Why not PCIe? Aren't there already a bunch of design/validation/verification tools for it? A RISC-V CPU with just a bunch of PCIe lanes (and a couple of channels of fast DDR4) coming off of it (and maybe an IOMMU) would be a lot easier to integrate with existing hardware, rather than trying to recreate open-source equivalents of modern GPUs and network hardware.
What could be a good advert for RISC-V would be to design a SoC that used a full featured RV64 main core and simpler RV32I cores as offload engines for each IO device.
http://www.lowrisc.org/docs/memo-2014-001-tagged-memory-and-...
"Our open-source SoC (System-on-a-Chip) designs will be based on the 64-bit RISC-V instruction set architecture. Volume silicon manufacture is planned as is a low-cost development board."
Includes one of the Rpi co-founders.
Edit: Others have pointed out that it won't likely be in the same price range as the Rpi. Probably closer to the Beaglebone range.
The economies of scales that made the Pi's low price possible are totally absent for RISC-V: There isn't a SOC inventory glut like the one that got induced by the demand for smartphone components.
Or just support from NVIDIA https://riscv.org/wp-content/uploads/2017/05/Tue1345pm-NVIDI...
> NVIDIA will use RISC-V processors in many of its products > We are contributing because RISC-V and our interests align
A board perfect for proofs of concepts, some examples, and good marketing; everything else builds off of that.
Give me an open source model board with a kernel, network, graphics, peripherals, and general-purpose I/O. Give it to me cheap. Give it to me with a desktop environment.
Give me example simple real-world use cases ("build a ping response box!", "build a home video recorder!", "build an internet-enabled light switch!", "build a sound amp!", "build a robot to take over the world!", etc) and the hardware and software for a DIY-er to... do it by themselves.
Give people hardware, software, and examples (monkey see, monkey do), and you'll find more people adopting RISC-V.