Re:SpaceX concludes anomaly investigation, sets return to fl...
by greglindahl on Monday January 02, 2017 @03:38PM
(#13304274)
Note that the company that used to produce COPVs for SpaceX had a large explosion during testing at their factory. Some testing now takes place on barges at sea, and the huge carbon-fiber tank for ITS was also tested at sea.
Re:SpaceX concludes anomaly investigation, sets return to fl...
by robryan on Monday January 02, 2017 @09:30PM
(#13306204)
They have duplicated the failure at their test site, possibly a number of times. At least one was mentioned but there have been multiple explosions.
Re:SpaceX concludes anomaly investigation, sets return to fl...
by lutorm on Monday January 02, 2017 @03:21PM
(#13304122)
It doesn't specify whether the mechanism proposed to have caused this particular anomaly has been experimentally verified to be able to cause ignition but, even if it had, it would still not prove it was the mechanism that was at work in this particular instance.
Re:SpaceX concludes anomaly investigation, sets return to fl...
by asmithmd1 on Monday January 02, 2017 @03:39PM
(#13304286)
Yes, proposing a theory and reproducing a result experimentally doesn't prove anything - but it is the basis of all science.
Re:SpaceX concludes anomaly investigation, sets return to fl...
by lutorm on Monday January 02, 2017 @04:37PM
(#13304764)
My point is that the wording "several credible causes for the COPV failure" does not imply they haven't experimentally verified that those causes can cause a COPV failure, which you seemed to imply.
Re:SpaceX concludes anomaly investigation, sets return to fl...
by tbabb on Monday January 02, 2017 @04:39PM
(#13304777)
Who says they didn't repro the failure?
Re:SpaceX concludes anomaly investigation, sets return to fl...
by ghshephard on Monday January 02, 2017 @02:49PM
(#13303827)
I also found it a little surprising with so much involved that they didn't take the effort to reproduce the failure case, perhaps doing so on a smaller scale than a full vehicle launch if possible.
Re:SpaceX concludes anomaly investigation, sets return to fl...
by snrplfth on Monday January 02, 2017 @03:06PM
(#13303989)
The problem is that accurately reproducing this failure case is very difficult. You need to replicate the thermal properties of the loading process and the tanks, at the same speed with the same amounts of propellant and helium, effectively meaning that you have to do it with a full-size tank, and with a large amount of pad equipment. This is all extremely dangerous and almost certainly will result, if successful, in the loss of the testing stand.
"breaking fibers or friction can ignite the oxygen in the overwrap"
I would like to see at least this ignition source duplicated.