The WiFi industry is working on a standard, called the Fine Timing Measurement protocol, which is now part of IEEE 802.11.[3][4] That provides 100ps resolution timestamps in WiFi packets. That takes care of the RF layer, and provides resolution to about 3cm. (Real world accuracy won't be that good.)
As with GPS, you need at least four fixed stations to get a fix, and preferably line of sight to five, so you can compute the error. You might get that in a big room such as a convention center or gym. If you need it in a house, you'd probably need some additional nodes that are mostly for location, not passing data traffic.
There's no technical problem doing this; it just hasn't been valuable enough to be deployed widely yet. It will probably be a free feature in fixed WiFi nodes soon.
[1] http://www.eecs.harvard.edu/~konrad/projects/motetrack/moteT... [2] http://estimote.com/indoor/ [3] http://www.wi-fi.org/beacon/rolf-de-vegt/never-lost-indoors-... [4] http://www.ieee802.org/1/files/public/docs2014/asbt-kbstanto...
My reference is the fact that 1588 systems usually get into the <25ns RMS offset realm.
This might not even make sense, but maybe they're talking about using the recovered clock from the incoming signal? Something like synchronous Ethernet?
The link posted doesn't go in to much detail, but I'd like to learn more.
At certain multiples of a distance, with synchronized clocks, you'll have offset X between channel Y and Z (on channel Y you may be perfectly phase synchronized, but Z is half the phase off).
Measuring the offsets for multiple sets of frequencies allows you to calculate multiple sets of possible distances, to then figure out which exact distance it is that repeats among all of the calculated distance multiples (like 1, 2, 3; 0.5, 2, 4; 1.5, 2, 3 - the number 2 occurs everywhere).
If for example you're perfectly in phase on 10 frequencies, the distance between you must be a must be a specific shared multiple of the wavelengths of all the frequencies. Least common denominator.