News for hackers. Stuff that matters.
Re:Axial stack battery design could unlock the era of supers... by etwigg on Tuesday September 27, 2016 @01:12PM (#12591183)
> Once you are no longer combusting fuel, all of that compression is simply wasted energy.

Not true. Instead of burning fuel, you can use electricity (something like an arc welder) to generate heat. And the efficiency with which that heat is turned into mechanical power will be dependent on the compression ratio, regardless of whether the thermal energy is coming from electricity or burning fuel.

Thermal energy in chemical fuel and the potential energy in a battery or a raised weight have the same units, but there's actually a difference. You can turn energy in a battery or a raised weight into mechanical energy with 100% efficiency - not achieved in practice, but there's no theoretical limit.

When you turn thermal energy into mechanical energy (via Otto cycle in a car or Brayton cycle in a jet), the peak efficiency you can achieve has a theoretical limit based on how much you can compress the working fluid (air) before injecting thermal energy (burning fuel or an electric arc).

So if you've got electic energy that you can turn into mechanical energy in a fan with 100% efficiency, why would you take the thermodynamic losses of "burning" that electricity? Because we don't know how to go supersonic speeds with a fan or propeller - the only way we know how, for now, is with a jet running on the brayton cycle. And all the advances we've made in high compression fuel-burning jets would apply to electric jets just as well.

If you're okay limiting your top speed to ~Mach 0.7, then you're correct spinning a large propeller using electricity is absolutely a better way to go, and you can make that propeller a lot bigger if you're able to tilt it.

Karem Aircraft has done extremely interesting work on figuring out how to tilt rotors, and much of their research would apply to electric motors as well: http://karemaircraft.com/

Re:Axial stack battery design could unlock the era of supers... by Florin_Andrei on Tuesday September 27, 2016 @03:10PM (#12592185)
> Instead of burning fuel, you can use electricity (something like an arc welder) to generate heat.

Egads, no. Please get out of the business of being limited by thermodynamics in your engines. The Carnot cycle is a hard stop whenever heat is being coaxed into doing mechanical work. You don't want that.

Just convert electricity into mechanical work directly.

Re:Axial stack battery design could unlock the era of supers... by etwigg on Wednesday September 28, 2016 @06:33PM (#12601890)
That's a great goal to have! But if you're putting energy into a flow using a propeller or fan, aerodynamic stall means that each propeller can only put a limited amount of energy in. This is why jet engines have so many compressor stages - each one adds as much energy as it can without stalling out:

https://en.wikipedia.org/wiki/Gas_turbine#/media/File:J85_ge...

In the engine pictured, which has 8 compressors in a row, the energy which those fans are able to put into the flow is miniscule compared to the energy that you can dump in by burning fuel (or electricity) in the tiny combustion chamber.

F-16 in afterburner is consuming 64,000 pounds of fuel per hour = 18 pounds per second A pound of Jet-A has 20 MJ per pound.

So that's 360 MW of thermal power. Even if you're only turning 10% of that into usable thrust, that's 36MW of power.

Here's what a 35MW power plant looks like: http://www.power-technology.com/projects/ctds_chp/ctds_chp5....

The people working on electric jets are well aware of the Carnot limit, and it's true that they don't want that. But for now, we'd need a lot of new tech to put 35MW of thrust power into a flow using electric motors and fans. Heck, we need a lot of new tech to put 350MW of power electronics onto an airplane!! My only point is that I don't think we should look down our noses at the people working on thermodynamic machinery. Until we can do better, they're the best we've got :)

Re:Axial stack battery design could unlock the era of supers... by nickff on Tuesday September 27, 2016 @01:23PM (#12591286)
>"Not true. Instead of burning fuel, you can use electricity (something like an arc welder) to generate heat. And the efficiency with which that heat is turned into mechanical power will be dependent on the compression ratio, regardless of whether the thermal energy is coming from electricity or burning fuel."

Turning chemical energy (low entropy energy) into electrical energy (low-medium entropy) into thermal energy (high entropy) to make mechanical energy (of intermediate) would be incredibly inefficient. Combustible fuels are much better than batteries at making things hot; I don't have the time to run the numbers right now, but what you are saying is incredibly wasteful. Please take a thermodynamics course.

Fans are commonly used on supersonic aircraft. Most modern fighter aircraft use medium or low bypass turbofans, which are using fans to go supersonic. Turbofans are less efficient than turbojets over Mach ~1.6-1.8 (or in reheat), but a ducted fan could probably do better.

Re:Axial stack battery design could unlock the era of supers... by etwigg on Tuesday September 27, 2016 @01:44PM (#12591456)
You are correct that it's wasteful, if one joule of electric energy and one joule of chemical energy cost the same.

But if you are getting electric energy for free from solar panels, and you're getting chemical energy by pumping taxed dinosaur carbon into the air, then you might find that the electric energy could be more efficient.

You're absolutely correct that it's wildly inefficient by any metric now. But if clean electric energy became wildly abundant, that would change.

