The amazing thing isn't just the degree to which they make mistakes it's the frequency. More often than not they are doing the job wrong.
If you have the knowledge to jack up your car then just do it yourself, it's really easy, even better if your car is such that you can reach the fluid valve by the wheel without jacking it up.
Buy a brake bleeder kit, it's a small bottle with hoses.
You'll need an assistant to press and release the brakes on command.
Keep an eye on the fluid reservoir and don't let it go dry or you'll waste even more time and fluid bleeding it. Keep it covered at all times, open it just long enough to fill - don't do it like the mechanics, who just leave it open since it's not their car and they don't care.
He stores his with brake fluid in it which seems to me to defeat the purpose of bleeding brakes because the weed sprayer isn't going to be any more resistant to moisture than the brake system in the car. I'll probably have him help me build my own and then use that.
There is also a tool library around here that may have an actual pressure bleeder I can rent.
Leave brake fluid stuff to the experts. If you manage to get any moisture or air into your brake systems, say goodbye to your brakes. Back when I had a car, I did everything by myself except brakes, engine works and steering - mess up on these three and you can end up dead.
That isn't true at all. You just bleed the air out, it's really easy, I've done it multiple times using just a small $5 brake bleeding bottle.
The only way you'd get enough water in your brake system for it to cause a problem is if you poured it in there, or left it open for several days.
> Back when I had a car, I did everything by myself except brakes, engine works and steering - mess up on these three and you can end up dead.
The brakes are the easiest [major] thing of all to to fix on a car. Your caution was completely unnecessary.
Yeah but when the brakes fail (or the steering, or the engine seizes) you usually end up injured or dead.
If you have had a licensed mechanic dealing with the life-critical stuff and it turns out that it was the fault of the mechanic then you can at least sue his insurance for damages after the fact (or, if you die, your dependants can sue, e.g. for widowers' benefit). It also protects you from being sued by others in case your screw-up causes an accident.
Unfortunately, their insurance didn't cover dropping the gas tank that was in the way of replacing the brake lines, so then I had the fun of driving to the next nearest place two miles away with only a handbrake and engine compression to slow me down. Fun times!
However, no brake system is perfectly water right because it has moving parts. Flushing the system periodically removes this moisture before it can accumulate to a level that will cause significant corrosion of the internal brake parts.
You are right to be concerned about moisture, that's actually why they need bled. BMW suggests bleeding them roughly every other oil change because no system is perfectly water/moisture tight.
The nice thing about having my mechanic do it is they already have a place to do it and they deal with the waste fluid plus they also inspect the rest of the car and have a lot more experience with what to look for than I do. Preventative maintenance is a big deal on these cars so having an experienced mechanic look at it regularly puts my mind at ease.
I just recently started renting a friend's garage so I could rebuild my motorcycle so now that I have my tools and a space to do work I am much more likely to do this kind of thing myself.
A large C-clamp and the old pad work just fine.
It's a staggering level of incompetence.