the force by deforming and then spring back into place.

That's not what I was taught plastic meant. I was taught both plastic and elastic materials deform under force, but the elastic ones (not the plastic ones) return to their original form once the force is gone …

Re:Dumb Things Camera Companies are Still Doing by danmaz74 on Wednesday September 27, 2017 @07:10AM (#15346601)
"Plastic" actually stands for "thermoplastic", meaning they can be easily deformed when hot. At normal temperatures, a thermoplastic material can be pretty elastic.
Re:Dumb Things Camera Companies are Still Doing by jorvi on Wednesday September 27, 2017 @06:14AM (#15346315)
If you drop an iPhone hard enough it wil dent. Drop a polycarbonate phone: no problem. Windows phone wasn't a great OS, but the Lumia line were absolute tanks.
Re:Dumb Things Camera Companies are Still Doing by dom0 on Wednesday September 27, 2017 @06:36AM (#15346419)
PC is a very impact resistant material, but you can also form it cold, a bit like mild steel, actually.
Re:Dumb Things Camera Companies are Still Doing by occultist_throw on Wednesday September 27, 2017 @07:21AM (#15346657)
So is nylon. But nylon is hydroscopic, and thus not well suited for electronics applications.

I do prefer ABS-PC or ASA for a lot of my more-adverse condition cases. They're much more heat resilient, and chemical/UV resistant in ASA's case.

Re:Dumb Things Camera Companies are Still Doing by dom0 on Wednesday September 27, 2017 @10:01AM (#15347853)
Well, a great many connectors (even, or rather, especially industrial ones) are made from PA6 or 66 with some glass fiber fill; including the actual contact carriers (if they are a separate part). FR4 is somewhat hygroscopic as well; moisture expansion causes real problems for some applications. Never heard of issues with PA connectors.
Re:Dumb Things Camera Companies are Still Doing by ghaff on Wednesday September 27, 2017 @04:27PM (#15351971)
In mechanical engineering, plastic deformation does refer to permanent/non-reversible changes (as opposed to elastic deformation) past the elastic limit. That said, plasticity is more commonly used to suggest malleability.
Re:Dumb Things Camera Companies are Still Doing by jacobush on Wednesday September 27, 2017 @05:28AM (#15346130)
A heavier camera can be steadier to hold, just by sheer mass. Micro shakes in muscles can make a light camera body move more.
Re:Dumb Things Camera Companies are Still Doing by twobyfour on Wednesday September 27, 2017 @08:06AM (#15346926)
Plus a heavier body can better balance a heavy telephoto lens.
Re:Dumb Things Camera Companies are Still Doing by wiredfool on Wednesday September 27, 2017 @08:03AM (#15346901)
Elastic deformation is reversible with a release of the driving force, plastic deformation isn't.

Typical metals will have an elastic zone, where they act like springs, and a plastic zone, where they don't, and then they fracture. Brittle materials have a relatively small plastic zone, ductile materials will have a large one.

Re:Dumb Things Camera Companies are Still Doing by thinkMOAR on Wednesday September 27, 2017 @05:27AM (#15346126)
That's true an over years read many people that dropped their canon rebel and they were surprised it didn't shatter into a million pieces and often still worked as good as before. Some brought it to service centers just to be sure.

I never dropped my camera though, but i do run into things a lot, doors, doorposts, fences and most of all tiny people.

Though with a bit typical lens 70-200 or some people often bring, i doubt the difference in weight of the body plastic vs metal is really noticeable. (plastic rebel XTi 556 grams vs 668 grams metal nikon d80)

Re:Dumb Things Camera Companies are Still Doing by coldtea on Wednesday September 27, 2017 @06:24AM (#15346361)
>I never dropped my camera though, but i do run into things a lot, doors, doorposts, fences and most of all tiny people.

Huh?

Re:Dumb Things Camera Companies are Still Doing by thinkMOAR on Wednesday September 27, 2017 @07:53AM (#15346837)
I'm not the most careful person with my camera gear. All my bodies and lenses have taken some blows here and there from, as i said, doorways, people, brick wall corners etc, flew through the car once, i just never let it slid from my hands on the ground or something.

Typical i have a shoulder or wrist strap, ads (no im not affiliated) peakdesigns' or blackrapids' straps and wrist bands

If any reading this still use the neckband with their cams, checkout black rapids systems or peak designs. It's so much more comfortable then 2+ kg dangling from your neck.

Re:Dumb Things Camera Companies are Still Doing by coldtea on Wednesday September 27, 2017 @08:41AM (#15347165)
Mostly referring to the "tiny people".
Re:Dumb Things Camera Companies are Still Doing by sogen on Wednesday September 27, 2017 @08:55AM (#15347273)
Kids
Re:Dumb Things Camera Companies are Still Doing by thinkMOAR on Wednesday September 27, 2017 @09:14AM (#15347440)
Oh sorry, i meant kids indeed, they are about head height of where i carry my camera, waist height. (im 2m tall)
Re:Dumb Things Camera Companies are Still Doing by dom0 on Wednesday September 27, 2017 @06:00AM (#15346266)
> Given that you're often hand holding a camera, being lighter is a significant advantage, it can often be the difference between a stable or a blurred shot.

Lighter camera ~ more vibrations.

Re:Dumb Things Camera Companies are Still Doing by jawbone3 on Wednesday September 27, 2017 @09:57AM (#15347816)
Not when you hold it in you hands, which is the clearly stated premise.
Re:Dumb Things Camera Companies are Still Doing by dom0 on Wednesday September 27, 2017 @10:08AM (#15347910)
No. Hand-held a heavier camera gives you less shake, unless it is too heavy to hold continuously without quivering.
Re:Dumb Things Camera Companies are Still Doing by throwanem on Wednesday September 27, 2017 @05:30AM (#15346143)
I carry my camera all the time, so I'm not super upset about it being made of plastic rather than metal. The plastic of which it's made has a higher tensile strength than any casting-grade aluminum; machined aerospace aluminum would be stronger, but would also cost a lot more to make and thus to buy, and I don't mind having paid an entry-level price for my entry-level DSLR.
Re:Dumb Things Camera Companies are Still Doing by dom0 on Wednesday September 27, 2017 @06:03AM (#15346278)
DSLR camera bodies aren't cast aluminium; they're cast magnesium (which contain 10 % aluminium or so).
Re:Dumb Things Camera Companies are Still Doing by throwanem on Wednesday September 27, 2017 @06:31AM (#15346394)
Which DSLRs? All the ones I've seen and handled have been PC-GF30 or something very similar.
Re:Dumb Things Camera Companies are Still Doing by dom0 on Wednesday September 27, 2017 @10:06AM (#15347887)
The low-end ones are wound around some folded sheet steel core; but higher end DSLRs have cast cases. Gripping surfaces are rubberized.
Re:Dumb Things Camera Companies are Still Doing by saryant on Wednesday September 27, 2017 @09:48AM (#15347732)
I beat the crap out of a Canon Rebel XT for about 12 years before finally replacing it. Still worked fine, no issues, I just wanted better high ISO performance.