News for hackers. Stuff that matters.
Re:Bitcoin mining on a vintage Xerox Alto: very slow at 1.5 ... by userbinator on Sunday July 02, 2017 @02:09PM (#14683616)
Here is a document I found on the DG Nova instruction set:

http://users.rcn.com/crfriend/museum/doco/DG/Nova/base-instr...

If you scroll down to "Arithmetic/Logic Instructions" you'll see that they did not have room for XOR nor OR, since several of the 8 opcodes that fit into the 3-bit field are what we'd normally think of as "one-operand", but have been expanded to be "two-operand" (oddly enough, there is an increment but no decrement instruction either.)

It's interesting to compare to two other well-known CPUs with a 3-bit ALU opcode field:

The Z80's (and 8008/8080/8085) ALU opcodes are: ADD/ADC/SUB/SBC/AND/XOR/OR/CP

The x86's ALU opcodes are: ADD/OR/ADC/SBB/AND/SUB/XOR/CMP

Re:Bitcoin mining on a vintage Xerox Alto: very slow at 1.5 ... by kens on Sunday July 02, 2017 @02:22PM (#14683685)
That's an interesting comparison with microprocessor ALU operations. (6502 is similar to Intel but doesn't have add/subtract without carry.)

Note that the Nova uses two additional instruction bits for the carry. Thus, the Intel instruction sets use two of the 8 opcodes for add with carry and subtract with borrow/carry, but the Nova doesn't. So it should be easier for the Nova to fit in additional useful ALU instructions. (Not to mention the Nova has 16-bit instructions.)