Chromebooks work like that, too. Like, if you want to change shit on it without verification (say, to install Linux), you need to switch to "Developer mode" which cannot be done remotely, you need to push a pencil into a hole on the Chromebook or something like that.
Routers usually sit outside the firewall in typical network designs. The backdoor listens to raw network traffic coming in for the trigger, before any firewall rules on the router itself are processed.
All in all, it is very well designed and part of an extremely advanced attack.
http://www.cisco.com/c/en/us/support/docs/security-vpn/secur...
A cisco router with a blank config will come up with all interfaces configured "shutdown" and with no passwords set. You access it via a serial port on the front, labeled "Console". It provides a command line almost, but not quite, entirely unlike a unix shell :-) where you enter commands (ping, show routing tables, ..) or configuration statements (config terminal // Interface FastEthernet 0/0 // ip address 10.1.1.1... // no shutdown).
If the only thing you do is to give it an ip-adddress on an interface and enable it, it will have a passwordless login via telnet.
Every ISP/network department not run by complete imbeciles will have a "standard config" regarding login and passwords: Ours back in the days was a TACACS server for running user authentication, setting access levels for particular users (and automated logins for configuration management) and logging of logins/executed commands. You can also configure access lists that logins are only allowed from specific IP addresses. Probably also have a hardcoded password as fallback when the authentication server isn't reachable, disable the console port for when your router isn't in a locked box, ...
If your lab allows internet access, you would probably be exploited within seconds of booting for the first time.
There are sophisticated ways to employ very unsophisticated exploits.
Then you log in and install a patched firmware containing your backdoor.
It's hardly Cisco specific. Surely any router (or any device for that matter)that has a known default username and password can be exploited in this way?
Am I missing something here?