In computing, there are all kinds of wildly wasteful things (web browsers) that are the best way to do things because computation is extremely cheap. It's very interesting to think about what kinds of devices would make economic sense if electric energy had the same price collapse that computation has done.

The fact that we "burn electricity" in electric water heaters, stoves, and toasters rather than only using high-entropy energy sources like gas water heaters and gas stoves is an example where present-day electric energy supply chains have beaten out the theoretical advantages of only using high-entropy energy sources when it is possible to do so.

Re:Axial stack battery design could unlock the era of supers... by nickff on Tuesday September 27, 2016 @01:47PM (#12591473)
This is not about financial cost, it is about weight and complexity. It would be less costly and more efficient to separate water into hydrogen and oxygen (using solar power if you like), then use them to power a rocket engine.
Re:Axial stack battery design could unlock the era of supers... by etwigg on Tuesday September 27, 2016 @02:01PM (#12591578)
Aircraft weight turns directly into fuel cost via induced-drag. If electric energy is wildly inexpensive, you can afford very heavy airframes.

See https://en.wikipedia.org/wiki/Nuclear-powered_aircraft

Re:Axial stack battery design could unlock the era of supers... by nickff on Tuesday September 27, 2016 @02:10PM (#12591638)
There are two major problems with very heavy airframes:

1) Aircraft cost is proportional to empty weight.

2) Range is proportional to total stored energy / drag and drag is proportional to weight. If you have low specific energy, you cannot go far.

Re:Axial stack battery design could unlock the era of supers... by coredog64 on Tuesday September 27, 2016 @02:34PM (#12591822)
One more to add. Current commercial aircraft can jettison fuel to reduce the landing weight and minimize risk if the structure is compromised. Hard to see how this design would.
Re:Axial stack battery design could unlock the era of supers... by WalterBright on Tuesday September 27, 2016 @04:02PM (#12592632)
Jets also constantly lose weight while burning fuel. This results in airliners flying higher and more efficiently as the flight progresses. With batteries, you're kinda stuck with the weight.

And it's true that airliners take off with more weight than they are speced to land with. They have to dump fuel if landing before burning it off.

Re:Axial stack battery design could unlock the era of supers... by cmdrfred on Tuesday September 27, 2016 @05:56PM (#12593575)
No reason I can think of why you can't drop empty batteries in an emergency situation. In fact, you probably want swapable batteries to begin with, don't want to waste time on the tarmac charging up.
Re:Axial stack battery design could unlock the era of supers... by WiseWeasel on Tuesday September 27, 2016 @07:05PM (#12594034)
One reason would be if they're built into the wing surfaces, as this article proposes. You probably don't want to jettison your wings.
Re:Axial stack battery design could unlock the era of supers... by Retric on Tuesday September 27, 2016 @03:40PM (#12592422)
Even if it's free, converting energy to thrust at say 1:0.95 mechanically you can go faster vs. 1:0.35 with a heat engine.
Re:Axial stack battery design could unlock the era of supers... by ars on Tuesday September 27, 2016 @02:23PM (#12591744)
> But if you are getting electric energy for free from solar panels

If you are getting electrical energy for free I have some WAY WAY better uses for it than an airplane.

Let's save hydrocarbon fuel for mobile installation (planes and cars), and use the solar power for fixed installations (houses, industry).

Maybe once you maxed out houses, we can come back to the mobile stuff.

Re:Axial stack battery design could unlock the era of supers... by hx87 on Tuesday September 27, 2016 @01:47PM (#12591477)
> Instead of burning fuel, you can use electricity (something like an arc welder) to generate heat.

Why go through all the trouble of using electricity as the heat source in a Brayton cycle engine instead of the obvious solution, using electric motors? Your statement that "we don't know how to go supersonic speeds with a fan or propeller" is clearly wrong, since supersonic aircraft have been flying with turbofans and no afterburners for almost five decades now.

Re:Axial stack battery design could unlock the era of supers... by etwigg on Tuesday September 27, 2016 @01:59PM (#12591559)
When a jet engine burns fuel, some energy goes into turning the fan, and some energy goes into creating thrust.

At low-mach, the fuel burn is primarily producing torque which turns the fan. This fan could be turned by electricity.

At high-mach, the fuel burn is primarily producing pure thrust, and the fan portion hurts the engine's performance.

Supersonic turbofans are a compromise that have to produce thrust from takeoff through to high speed. I may be incorrect, but I don't believe we have ever built a ducted fan which can use pure torque to generate supersonic thrust, although I guess I don't see why it wouldn't be theoretically possible. We can put megawatts of energy into a fast-moving flow using thermal energy and a brayton cycle. In order to put megawatts of energy into fast-moving flow using rotors would require a totally new design - nothing like the supersonic turbofans currently in production.

Re:Axial stack battery design could unlock the era of supers... by nickff on Tuesday September 27, 2016 @02:23PM (#12591746)
You have to distinguish the conventional (high efficiency) cycle of a jet engine at low Mach, from the reheat (low efficiency) operation usually used for high Mach.

