I think MakerBots biggest problem is that they've marketed (and with Gen5, designed) their products as being "consumer ready" when they're far from it.
With the huge brand name of MakerBot, I can't help feel that this is going to create a setback for the 3D printer market. It's just sad.
High quality desktop CNC Mills are out.
$3000 for a proven technology. Home-made CNC mills have always come in between $1000 to $3000, and now professional turnkey solutions are available in that price range.
I do realize CNC machines are the "opposite" of a 3D Printer. But if a CNC machine can get a software stack as easy to use as the 3d printers, then I think they'd get a lot more use.
I'd really like to see PocketNC deliver.
Milling software remains a problem. For 3-axis machines and simple work, there's the Cut2D/Vcarve/Aspire line, which is easy to use. Most work at TechShop uses that program. At the high end, there's Hypermill - $22,000 a seat, but you get your money's worth.[1] Look at the videos of it controlling a 5-axis machine, with long thin tools working deep through narrow openings, without screwing up. In the middle, there's SprutCam, from Russia, which is startup-grade software - clever, but buggy. (I've used it.) Since in the CNC business, bad software results in rejected parts and tool and machine damage, buyers are unwilling to buy bad software.
There's some open source software for CAM, but it's below Cut2D, which is considered entry level.
Or if your RPM was too high and you smell burning, you drop it down on the next run.
In the worst case, if you catastrophically fail at those numbers and break say an end-mill ($20 to $50), that's still not that big of a deal. A major mistake / catastrophe still is cheaper to deal with than regular maintenance of say... a Form 1 stereo lithography plastic that costs something like $150 per liter.
I'd bet you that MeshCAM (again, free with the Nomad, $200ish otherwise) will create more precise parts than your typical Makerbot stuff anyway. Waterfall + Pencil Finish is more than enough to get the majority of projects done. (Steriolithography from Form1 looks... very impressive though, but the running costs are absurd in comparison)
ArtCAM, and other professional toolsets, are probably much better suited for professional artists who need to keep track of the grain of wood and the cutting direction. But... you can ignore the details of wood-grain and still come up with something with far more detail and precision than anything Makerbot can ever hope to do.
Basically, you start to care about those minor details with CNC machines because you actually have a machine that has such accuracy that those details matter. Also, $5 wood blocks and $20 leather (Drag Knife on a CNC machine: https://www.youtube.com/watch?v=bMoRUZnvbXw) honestly feel more "artisan" than the $100+/liter plastic that comes out of a Form1.
They have problems at two levels. At one level is that their management isn't very nice and thus the internal culture appears to be very strained. At least if you read the comments from about 50-60 former and current employees on one of those "employee satisfaction" websites whose name escapes me at the moment (Glass Door?).
They went from a very open company embracing open source and the Maker culture, to a closed company that was about pushing products that were not mature in order to meet revenue demands from their new owners. Their new owners being one of the big names in an industry that has been defined by patenting the fuck out of everything and then holding progress back for dear life. (High end 3D printers are the ultimate razor-blade business model -- with the slight difference that the razor handle isn't exactly cheap. Ask someone who owns a high end printer and they'll be able to tell you how insanely expensive they are to run).
At the more obvious level, Makerbot are in trouble because they have made a defective product. It would have been okay if the product was still "open" so users could service the parts or upgrade components, but now you can't.
In particular they have made an extruder that fails on almost every level. From the badly designed hotend that has an entirely wrong temperature gradient, to the non existing adjustment of idler wheel pressure, the unnecessary custom designed hobbed wheel, the lack of gearing on the stepper, meaning that it is too weak to do its job (look for "tick of death"), the fact that you can't open the extruder without voiding the warranty and risk breaking off the tabs to hold it together and the various Z-axis calibration problems which means that automatic offset measurement both results in the wrong distance AND it takes more time on EVERY print than it takes to calibrate the Z-offset on a manual printer ONCE.
