News for hackers. Stuff that matters.
Re:Global Foundries discloses 7nm process detail by Animats on Wednesday July 05, 2017 @03:13PM (#14705299)
Yet another fab pushing deep ultraviolet lithography as far as it will go for 7nm, rather than going to "extreme ultraviolet". "Extreme ultraviolet" is really soft X-rays. The "light source" is either a synchrotron, or an incredible kludge where droplets of tin are vaporized by lasers. They also produce totally incoherent light, while the ordinary processes use lasers producing coherent light, which focuses better.

Deep ultraviolet light source: [1] Little box.

Extreme ultraviolet light source: [2] Two floors of equipment.

Nobody really wants to go to EUV with the existing sources. The industry hopes for an EUV source that isn't insanely expensive, incoherent, dim, and an operational headache. But there's nothing better coming along in the near term. Intel and Samsung have chosen to build EUV fabs, to be ready in 2019, maybe. Everybody else is trying hard not to.

[1] http://www.oxxius.com/LUV-series-266nm-280nm-CW-laser [2] http://www.anandtech.com/show/10097/euv-lithography-makes-go...

Re:Global Foundries discloses 7nm process detail by 13of40 on Wednesday July 05, 2017 @03:22PM (#14705370)
I know nothing about this area, so this is kind of an ELI5 question, but: If the wavelength of the light defines the lower limit of detail size, why can't they switch to actual x-rays, which we already seem to be really good at producing?
Re:Global Foundries discloses 7nm process detail by sbierwagen on Wednesday July 05, 2017 @03:37PM (#14705484)
Not my field, but I'd guess that one problem is that the hotter the photon, the better it is at penetrating matter. EUV photomasks are already a real pain in the butt to make[1], and making them work for shorter wavelengths probably introduces even more excitingly intractable engineering problems.

1: https://www.nist.gov/sites/default/files/documents/pml/div68...

Re:Global Foundries discloses 7nm process detail by justinjlynn on Wednesday July 05, 2017 @07:44PM (#14707112)
Masks may be a pain, but the pellicle (the part that protects the masks from contamination) is non-existent unless they've made a breakthrough I'm unaware of:

https://www.semiwiki.com/forum/content/3720-euv-pellicles.ht...

basically this means any dust or contamination of the mask by anything bigger than 50-80 nm will possibly ruin the maskset and destroy the yield until it is replaced. It's a huge challenge.

Re:Global Foundries discloses 7nm process detail by Animats on Wednesday July 05, 2017 @03:38PM (#14705492)
If you go too far into the X-ray range, the high-energy X-ray photons penetrate the masks.
Re:Global Foundries discloses 7nm process detail by sbierwagen on Wednesday July 05, 2017 @04:07PM (#14705711)
One fun fact about EUV lithography that I learned recently: the masks and optics all work by reflection, since EUV photons aren't very "optical"-- you either have a thin film that EUV ghosts right through, or a thick film that stops it. Changing the type of atom doesn't much matter, there's not really anything akin to a pigment for energetic photons that's also thin enough to be used for nanometre lithography.

But EUV doesn't like to reflect much, either, so the mirrors are made of stacks of metal films, which absorb a lot of the light and need active cooling. So that's the reason EUV sources have to be so much brighter than LUV sources: the optics eat most of the light getting it to the wafer.

EDIT: elaborating on UV optics.

Re:Global Foundries discloses 7nm process detail by sytse on Wednesday July 05, 2017 @04:47PM (#14705953)
The optics are reflective because almost everything absorbs EUV.
Re:Global Foundries discloses 7nm process detail by sbierwagen on Wednesday July 05, 2017 @05:04PM (#14706096)
Or rather, stuff either absorbs EUV or doesn't absorb it. I edited the parent comment to elaborate.
Re:Global Foundries discloses 7nm process detail by fuzzyfizz on Wednesday July 05, 2017 @04:47PM (#14705959)
coool
Re:Global Foundries discloses 7nm process detail by vpribish on Wednesday July 05, 2017 @07:05PM (#14706868)
I think it's that we don't have materials that can focus x-rays with refraction the way we do visible wavelengths. The alternatives are tricky.
Re:Global Foundries discloses 7nm process detail by deepnotderp on Wednesday July 05, 2017 @05:05PM (#14706101)
Actually, x-ray lithography was a competing technology to EUV for a long time, but it has its own problems, not the least of which is going through the wafer itself and the fact that optics are ridiculously hard to make for it. Masks are already really hard to write and are projected to explode in price (not that they haven't already). Don't crush chip startups under mask costs ;)
Re:Global Foundries discloses 7nm process detail by aphextron on Wednesday July 05, 2017 @09:36PM (#14707572)
>why can't they switch to actual x-rays, which we already seem to be really good at producing?

