News for hackers. Stuff that matters.
Re:How to Achieve 20Gb and 30Gb Bandwidth through Network Bo... by virtuallynathan on Friday July 17, 2015 @05:01PM (#9905308)
Is it not just cheaper/easier to buy a 40GbE NIC for $350-400 at that point? A 40GbE switch is < $250/port.

EDIT: I see they are using RJ45-based 10GbE - this can end up being more expensive and power consuming than SFP+ based stuff (fiber/twinax).

Re:How to Achieve 20Gb and 30Gb Bandwidth through Network Bo... by nickpsecurity on Friday July 17, 2015 @05:02PM (#9905317)
He did mention redundancy as a benefit.
Re:How to Achieve 20Gb and 30Gb Bandwidth through Network Bo... by brianwawok on Friday July 17, 2015 @05:38PM (#9905488)
But if he needs 20Gb.. he needs 20Gb all the time. You can't just slap two 10Gb cards and call it "20Gb redundant"

You either need two 20Gb+ cards, or three 10Gb cards.

Re:How to Achieve 20Gb and 30Gb Bandwidth through Network Bo... by Sanddancer on Friday July 17, 2015 @06:25PM (#9905720)
Sometimes you just need 20Gb most of the time, yet still have availability. Given other bits and pieces of their architecture, occasionally having a box that's temporarily a bit slower shouldn't be a terribly huge issue. It's a cost/benefit tradeoff.
Re:How to Achieve 20Gb and 30Gb Bandwidth through Network Bo... by nickpsecurity on Friday July 17, 2015 @06:35PM (#9905750)
Exactly
Re:How to Achieve 20Gb and 30Gb Bandwidth through Network Bo... by pixl97 on Friday July 17, 2015 @05:42PM (#9905504)
>A 40GbE switch is < $250/port.

Huh? Show me a 40Gbe switch for that much per port. The cheapest I see is around $500 per port, plus you need the cabling which can be from $200-$300. Though I agree, I'd rather pay more for the more reliable speed.

Re:How to Achieve 20Gb and 30Gb Bandwidth through Network Bo... by jing on Friday July 17, 2015 @05:55PM (#9905586)
DAC is an order of magnitude cheaper than optical and might be fine for their use based on their comments of cat6 v cat6a and "short runs in their lab".

Also, if they are using two or three NICs per box, you'd need to factor in the cost of two / three of the X540's vs. a single 40gbe connection and you'd need to double the cost-per-port of the switch vs the 40gbe option.

Re:How to Achieve 20Gb and 30Gb Bandwidth through Network Bo... by kev009 on Friday July 17, 2015 @06:27PM (#9905726)
Also intel NICs aren't a very good deal, and the driver quality isn't what it once was in common *nixes. The stateless 2x10g and 2x40g cards from Chelsio are cheaper and all around better IMHO.
Re:How to Achieve 20Gb and 30Gb Bandwidth through Network Bo... by virtuallynathan on Friday July 17, 2015 @06:18PM (#9905696)
Yep, that is also a very good point!
Re:How to Achieve 20Gb and 30Gb Bandwidth through Network Bo... by virtuallynathan on Friday July 17, 2015 @06:13PM (#9905660)
Quanta T5032-LY6 + Cumulus Linux = < $250/port, hw only is ~$215/port. 1m QSFP+ twinax is $40. Your all-in port cost for a server is ~$600-650. These guys are paying ~$1800 for 3x10G.

100G switches are now at <$500/port ($470 before discounts).

10G is now around $65/port.