News for hackers. Stuff that matters.
Re:Credit card terminals have used same password since 1990s... by mikeash on Friday April 24, 2015 @11:59AM (#9434200)
Yes. We're just now transitioning to chips. My cards are gradually being replaced with chip cards, starting last year. In October of this year, new rules will come into effect that basically require all cards and terminals to use chips, by putting the liability for fraudulent magstrip transactions onto whatever party was responsible for not being able to use a chip. (In other words, merchants will foot the bill for fraud if they don't upgrade their terminals.)

We're taking our time, but we're finally moving there.

Edit: despite having chip cards, I've yet to be able to use the chip in the US. Many places now have chip-enabled terminals, but often not set up to use the chip part, and after a few failed attempts I just gave up on it.

Re:Credit card terminals have used same password since 1990s... by ams6110 on Friday April 24, 2015 @02:18PM (#9435096)
In October of this year, new rules will come into effect that basically require all cards and terminals to use chips

How does this affect Square and similar peripheral readers for mobile devices? Will users of those now be liable for fraud?

Re:Credit card terminals have used same password since 1990s... by mikeash on Friday April 24, 2015 @02:25PM (#9435139)
Good question. Looks like the answer is, yes, you will be liable just like anybody else, and just like other providers, Square will start providing chip readers. They have a page about it here:

https://squareup.com/emv

Interestingly, it looks like this may be the end of the model where the reader is so cheap they can give it away for free, as they list it for $29.

Re:Credit card terminals have used same password since 1990s... by Nursie on Friday April 24, 2015 @02:49PM (#9435307)
I do quite like their tiny reader, and I'm wondering if it uses some sort of modem for comms over the audio port...? Kinda cool.
Re:Credit card terminals have used same password since 1990s... by mikeash on Friday April 24, 2015 @02:57PM (#9435351)
I believe they've been using a modem sort of setup for a while, and this is probably the same sort of thing.

Their original reader was pretty much a magnetic reader head hooked straight to the microphone port, decoded by Square's software on the phone. You could record your card's stripe using a voice recorder program (I tried it for fun) and you'd get this fun squeaking noise from it.

Square's competitors eventually tried to discredit them by pointing out that this data was unencrypted, and that meant that Nefarious People could Steal your Precious Card Data using a Square reader. Square eventually responded by changing over to a reader that encrypted the magstripe data before communicating it to the phone, meaning there must be some sort of digital communication happening over the audio port.

Re:Credit card terminals have used same password since 1990s... by Nursie on Friday April 24, 2015 @03:04PM (#9435395)
OK, that's interesting, I had assumed that the older readers had simply transmitted the analogue signal generated by moving the mag strip through the reader, and was wondering if maybe the new one just attached to the mini-jack port and did its actual comms over bluetooth. But if they've already got a digital data transmission system in place then that's a whole different game.

Thanks for the insight!

Re:Credit card terminals have used same password since 1990s... by notatoad on Friday April 24, 2015 @02:26PM (#9435150)
here's Square's FAQ page for the liability shift. the short answer seems to be yes, starting in october if you're using square you're liable for any fraud.

https://squareup.com/townsquare/emv/

Re:Credit card terminals have used same password since 1990s... by mrchucklepants on Friday April 24, 2015 @12:11PM (#9434264)
This happened to me at Costco the other day. Chip capable terminal but it didn't do anything. The guy at the register had never seen anyone try to use it before. He didn't even know the new slot was there.
Re:Credit card terminals have used same password since 1990s... by hobarrera on Saturday April 25, 2015 @01:46AM (#9437379)
> by putting the liability for fraudulent magstrip transactions onto whatever party was responsible for not being able to use a chip.

What about tourists and alike?

Re:Credit card terminals have used same password since 1990s... by mikeash on Saturday April 25, 2015 @11:58AM (#9438664)
No idea. There might be different rules for foreign cards. Otherwise, the card issuer which could have issued a chip card but didn't would be liable, as I understand it.