A cisco router with a blank config will come up with all interfaces configured "shutdown" and with no passwords set. You access it via a serial port on the front, labeled "Console". It provides a command line almost, but not quite, entirely unlike a unix shell :-) where you enter commands (ping, show routing tables, ..) or configuration statements (config terminal // Interface FastEthernet 0/0 // ip address 10.1.1.1... // no shutdown).
If the only thing you do is to give it an ip-adddress on an interface and enable it, it will have a passwordless login via telnet.
Every ISP/network department not run by complete imbeciles will have a "standard config" regarding login and passwords: Ours back in the days was a TACACS server for running user authentication, setting access levels for particular users (and automated logins for configuration management) and logging of logins/executed commands. You can also configure access lists that logins are only allowed from specific IP addresses. Probably also have a hardcoded password as fallback when the authentication server isn't reachable, disable the console port for when your router isn't in a locked box, ...
If your lab allows internet access, you would probably be exploited within seconds of booting for the first time.
There are sophisticated ways to employ very unsophisticated exploits.