News for hackers. Stuff that matters.
Re:DIY thermal vision shoots 360° panoramas by joshvm on Tuesday April 18, 2017 @04:28AM (#14137246)
An alternative is the 8x8 Grid-EYE from Panasonic, costs around £30. The Melexis equivalent is a 16x4 which costs about the same. Note you'll need to fill in a fairly lengthy export/release form to get hold of the Grid-EYE sensors. I haven't had any problems ordering them from Farnell, just tell them what your project is.

Both are fairly easy to talk to over I2C. You can make a passable wireless (low-res) thermal camera using something like a Particle Photon.

The MLX90640 isn't out until September unfortunately.

NB: Actually Farnell have the Grid-EYE for only £16, but the full range ( -20 to 100) model is backordered. You can still get the 0 to 80 version easily.

Re:DIY thermal vision shoots 360° panoramas by eb0la on Tuesday April 18, 2017 @04:48AM (#14137303)
I really like Melexis uses SO-19 packaging instead of the Panasonic Grid-eye SMD.

Here are the octopart links for both:

AMG8851 ( https://octopart.com/amg8851-panasonic-23284568 )

MLX90621 ( https://octopart.com/mlx90621esf-bad-000-sp-melexis-52364204 )

Re:DIY thermal vision shoots 360° panoramas by annnnd on Tuesday April 18, 2017 @11:14AM (#14139490)
Or Flir Lepton. A bit more pricey (~$200), but image quality (wrt. noise) and resolution (80x60) are much higher.
Re:DIY thermal vision shoots 360° panoramas by tossandturn on Tuesday April 18, 2017 @12:03PM (#14139947)
I used the Melexis MLX90260/MLX90261 back in December 2014 for some sensors research at work, and they were not very helpful and the documentation was appallingly ambiguous for important parts of the programming; plus, it offloads all the mathematics (not insignificant amounts of floating point and statistics) to your processor (not a good deal for embedded work). The output, once processed, though, was very accurate and provided for additional processing to make more use of the information than similar offerings.

The Panasonic Grid-Eye offering was much easier to use, and did not require additional processing power just to make use of the information.

Re:DIY thermal vision shoots 360° panoramas by joshvm on Wednesday April 19, 2017 @03:17AM (#14146068)
I've used their single point IR sensor before, just had a look at the documentation for the 16x4 - holy hell that's a lot of steps just to get a calibrated sensor reading! Do they provide a C library for it, or are you expected to write and test your own?
Re:DIY thermal vision shoots 360° panoramas by SauliusLukse on Tuesday April 18, 2017 @08:00AM (#14138097)
MLX90640 would be nice, but only for speed improvements. I would like to add additional lenses to improve resolution, but they are not cheap.
Re:DIY thermal vision shoots 360° panoramas by donquichotte on Tuesday April 18, 2017 @04:49AM (#14137308)
Nice project! This reminds me of a beautiful series of blog posts of a guy who built a single pixel pinhole thermal camera:

First post: http://orbides.org/photobot.php?lng=eng&mode=making1

Sample image: http://orbides.org/photobot.php?lng=eng&mode=pic

Re:DIY thermal vision shoots 360° panoramas by SauliusLukse on Tuesday April 18, 2017 @07:58AM (#14138086)
Awesome project! Have to pimp it :)
Re:DIY thermal vision shoots 360° panoramas by Kurtz79 on Tuesday April 18, 2017 @04:33AM (#14137257)
HN hug of death strikes again.

Cached version:

http://webcache.googleusercontent.com/search?q=cache:VQlpQWh...

Re:DIY thermal vision shoots 360° panoramas by mablae on Tuesday April 18, 2017 @04:37AM (#14137272)
I already contacted the site owner. He is doing what he can right now ;-)
Re:DIY thermal vision shoots 360° panoramas by SauliusLukse on Tuesday April 18, 2017 @08:01AM (#14138105)
Stress test! Seems like my web page needs some optimizations :)
Re:DIY thermal vision shoots 360° panoramas by fauria on Tuesday April 18, 2017 @04:31AM (#14137254)
I built a similar, although much less sophisticated prototype at a hackathon a few months ago: https://github.com/fauria/thermoman-360

In case someone finds it useful, I published a Seeed Studio recipe: http://www.seeed.cc/Grove-MLX90614-p-1157.html and adapted an Arduino library: https://github.com/fauria/bildr-mlx90614 for the MLX90614.

Re:DIY thermal vision shoots 360° panoramas by eb0la on Tuesday April 18, 2017 @05:04AM (#14137345)
Did Endesa / Opinno provided you with the hardware? Congrats for the prize, btw !
Re:DIY thermal vision shoots 360° panoramas by fauria on Tuesday April 18, 2017 @06:00AM (#14137524)
Thank you very much! No, I brought my own stuff, they provided the space, food, etc but no HW.
Re:DIY thermal vision shoots 360° panoramas by adolph on Tuesday April 18, 2017 @01:45PM (#14141042)
When I read IR in the post, I thought, "well that's not thermal, is it?" and the thought was incorrect. FLIR's page [1] has a more understandable to me summary than StackExchange [2]. Also interesting is how lensing works with radiation in the IR spectrum [3].

Thermal cameras cannot use regular glass lenses, as glass will reflect thermal radiation rather than allowing the radiation to pass through the lenses. Commonly used materials for thermal lenses are Germanium (Ge), Chalcogenide glass, Zinc Selenide (ZnSe) and Zinc Sulfide (ZnS).

