http://users.rcn.com/crfriend/museum/doco/DG/Nova/base-instr...
If you scroll down to "Arithmetic/Logic Instructions" you'll see that they did not have room for XOR nor OR, since several of the 8 opcodes that fit into the 3-bit field are what we'd normally think of as "one-operand", but have been expanded to be "two-operand" (oddly enough, there is an increment but no decrement instruction either.)
It's interesting to compare to two other well-known CPUs with a 3-bit ALU opcode field:
The Z80's (and 8008/8080/8085) ALU opcodes are: ADD/ADC/SUB/SBC/AND/XOR/OR/CP
The x86's ALU opcodes are: ADD/OR/ADC/SBB/AND/SUB/XOR/CMP
Note that the Nova uses two additional instruction bits for the carry. Thus, the Intel instruction sets use two of the 8 opcodes for add with carry and subtract with borrow/carry, but the Nova doesn't. So it should be easier for the Nova to fit in additional useful ALU instructions. (Not to mention the Nova has 16-bit instructions.)
The MIT Lisp Machine does just map microcode instruction bits onto the 74181 function pins but it has much wider microinstructions than the 32-bit Alto ones.
http://bitsavers.informatik.uni-stuttgart.de/pdf/xerox/alto/... http://bitsavers.informatik.uni-stuttgart.de/pdf/xerox/alto/... http://www.mirrorservice.org/sites/www.bitsavers.org/pdf/xer...
If you want to try this stuff out for yourself (and don't have an Alto handy), use the ContrAlto emulator: https://github.com/livingcomputermuseum/ContrAlto
See the Alto hardware manual (page 4) on bitsavers for details: http://bitsavers.informatik.uni-stuttgart.de/pdf/xerox/alto/...