News for hackers. Stuff that matters.
Re:Hawaii First to Harness Deep-Ocean Temperatures for Power by dogma1138 on Friday September 04, 2015 @08:47PM (#10173464)
It does't work that way crystals will still form, and salts mean free ions free ions mean corrosion.....
Re:Hawaii First to Harness Deep-Ocean Temperatures for Power by Dylan16807 on Friday September 04, 2015 @09:25PM (#10173553)
If you evaporate half of seawater, you're still down at one quarter of salt's saturation level. That will form crystals even if you keep things mildly mixed?

Corrosion is a worry, but isn't that something you can fix with material choice?

Re:Hawaii First to Harness Deep-Ocean Temperatures for Power by sandworm101 on Friday September 04, 2015 @10:15PM (#10173650)
Corrosion is an immense problem with salt water in large systems. Eliminating dissimilar metals across so many parts is tricky. Even then, unless you're going to plate everything in gold, corrosion will happen. The far easier solution is a heat exchanger between the saltwater and some other working fluid (ie radiator fluid) inside the system. I'm a bit surprised that the hawaii rig is pumping in actual sea water rather than dropping a radiator into the depths. That intake pipe will corrode eventually.
Re:Hawaii First to Harness Deep-Ocean Temperatures for Power by dredmorbius on Saturday September 05, 2015 @04:12AM (#10174277)
Indeed, it is. I think I was vaguely aware of them previously, but I ran across a reference to sacrificial (galvanic) anodes a ways back. Fascinating.

https://en.wikipedia.org/wiki/Galvanic_anode

A galvanic anode is the main component of a galvanic cathodic protection (CP) system used to protect buried or submerged metal structures from corrosion.

They are made from a metal alloy with a more "active" voltage (more negative reduction potential / more positive electrochemical potential) than the metal of the structure. The difference in potential between the two metals means that the galvanic anode corrodes, so that the anode material is consumed in preference to the structure.

Essentially, the galvanic anode is "sacrificed" as corrosion attacks it rather than other bits of your mostly-metal structure in salt water.

Re:Hawaii First to Harness Deep-Ocean Temperatures for Power by dogma1138 on Friday September 04, 2015 @10:03PM (#10173623)
Don't know most system that use that use the cold water for heat exchanging and have a closed / open sweet water loop for the actual cooling. But from every thing I've seen salt tends to accumulate on any surface under the right put a lid on a salt water container and the salt will form on the lid just with the internal evaporation/condensation cycle through sublimation

But there's only a handful of such systems in the world https://en.wikipedia.org/wiki/Deep_water_source_cooling

The largest is in Canada and they use sweet water, Norway and Finland have salt water systems that use water from the baltic sea but they seem to be simpler as they pump it into large water reservoirs under the city which won't really work for Hawaii.

Other limitations like the fact that the US builds with wood and drywall/plaster while Europe (and many other parts of the world, which were either deforested centuries ago or wasn't that much forested in the 1st place) uses concrete and concrete like blocks/materials almost exclusively even for internal walls might make it not that applicable for residential cooling.

Re:Hawaii First to Harness Deep-Ocean Temperatures for Power by deelowe on Saturday September 05, 2015 @12:42AM (#10173973)
> Corrosion is a worry, but isn't that something you can fix with material choice

Not really.