News for hackers. Stuff that matters.
Re:Winning Hyperloop design revealed by MIT engineers by tbabb on Thursday February 04, 2016 @12:01AM (#11032095)
Maglev, huh. Does that imply the track has to have embedded coils / permanent magnets? If so, seems like that pretty much explodes the cost, no?
Re:Winning Hyperloop design revealed by MIT engineers by om42 on Thursday February 04, 2016 @12:10AM (#11032131)
There were a couple designs at Design Weekend including MIT's design where they use passive magnetic system instead of the active magnetic systems (Maglev) found on most high speed trains. By inducing Eddie-currents, they don't have to rely on embedded coils, just permanent magnets. Supposedly the teams using the passive magnetic system say the costs are low enough currently since you save power (no high power usage) and don't need to lay out specialized coils on the track.

There are couple difference designs that will be tested at Design Weekend, including the air bearings proposed in the alpha paper along with magnets and wheels.

Re:Winning Hyperloop design revealed by MIT engineers by tbabb on Thursday February 04, 2016 @12:17AM (#11032162)
Curious what the heat losses are on eddy currents. I guess we'll see...
Re:Winning Hyperloop design revealed by MIT engineers by InclinedPlane on Thursday February 04, 2016 @03:06AM (#11032633)
It's not maglev.

For fuck's sake, can people at least read the wikipedia entry on the topic before commenting on it?

It uses an air cushion to reduce friction, it uses linear induction motors to accelerate trains along a route, most of the time it will cost. That means the fixed costs of the whole thing are low. The cars are pretty simple and low cost. The accelerators are also simple and make up a tiny fraction of the length of a track. Most of the track is just a partially evacuated tunnel, which is cheaper to build than a maglev track.

Re:Winning Hyperloop design revealed by MIT engineers by tbabb on Thursday February 04, 2016 @03:19AM (#11032667)
> It's not maglev

Oh wow, this is too much.

From the article:

> "The MIT pod has magnet skis that lift it during high-speed cruising"

So, in your own words, "For fuck's sake, can people at least read the article before commenting on it?"

The was the whole reason I brought it up. The original design called for air bearings; the MIT team did something apparently far more expensive. This is concerning.

Re:Winning Hyperloop design revealed by MIT engineers by Already__Taken on Thursday February 04, 2016 @03:52AM (#11032748)
Air bearings require a fairly tight tolerance as to the design of the tube for the entire run no? So I don't think it's a given magnets could be more costly if it means you use more expensive track materials but not a high precision construction.

Any with air bearings or magnets both being a passive track on-going costs might favor the one geological events disrupt less.

Re:Winning Hyperloop design revealed by MIT engineers by tedsanders on Thursday February 04, 2016 @03:25AM (#11032681)
Please be kinder to others.

Although the Hyperloop concept uses an air cushion for levitation, the winning pod from MIT was indeed levitated by magnets: http://news.mit.edu/2016/mit-students-win-first-round-spacex...