Re:Devastating Amazon hardware review of a wireless power sw...
by StavrosK on Friday July 01, 2016 @11:58AM
(#12017203)
It looks like you connect 3.3V/GND/TX/RX to the four pins shown in this image:
http://dl.itead.cc/IM151116002/sonoff-parts-without-433.jpg
Then you flash it with PlatformIO as usual, except I'm not sure which pins are connected where, that would take some fiddling. I'll buy one to experiment with.
http://www.nfriedly.com/techblog/2015-12-16-itead-sonoff-sla...