No engine (of which I am aware) has air flowing past the fan blades at supersonic speeds, because the trans-sonic transitions tear engines apart. There is one prototype aircraft (a naval derivative of the F-84) which did have a supersonic propeller, but it was very inefficient and loud. All jet engines compress sub-Mach 1 flows, then expand them at the very back of the engine to produce supersonic exhaust.

Re:Axial stack battery design could unlock the era of supers... by etwigg on Tuesday September 27, 2016 @02:49PM (#12591977)
> You have to distinguish the conventional (high efficiency) cycle of a jet engine at low Mach, from the reheat (low efficiency) operation usually used for high Mach.

Exactly. At high mach, almost all of the energy being put into the flow is from expanding combustion gases - not the compressor stage. If you wanted to go at supersonic speeds using only spinning fans, you will need a heck of a lot of fans. Maybe we could do it! But we haven't so far.

Re:Axial stack battery design could unlock the era of supers... by hx87 on Wednesday September 28, 2016 @01:10PM (#12599388)
I suppose one way to do so is to build an electro-thermal equivalent of a low-bypass turbofan, with a jet section to deliver high-velocity thrust and a fan section to deliver low-velocity thrust.
Re:Axial stack battery design could unlock the era of supers... by chrisseaton on Tuesday September 27, 2016 @02:16PM (#12591693)
> supersonic aircraft have been flying with turbofans and no afterburners for almost five decades now

But part of a turbofan's thrust is from gasses from burning jet fuel and air expanded by the heat form that isn't it? Nobody has flown supersonic without burning fuel except in a dive, have they?

https://en.wikipedia.org/wiki/Fastest_propeller-driven_aircr...

So you can have an electric motor to power the fan, but what about the turbine part?

Re:Axial stack battery design could unlock the era of supers... by thom_nic on Tuesday September 27, 2016 @01:22PM (#12591261)
This idea of an electrical-arc jet engine is new to me. Can you point to any published material on such a design or prototype? Very intriguing.
Re:Axial stack battery design could unlock the era of supers... by nickff on Tuesday September 27, 2016 @01:25PM (#12591308)
Nobody who has taken a course in energy conversion (an second or third level thermodynamics course) would even bother to propose this. It is not coincidental that all mechanical engineers take this course, and mechanical engineers are also the people who design engines.
Re:Axial stack battery design could unlock the era of supers... by etwigg on Tuesday September 27, 2016 @02:05PM (#12591600)
If you take a course in energy conversion, and also an economics course, then you would consider this.

https://en.wikipedia.org/wiki/Nuclear-powered_aircraft

Some joules are more expensive than others :)

Re:Axial stack battery design could unlock the era of supers... by nickff on Tuesday September 27, 2016 @02:25PM (#12591763)
The nuclear aircraft did not fail because nuclear power was too expensive, they failed because reactors were too heavy. If you read more about the American nuclear aircraft programs, you will find that they were most interested in using the heat from Nuclear reactions to warm up air; they did not propose to generate electricity with which to heat or push air (because it is too complex and inefficient).
Re:Axial stack battery design could unlock the era of supers... by vitus on Tuesday September 27, 2016 @06:41PM (#12593831)
Right. A nuclear reactor generates massive amounts of heat from fission, then uses that heat to boil water (sometimes heavy water for better radiation shielding) to make steam to cause turbines to spin, which generates the electricity. (in fact, fossil fuel burning plants also use this steam-electric model)

If the end goal is to generate heat, then there's no good reason to add those additional steps.

Re:Axial stack battery design could unlock the era of supers... by rayiner on Tuesday September 27, 2016 @07:02PM (#12594006)
Using an RTG producing electricity as a heat source in a Brayton-cycle engine was on my Jet-Pro final exam in college.
Re:Axial stack battery design could unlock the era of supers... by mrfusion on Tuesday September 27, 2016 @01:37PM (#12591407)
Very interesting! I had no idea we could convert our existing jet engine technologies to electric.

Could the Same conversion apply to scram jets?

Re:Axial stack battery design could unlock the era of supers... by nickff on Tuesday September 27, 2016 @01:43PM (#12591448)
You can do this, but it is roughly equivalent to using a battery pack to heat water for a steam engine; it is a very bad idea.
Re:Axial stack battery design could unlock the era of supers... by etwigg on Tuesday September 27, 2016 @02:03PM (#12591589)
Which was seriously considered during the cold war: https://en.wikipedia.org/wiki/Nuclear-powered_aircraft

As bad of an idea as using javascript to do addition rather than assembly. You're assuming electric energy is the same order of magnitude cost as electric energy. It's possible that could change some day.

Re:Axial stack battery design could unlock the era of supers... by nickff on Tuesday September 27, 2016 @02:16PM (#12591688)
Even if cost is not a factor, it is still a bad idea to heat water with electricity in weight and time-critical applications. For instance, if you want to heat water using solar power, you should focus sunlight on the water in a black container rather than using photovoltaic (PV) solar panels.