Re:How to Achieve 20Gb and 30Gb Bandwidth through Network Bo...
by jing on Friday July 17, 2015 @05:55PM
(#9905586)
DAC is an order of magnitude cheaper than optical and might be fine for their use based on their comments of cat6 v cat6a and "short runs in their lab".
Also, if they are using two or three NICs per box, you'd need to factor in the cost of two / three of the X540's vs. a single 40gbe connection and you'd need to double the cost-per-port of the switch vs the 40gbe option.
Re:How to Achieve 20Gb and 30Gb Bandwidth through Network Bo...
by kev009 on Friday July 17, 2015 @06:27PM
(#9905726)
Also intel NICs aren't a very good deal, and the driver quality isn't what it once was in common *nixes. The stateless 2x10g and 2x40g cards from Chelsio are cheaper and all around better IMHO.
Re:How to Achieve 20Gb and 30Gb Bandwidth through Network Bo...
by virtuallynathan on Friday July 17, 2015 @06:18PM
(#9905696)
Yep, that is also a very good point!
Re:How to Achieve 20Gb and 30Gb Bandwidth through Network Bo...
by virtuallynathan on Friday July 17, 2015 @06:13PM
(#9905660)
Quanta T5032-LY6 + Cumulus Linux = < $250/port, hw only is ~$215/port. 1m QSFP+ twinax is $40. Your all-in port cost for a server is ~$600-650. These guys are paying ~$1800 for 3x10G.
100G switches are now at <$500/port ($470 before discounts).
10G is now around $65/port.
Huh? Show me a 40Gbe switch for that much per port. The cheapest I see is around $500 per port, plus you need the cabling which can be from $200-$300. Though I agree, I'd rather pay more for the more reliable speed.