Everything I'm seeing these days with AI research seems to be about developing systems that learn for themselves. Rather than telling the robot/AI exactly how to behave in a given situation, it's about allowing the robot/AI to experience as many situations as possible and learn what the appropriate response should be so that in the future it can independently identify and react accordingly.
The former approach works fine for a factory floor robot that is in a controlled environment but doesn't lend itself well to other situations. An example might be a biped robot walking up a mountain and it falls. Most of the examples I've seen, the Boston Dynamics one included, have the robot detect it's falling and put itself into a crash position where it remains until it comes to a rest before attempting to recover.
If your robot is rolling down a mountain it might be destroyed before it comes to a rest. Having a feedback loop, reflex reactions and the ability to access the situation and recover dynamically would be much more useful.
Agreed. But none of that implies learning. So why are you talking about learning in the beginning of your comment?
This happens all too often in AI conversations. Learning gives you a special and powerful kind of flexibility, of course. But not being able to learn doesn't imply it can't cope with an infinite range of situations. A robot that's unable to learn could be programmed with enough flexibility to walk on any surface it could possibly encounter.
Basically, flexibility and the ability to deal with novel situations is close to synonymous with the ability to learn.
How exactly?
Which is a nice way to say that robotics really hasn't progressed that much in a sense an outsider would see as progress (where progress on outsider-terms would be Boston-Dynamics style robots that can, say, learn task and repeat them), though I'm sure researchers can point to a lot of progress on their terms.
Which is a nice way to say that robotics really hasn't
progressed that much in a sense an outsider would see as
progress
I work in mobile robotics, and I can tell you that there hasn't been a lot of progress.I wrote a post four years ago about all the various huge showstopping technical challenges facing mobile robots: http://c1qfxugcgy0.tumblr.com/post/31187427192/the-enduring-...
Basically nothing has changed since then.
To have a useful anthropomorphic robot you need better:
batteries
actuators
software
computers
Only in software and computers are we seeing fast progress. (Big improvements in ConvNet algorithms, and the fast video cards you need to run them) But actuators need to be more powerful and much lighter, and batteries need to store at least ten times as much power. Progress in these fields has been slow, since energy storage is a mature field, and you don't see routine doubling of performance like you do with CPUs.And, of course, an economically useful anthropomorphic robot has to be dirt cheap, as well.
Indeed, people talking about this subject often don't realize that humans are really cheap in many if not most circumstances (Boston Dynamics is working on poison-gas-protection-suit testing robot. Finally figured out a job a person wouldn't do).
And it's an evil equation where once a given task is mastered by robots, it makes humans cheaper in many other tasks - because it increases the competition and because it decreases the cost of maintaining the human.
So we've seen incremental automation and steadily declining living standards. Not a world that screams out the benefits of technology.
E.g. "Why would I do that for that much? I don't have any driving physical needs pushing me to poison/injure myself performing a dangerous menial tasks for minimum wage." Which puts a floor on human desire to do basic jobs. Which helps continue to support investment in improving automation/robotics. Which makes the world a better place.
Which actually sounds a lot like a carbon tax and the struggles alternative energy sources have gone through. Call it a self-aware employment tax.
[0]http://tedxtalks.ted.com/video/Walking-and-Running-Bio-Inspi...
I do see the power source as being an issue. Many of the most impressive robots are tethered, but even a tethered humanoid robot could be extremely useful.
Stationary industrial robots, the only real success story of robotics, have great speed and power, at the cost of incredible weight and power consumption.
Consider the Motoman EPX2050.
http://www.motoman.com/datasheets/EPX2050.pdf
15Kg payload, pretty okay, (Try holding a 15Kg weight at arm-length) but it masses 540Kg and has a rated power consumption of 5KW. (Three-phase power, of course) And that's just the arm! The NX100-FM controller it's specced with masses another 120Kg.
Mobile robots hate weight. Cutting weight forces a lot of other compromises, in speed, power, and cost.
http://www.bostondynamics.com/robot_Atlas.html
EDIT: Also for the Motoman, is it possible it needs so much power because of how fast it can move that 15 kg mass around ? There's no beating conservation of energy.
There's your problem right here. The video demo shows it walking freely, but I bet it can only do that for short stints.
The PR2 I discussed in the blog post does indeed have a lithium ion battery pack. It has a 1.3kWh capacity, (188 times bigger than an iPhone 6's battery! Probably part of the reason the robot massed 220 kilos) which gave it a rated... 2 hours of runtime.
Lithium ion is better than earlier battery chemistries, but it's still not very good: https://upload.wikimedia.org/wikipedia/commons/thumb/c/c6/En...
You can run electric motors far above their continuous rated values for short periods. Also, electric motors specifically designed for brief overloads (high-temperature insulation, temperature sensors) are quite possible. Every automobile starter motor is such a motor. With synchronous brushless motors ("brushless DC" and "variable frequency synchronous" motors are the same thing; motors above a few KW tend to be called the latter) and big power IGBTs, you can have huge torques briefly without much difficulty. If you have the electric power available.
Batteries, maybe. Running time between charges is going to be a problem for a long time to come. There's a huge battery industry trying to get energy density up, with modest success. For many applications, trailing a power cord most of the time is an option. Especially if the robot can plug itself in, which the Hopkins Beast was doing in the 1960s.
[1] http://www.gizmag.com/siemens-world-record-electric-motor-ai...
The problem is not power density, but torque density. Brushless motors spin really, really fast with low torque, which is the exact opposite of what we need for robots.
SCHAFT found a solution to the more current problem with their ultracapacitor driven water cooled motors. Except one cannot drive said motors continuously and alone they still don't have that much torque, so if one wants more torque more windings must be added.
You can design motors for higher torques at lower speeds but the torque density suffers. Luckily we have compact high reduction gearing to transform high speed low torque to low speed high torque.
If the charging time was close to zero, would this problem be solved, for many applications ?
Or the other alternative, phinergy's aluminum air battery, which has 2000 wh/kg, but cannot be recharged, just replaced and "recycled", but probably in a cost effective way ?
I think the thing that Google has recognized is that cutting edge robotics research that takes advantage of the work they have already done in deep learning doesn't require the kind of robots that Boston Dynamics (or many of the other companies they bought) build. Cutting edge robotics (from the perspective of learning systems) is back at the level of getting a single arm and a camera to learn basic tasks. In fact, there is a lot of research that can be done in simulation with these new deep methods that doesn't even require hardware.
The software and learning systems they can develop will very likely make their way into super advanced complex hardware like Atlas in the future, but for now it's probably not the best use of their time.