The upshot of this is very frequent printing malfunctions, an extruder that is only guaranteed for 200 hours of operation before it has to be replaced, and if the extruder clogs, you have to send it in to have it cleared. (Extruder clogs can happen at any time. I've had extruders clog after just 2 hours). In Norway a new extruder costs about 4000,- NOK ($510)the last time I checked. For moderate use while prototyping you need between one and two new extruders per month, plus you need a population of extruders big enough to guarantee that you have extruders on hand when sending back extruders for repair.
You can calculate how many times over a year you pay the price of a new printer in spare parts alone. The Makerbot is a fucking expensive machine to run. (Yet not as expensive as the big high end printers from 3DS, Stratasys etc)
(Of course, in real life, time is worth more, so you fix the clogged extruders yourself and void the warranty).
So no, it is not about high end versus low end processes. Most people who are in the market for FFF (FDM) printers know precisely what the process can deliver. And there are printers that reliably deliver the expected results. Makerbot's fifth generation printers are not among them.
While the Osborne effect might have been a contributor to their earlier troubles, it isn't what is ailing them now. In fact, you would have to ignore half a dozen bigger issues before you would desperately reach for the Osborne effect.
(I have a Makerbot fifth gen at work and we've gone through three extruders before just giving up. The thing doesn't work. I occasionally update the firmware and the desktop software to see if things have improved, but there really isn't that much you can do when the key problem is horrendeously inept mechanical design.
I also have a Makergear M2 at home which (in Norway) costs about half of what the Makerbot costs, and which has worked impeccably for months now. After 4 monts the extruder mount started breaking apart. So I quickly printed a new one (before it broke completely) and replaced it. It cost me about $2 and it took 90 minutes from I discovered the cracks until I had the new part mounted. Apart from that I have had no problems and have had to replace no other parts)
It started when they initially refused to credit RepRap with all the open-source stuff they included in MakerBot. They then proceeded to bury the credit when they finally gave it.
They claimed they were putting a lot of unique IP in, but realistically in v1 it was just a different case.
Ultimately MakerBot tried to cash in on a trend, by taking a lot of open source design and building a product around it - but failing to do so in a open friendly fashion, and not understanding how to do product management.
in considering lowering costs i suppose the question is who is assessing these costs: an individual, or a company
form1 is interesting but at 3.3k that is quite expensive for an individual
there is an effort for a 100$ stereolithographic printer called the peachy printer
comparing specs:
pP(i) form1(ii)
resolution .2mm 20-200microns(.02-.2mm)
build vol ?inf?* 125×125×165
software open closed
price printer 100$** 3.3k$
price resin 60$ 150$
* peachy's design is formless, seemingly only limited by the tank volume and struts
** 100$ self assembly, 400$ fully built
when the peachy is finalised and in the hands of users i think this build volume aspect will be a source of very interesting experimentation and debatepeachy was impressive when it started its effort and has steadily improved but the really impressive element of the campaign for me is the transparency of development(iii), and the ethics of its staff(iv)
also the software is opensource : https://github.com/PeachyPrinter
.
(i) http://www.peachyprinter.com/#!printer-specs/c1gk6
(ii) http://formlabs.com/products/form-1-plus/
I don't speak for my employer at all, but I'm pretty excited that they should be out in the wild Really Soon(tm).
The frontier in 3D printing seems to be to get the cost down on the high-end processes, which are now very good. The Form1, the low-end stereolithography printer, is a nice little machine, and it's real. TechShop SF and Hacker Dojo in Mountain View both have one. Form1 charges $145/liter for the working fluid, so that's how they make their money.
Eventually, somebody is going to get low-cost laser sintering of metal powder figured out. But not quite yet. The Aurora Labs 3D metal printer turned out to cost about 10x the original $4000 price. MatterFab hasn't shipped their device. There's a low-end electroplating printer, but that's inherently a very slow process.
[1] http://gizmodo.com/why-3d-printing-is-overhyped-i-should-kno...