The energy level is unnecessary. The lithography process does a "step-down" via electromagnetic lensing which determines the feature size. This becomes exponentially harder to do as you decrease wavelength (i.e. increase energy).

Re:Global Foundries discloses 7nm process detail by ben_w on Wednesday July 05, 2017 @03:27PM (#14705413)
IIRC, same reason you use a laser rather than a lightbulb in a laser cutter. Conventional x-ray sources don't focus anything like as well.
Re:Global Foundries discloses 7nm process detail by fuzzyfizz on Wednesday July 05, 2017 @03:25PM (#14705387)
coherency/focusing
Re:Global Foundries discloses 7nm process detail by eternalban on Wednesday July 05, 2017 @11:14PM (#14707920)
From [2]: To put it simply: in order to generate 13.5 nm EUV light in a special plasma chamber, you need a very powerful laser (because a significant amount of its power will be wasted); a generator and a catcher for tin droplets (in addition to a debris collector); as well as a special, nearly perfect, elliptical mirror. To make everything even trickier, since EUV light with 13.5 nm wavelength can be absorbed by almost any matter, EUV lithography has to be done in vacuum. This also means that traditional lenses cannot be used with EUV because they absorb 13.5 nm light; instead, specialized multilayer mirrors are used. Even such mirrors absorb about 30% of the light, which is why powerful light sources are needed. This level of absorption can lead to ablative effects on the mirrors themselves, which introduces additional engineering challenges. To learn more how EUV LPP light sources work, check out this video.

https://youtu.be/8xJEs3a-1QU

Re:Global Foundries discloses 7nm process detail by raverbashing on Wednesday July 05, 2017 @03:24PM (#14705381)
Also mW for Ultraviolet vs. around 100W for EUV
Re:Global Foundries discloses 7nm process detail by fuzzyfizz on Wednesday July 05, 2017 @03:23PM (#14705376)
loved your insight into this, thank you
Re:Global Foundries discloses 7nm process detail by rb666 on Wednesday July 05, 2017 @09:50PM (#14707624)
ASML is shipping their new EUV machines this year, I think we can expect some beautiful chips in a few years.
Re:Global Foundries discloses 7nm process detail by Animats on Thursday July 06, 2017 @01:45AM (#14708391)
ASML point of view: "Litho today, litho tomorrow." On to 5nm! On to 2nm! That's 10 silicon atoms across.

[1] http://staticwww.asml.com/doclib/investor/investor_day/asml_...

Re:Global Foundries discloses 7nm process detail by tutanchamun on Thursday July 06, 2017 @05:38AM (#14709136)
I wonder of there are actually structures as small as this in the CPUs? Even in Intels 14nm process there are many things that are 26nm and upwards.
Re:Global Foundries discloses 7nm process detail by 6nf on Thursday July 06, 2017 @02:47AM (#14708597)
2nm is only 4 silicon atoms in a crystal matrix
Re:Global Foundries discloses 7nm process detail by runeks on Thursday July 06, 2017 @12:39AM (#14708165)
Excuse my cynicism, but won't it just be an incremental improvement, like for all previous years (~2x as many transistors per square millimeter)?
Re:Global Foundries discloses 7nm process detail by candiodari on Thursday July 06, 2017 @02:17AM (#14708484)
In theory, it's squared, not linear. So you should have ~4x as many transistors.
Re:Global Foundries discloses 7nm process detail by vpribish on Wednesday July 05, 2017 @07:06PM (#14706874)
"... insanely expensive, incoherent, dim, and an operational headache". i'm near bursting with off-topic jokes.