1. http://www.flir.com/cvs/americas/en/view/?id=30052 2. https://physics.stackexchange.com/questions/6869/what-is-the... 3. https://www.axis.com/fi/en/learning/web-articles/technical-g...

Re:DIY thermal vision shoots 360° panoramas by moritzsimon on Tuesday April 18, 2017 @07:12AM (#14137841)
This guy did a hackier- and probably even cheaper - DIY camera a few month ago http://www.niklasroy.com/project/195/DIY_thermal_imaging
Re:DIY thermal vision shoots 360° panoramas by Etheryte on Tuesday April 18, 2017 @03:38AM (#14137073)
This is really cool, given how expensive thermal cams can be. The main sensor used by the author (Melexis MLX90614) costs only ~14$ at my local retailer, you can probably get it a bit cheaper if you order online.
Re:DIY thermal vision shoots 360° panoramas by dharma1 on Tuesday April 18, 2017 @04:36AM (#14137265)
Flir and Seek have pretty good usb thermal cameras that attach to your smartphone for about $250 if you want something ready made
Re:DIY thermal vision shoots 360° panoramas by userbinator on Tuesday April 18, 2017 @06:16AM (#14137572)
"Flir and Seek" sounds like the modern high-tech version of "Hide and Seek"... played using thermal cameras, of course.
Re:DIY thermal vision shoots 360° panoramas by dharma1 on Tuesday April 18, 2017 @09:26AM (#14138598)
ready or not, here I scan
Re:DIY thermal vision shoots 360° panoramas by mhb on Tuesday April 18, 2017 @08:38AM (#14138303)
Not as much DIY, but for $260, Sparkfun has a nice looking 80 x 60 FLiR thermal imager: https://www.sparkfun.com/products/13233
Re:DIY thermal vision shoots 360° panoramas by SauliusLukse on Tuesday April 18, 2017 @08:44AM (#14138333)
Good camera candidate to build FAST thermal panorama rig!
Re:DIY thermal vision shoots 360° panoramas by phaedrus on Tuesday April 18, 2017 @07:58AM (#14138085)
Holy moly! Two axis stepper motor controller for $67?! (You should check out the store connected with that site.) This reminds me I really need to finish my single-scanline CdS cell camera project...
Re:DIY thermal vision shoots 360° panoramas by IshKebab on Tuesday April 18, 2017 @09:44AM (#14138719)
Yeah it's a puny Arduino based one though. Look at the heat sinks. Don't waste your money - unless you really need the space the best ones are the ones that look like this:

http://www.leadshine.com/series.aspx?type=products&category=...

100 times better and they're not even any more expensive - $31 on aliexpress.

Re:DIY thermal vision shoots 360° panoramas by SauliusLukse on Tuesday April 18, 2017 @10:23AM (#14139016)
Well, Leadshine is mostly acceptable (but not Chinese fake!).

Please sum all components (custom PCB, Trinamic controllers, arduino, connectors, enclosure, shipping components, assembling,...) add some taxes and you will get almost the same price.

Re:DIY thermal vision shoots 360° panoramas by augustt on Tuesday April 18, 2017 @10:41AM (#14139172)
Wouldn't something like this be sufficient in many cases? https://www.pololu.com/product/1182
Re:DIY thermal vision shoots 360° panoramas by cr0sh on Tuesday April 18, 2017 @12:38PM (#14140298)
It would depend on the amperage of the steppers involved, but sure - though I'm partial to the DRV8825 - it's considered a better driver in the 3d printer realm.
Re:DIY thermal vision shoots 360° panoramas by IshKebab on Tuesday April 18, 2017 @02:05PM (#14141256)
Only for the tiniest of steppers. So basically no.

In my experience you can judge a stepper driver by the size of its heat sink.

Re:DIY thermal vision shoots 360° panoramas by amelius on Tuesday April 18, 2017 @05:21AM (#14137396)
I always wonder: how do you find the parts you need to build such things, and how do you make sure they fit together without spending enormous amounts of time in various online parts shops?
Re:DIY thermal vision shoots 360° panoramas by veli_joza on Tuesday April 18, 2017 @07:27AM (#14137916)
In my experience, either you get exposed to various parts at your workplace/college, or you stand on shoulders of similar projects.
Re:DIY thermal vision shoots 360° panoramas by Neliquat on Tuesday April 18, 2017 @10:01AM (#14138853)
3 ways.

1. Already know enough to glance at some spec sheets and build the rest in your head. Aka, lots of experince.

2. Execute a known good build configuration.

3. Combo of the 1st and 2nd points to suit your ability. Ask people with more knowledge for guidance. Maybe rebuild it once or twice.

Re:DIY thermal vision shoots 360° panoramas by SauliusLukse on Tuesday April 18, 2017 @08:03AM (#14138112)
Experience comes with practice :)
Re:DIY thermal vision shoots 360° panoramas by kozak on Tuesday April 18, 2017 @05:36AM (#14137452)
I always wanted to try to do this with RF wavelengths like 2.4 GHz.
Re:DIY thermal vision shoots 360° panoramas by awqrre on Tuesday April 18, 2017 @09:31AM (#14138636)
Re:DIY thermal vision shoots 360° panoramas by fudged71 on Tuesday April 18, 2017 @12:36PM (#14140260)
I'd forgotten about this project, really loved this!!
Re:DIY thermal vision shoots 360° panoramas by SauliusLukse on Tuesday April 18, 2017 @08:05AM (#14138117)
Can be done, just highly directional antennas are bulky and setup needs to be much bigger.