Re:Tesla Model S: the story of a very short happiness and ex...
by mulmen on Tuesday January 31, 2017 @01:13PM
(#13533413)
A friend of mine actually made a pressure bleeder out of an old weed sprayer. I really like the idea of using that because it's easier to maintain the balance in he system and fully flush the old fluid.
He stores his with brake fluid in it which seems to me to defeat the purpose of bleeding brakes because the weed sprayer isn't going to be any more resistant to moisture than the brake system in the car. I'll probably have him help me build my own and then use that.
There is also a tool library around here that may have an actual pressure bleeder I can rent.
If you have the knowledge to jack up your car then just do it yourself, it's really easy, even better if your car is such that you can reach the fluid valve by the wheel without jacking it up.
Buy a brake bleeder kit, it's a small bottle with hoses.
You'll need an assistant to press and release the brakes on command.
Keep an eye on the fluid reservoir and don't let it go dry or you'll waste even more time and fluid bleeding it. Keep it covered at all times, open it just long enough to fill - don't do it like the mechanics, who just leave it open since it's not their car and they don't care.