News for hackers. Stuff that matters.
Re:Building a 3D Printed Electric Jet Powered Snowboard by grimmdude on Wednesday April 08, 2015 @05:10PM (#9344023)
Seems like using thrust is going to be a limitation here. What about some kind of belt that contacts the ground when activated?
Re:Building a 3D Printed Electric Jet Powered Snowboard by erobbins on Wednesday April 08, 2015 @06:24PM (#9344517)
you could also add a seat for when you get tired of standing, and maybe a steering mechanism as well, and a cowling to cut down on wind resistance.

I think this idea could disrupt the powered snowboard industry.

Re:Building a 3D Printed Electric Jet Powered Snowboard by darkmighty on Wednesday April 08, 2015 @09:04PM (#9345203)
I like the idea. If you have a surface to react against, why not use it? It doesn't change the functionality, so it isn't just becoming a snowmobile as others claim, you just have to set it up so it maintains ability to slide.

I think a pair of small tracks on the back with some kind of speed sensors to make it coast without drag is ideal (think bike coasting system with drag compensation).

Re:Building a 3D Printed Electric Jet Powered Snowboard by scoggs on Wednesday April 08, 2015 @07:22PM (#9344834)
He would either need to cut a space for the track into the board (there goes an expensive board if the results are poor) or put two tracks on either side of the board like training wheels. I don't think either makes sense as the first is too destructive and risky and the second will severely limit turning even more and most likely add unneeded weight.
Re:Building a 3D Printed Electric Jet Powered Snowboard by grimmdude on Thursday April 09, 2015 @01:09PM (#9349133)
Or hang it off the back perhaps
Re:Building a 3D Printed Electric Jet Powered Snowboard by branchan on Wednesday April 08, 2015 @05:14PM (#9344040)
Then he would just be making a snowmobile.
Re:Building a 3D Printed Electric Jet Powered Snowboard by grimmdude on Wednesday April 08, 2015 @05:15PM (#9344056)
Similar, but you'd be standing on it and there's no steerable front. Much different if you ask me.
Re:Building a 3D Printed Electric Jet Powered Snowboard by NeutronBoy on Thursday April 09, 2015 @12:38AM (#9345809)
Almost a hybrid snowmobile/hovercraft