Indeed, people talking about this subject often don't realize that humans are really cheap in many if not most circumstances (Boston Dynamics is working on poison-gas-protection-suit testing robot. Finally figured out a job a person wouldn't do).
And it's an evil equation where once a given task is mastered by robots, it makes humans cheaper in many other tasks - because it increases the competition and because it decreases the cost of maintaining the human.
So we've seen incremental automation and steadily declining living standards. Not a world that screams out the benefits of technology.
E.g. "Why would I do that for that much? I don't have any driving physical needs pushing me to poison/injure myself performing a dangerous menial tasks for minimum wage." Which puts a floor on human desire to do basic jobs. Which helps continue to support investment in improving automation/robotics. Which makes the world a better place.
Which actually sounds a lot like a carbon tax and the struggles alternative energy sources have gone through. Call it a self-aware employment tax.
[0]http://tedxtalks.ted.com/video/Walking-and-Running-Bio-Inspi...
I do see the power source as being an issue. Many of the most impressive robots are tethered, but even a tethered humanoid robot could be extremely useful.
Stationary industrial robots, the only real success story of robotics, have great speed and power, at the cost of incredible weight and power consumption.
Consider the Motoman EPX2050.
http://www.motoman.com/datasheets/EPX2050.pdf
15Kg payload, pretty okay, (Try holding a 15Kg weight at arm-length) but it masses 540Kg and has a rated power consumption of 5KW. (Three-phase power, of course) And that's just the arm! The NX100-FM controller it's specced with masses another 120Kg.
Mobile robots hate weight. Cutting weight forces a lot of other compromises, in speed, power, and cost.
http://www.bostondynamics.com/robot_Atlas.html
EDIT: Also for the Motoman, is it possible it needs so much power because of how fast it can move that 15 kg mass around ? There's no beating conservation of energy.
There's your problem right here. The video demo shows it walking freely, but I bet it can only do that for short stints.
The PR2 I discussed in the blog post does indeed have a lithium ion battery pack. It has a 1.3kWh capacity, (188 times bigger than an iPhone 6's battery! Probably part of the reason the robot massed 220 kilos) which gave it a rated... 2 hours of runtime.
Lithium ion is better than earlier battery chemistries, but it's still not very good: https://upload.wikimedia.org/wikipedia/commons/thumb/c/c6/En...
You can run electric motors far above their continuous rated values for short periods. Also, electric motors specifically designed for brief overloads (high-temperature insulation, temperature sensors) are quite possible. Every automobile starter motor is such a motor. With synchronous brushless motors ("brushless DC" and "variable frequency synchronous" motors are the same thing; motors above a few KW tend to be called the latter) and big power IGBTs, you can have huge torques briefly without much difficulty. If you have the electric power available.
Batteries, maybe. Running time between charges is going to be a problem for a long time to come. There's a huge battery industry trying to get energy density up, with modest success. For many applications, trailing a power cord most of the time is an option. Especially if the robot can plug itself in, which the Hopkins Beast was doing in the 1960s.
[1] http://www.gizmag.com/siemens-world-record-electric-motor-ai...
The problem is not power density, but torque density. Brushless motors spin really, really fast with low torque, which is the exact opposite of what we need for robots.
SCHAFT found a solution to the more current problem with their ultracapacitor driven water cooled motors. Except one cannot drive said motors continuously and alone they still don't have that much torque, so if one wants more torque more windings must be added.
You can design motors for higher torques at lower speeds but the torque density suffers. Luckily we have compact high reduction gearing to transform high speed low torque to low speed high torque.
If the charging time was close to zero, would this problem be solved, for many applications ?
Or the other alternative, phinergy's aluminum air battery, which has 2000 wh/kg, but cannot be recharged, just replaced and "recycled", but probably in a cost effective way ?
I wrote a post four years ago about all the various huge showstopping technical challenges facing mobile robots: http://c1qfxugcgy0.tumblr.com/post/31187427192/the-enduring-...
Basically nothing has changed since then.
To have a useful anthropomorphic robot you need better:
Only in software and computers are we seeing fast progress. (Big improvements in ConvNet algorithms, and the fast video cards you need to run them) But actuators need to be more powerful and much lighter, and batteries need to store at least ten times as much power. Progress in these fields has been slow, since energy storage is a mature field, and you don't see routine doubling of performance like you do with CPUs.And, of course, an economically useful anthropomorphic robot has to be dirt cheap, as well.