News for hackers. Stuff that matters.
Re:Global Foundries discloses 7nm process detail by 13of40 on Wednesday July 05, 2017 @03:22PM (#14705370)
I know nothing about this area, so this is kind of an ELI5 question, but: If the wavelength of the light defines the lower limit of detail size, why can't they switch to actual x-rays, which we already seem to be really good at producing?
Re:Global Foundries discloses 7nm process detail by sbierwagen on Wednesday July 05, 2017 @03:37PM (#14705484)
Not my field, but I'd guess that one problem is that the hotter the photon, the better it is at penetrating matter. EUV photomasks are already a real pain in the butt to make[1], and making them work for shorter wavelengths probably introduces even more excitingly intractable engineering problems.

1: https://www.nist.gov/sites/default/files/documents/pml/div68...

Re:Global Foundries discloses 7nm process detail by justinjlynn on Wednesday July 05, 2017 @07:44PM (#14707112)
Masks may be a pain, but the pellicle (the part that protects the masks from contamination) is non-existent unless they've made a breakthrough I'm unaware of:

https://www.semiwiki.com/forum/content/3720-euv-pellicles.ht...

basically this means any dust or contamination of the mask by anything bigger than 50-80 nm will possibly ruin the maskset and destroy the yield until it is replaced. It's a huge challenge.

Re:Global Foundries discloses 7nm process detail by Animats on Wednesday July 05, 2017 @03:38PM (#14705492)
If you go too far into the X-ray range, the high-energy X-ray photons penetrate the masks.
Re:Global Foundries discloses 7nm process detail by sbierwagen on Wednesday July 05, 2017 @04:07PM (#14705711)
One fun fact about EUV lithography that I learned recently: the masks and optics all work by reflection, since EUV photons aren't very "optical"-- you either have a thin film that EUV ghosts right through, or a thick film that stops it. Changing the type of atom doesn't much matter, there's not really anything akin to a pigment for energetic photons that's also thin enough to be used for nanometre lithography.

But EUV doesn't like to reflect much, either, so the mirrors are made of stacks of metal films, which absorb a lot of the light and need active cooling. So that's the reason EUV sources have to be so much brighter than LUV sources: the optics eat most of the light getting it to the wafer.

EDIT: elaborating on UV optics.

Re:Global Foundries discloses 7nm process detail by sytse on Wednesday July 05, 2017 @04:47PM (#14705953)
The optics are reflective because almost everything absorbs EUV.
Re:Global Foundries discloses 7nm process detail by sbierwagen on Wednesday July 05, 2017 @05:04PM (#14706096)
Or rather, stuff either absorbs EUV or doesn't absorb it. I edited the parent comment to elaborate.
Re:Global Foundries discloses 7nm process detail by fuzzyfizz on Wednesday July 05, 2017 @04:47PM (#14705959)
coool
Re:Global Foundries discloses 7nm process detail by vpribish on Wednesday July 05, 2017 @07:05PM (#14706868)
I think it's that we don't have materials that can focus x-rays with refraction the way we do visible wavelengths. The alternatives are tricky.
Re:Global Foundries discloses 7nm process detail by deepnotderp on Wednesday July 05, 2017 @05:05PM (#14706101)
Actually, x-ray lithography was a competing technology to EUV for a long time, but it has its own problems, not the least of which is going through the wafer itself and the fact that optics are ridiculously hard to make for it. Masks are already really hard to write and are projected to explode in price (not that they haven't already). Don't crush chip startups under mask costs ;)
Re:Global Foundries discloses 7nm process detail by aphextron on Wednesday July 05, 2017 @09:36PM (#14707572)
>why can't they switch to actual x-rays, which we already seem to be really good at producing?

The energy level is unnecessary. The lithography process does a "step-down" via electromagnetic lensing which determines the feature size. This becomes exponentially harder to do as you decrease wavelength (i.e. increase energy).

Re:Global Foundries discloses 7nm process detail by ben_w on Wednesday July 05, 2017 @03:27PM (#14705413)
IIRC, same reason you use a laser rather than a lightbulb in a laser cutter. Conventional x-ray sources don't focus anything like as well.
Re:Global Foundries discloses 7nm process detail by fuzzyfizz on Wednesday July 05, 2017 @03:25PM (#14705387)
coherency/focusing