The reliability of the engine itself is way misunderstood. They aren't more or less reliable than any other engine (okay, they're way more reliable than Subaru engines...).
The problems are with heat and lubrication. The early RX8s had a flawed design. 2nd and 3rd Gen RX7s had problems with their OMPs and terrible electrical problems. 2nd gens have really weak alternators stock. Turbos usually fail before engines do.
Honestly the engine itself is awesome. Yes, if you lose a seal it will screw your engine (but usually the housings & rotors are salvageable). Piston engines throw rods and screw your whole car. If you bypass the OMP and run premix and actually do proper maintenance on your car, they will last. My 10AE has over 110k miles on it and has not blown up yet -- probably has another another 40k on it before it'll be ready for a rebuild. I still am on the stock OMP (it's an S4).
That's really low. I don't think I've ever bought a car with only 110k miles on it...
The 10AE year was 1988...
I had a toyota land cruiser with 365,000km on rebuilt engine and 800,000 km on the body though.
Where do you live that 110k miles is low mileage? How many miles is a lot to you? How/why are people driving that much?
That's largely because of the need to salt roads in the canadian winters - yearly, excessive exposure to salt water drastically limits the possible lifetime of a car. The further away from cold weather requiring salted roadways you get, the longer cars last.
I'm really curious where the parent lives that people are investing so much in the longevity of a vehicle. By the time they get to 300,000 km even if they aren't rusty they are usually 20 years old and things like drivetrain start to go and the vehicle is not worth the cost to keep up the required maintenance.
Now to be fair, SoCal has a rather unique and essential car culture, so this is probably an outlier as far as "most" cities go.
Older cars, you keep them relatively clean and knock your boots before getting in so that the salt doesn't grind your carpets away, and replace things as they start to fail. A lot of older cars will just keep on chugging along.
Not all places use salt, and even then if you get your car washed and underbody cleaned it should help the longevity of the car.
Are Subaru engines really unreliable? I was under the impression that as long as you kept the power output under about 300 wheel horsepower that the entire drivetrain is pretty reliable.
But you're mostly right. They will last if you leave the car 100% stock. Just don't modify them. Ever.
They're really cool motors, I'm in that boat with you. How they work means forced-induction doesn't necessarily impact engine life the same way FI on piston/crankshaft motors. That the piston motor is just going to last longer not needing or before it needs major restoration.
A mildly interesting point is that heat isn't an easily mitigated factor, unless we're talking the exact use cases in the OP article -- generators, which run in a very controlled RPM band. Same when we talk about UAV engines or other electricity-generation applications. So, you can engineer the motor to be efficient at those rotation speeds WRT heat management and fuel efficiency.
1: https://books.google.de/books?id=IB2lMFqTTl8C&pg=PA117&lpg=P...
But they will have a shorter overall lifespan. That large moving inner chamber and the outer chamber walls around it will wear down, and when they fail you replace a significant amount of that combustion chamber (or just junk the entire motor).
It's a neat application of the technology, and particularly in contexts where either the motor is going to run for long periods at a specific speed or not be used all the time, it could make a great option for power generation.